Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

3438 FG Body detailing kit Truck

Product information "3438 FG Body detailing kit Truck"

Genuine FG spare/option part.

Contents:
  • 1 set

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

3258 FG Rear bumper 1834/Atego
Original FG Ersatz-/Tuningteil.Suitable for 1834 and Atego body shells. Bumper is delivered not painted but inclusive the mounts.Inhalt:1 StückPainting tips:

€43.75*

Average rating of 0 out of 5 stars

5438 FG Body detailing kit for Mini Cooper/Trophy, Porsche
Genuine FG spare/option part. Suitable for FG Mini Cooper / Trophy bodies.The set includes:WiperRight/left mirrowsDoorhandleRoof antennaMounting screws for the mirrows

€19.00*

Average rating of 0 out of 5 stars

3109 FG Rear rim insert Trucks
Genuine FG spare/option part. Required for scale rim appearance. Suitable for 3105/02.Dimensions:Outside diameter: 100 mmInside diameter: 25 mmContent:2 pieces

€19.90*

Average rating of 0 out of 5 stars

3108 FG Front rim insert Trucks
Genuine FG spare/option part.Required for scale rim appearance.Suitable for FG no.: 3105/02.Dimensions:Outside diameter: 100 mmInside diameter: 25 mmContents:2 pieces

€19.90*

Average rating of 0 out of 5 stars

y3069/01 Vehicle decals Atego
Decal set for FG Atego truck.Dimensions:400 x 150 mm

€12.90*

Average rating of 0 out of 5 stars

85424 HPI Rear Hub carrier
Genuine HPI spare/option part. Content:1 set

€24.99*

Similar products

Average rating of 0 out of 5 stars

4412 FG Driveshaft boots
Genuine FG spare/option part. Suitable for all FG models and other. To complete one car you need two sets.For 2WD models you need two sets and for 4WD models you need four sets.Contents:2 pieces

€19.90*

Average rating of 0 out of 5 stars

4411/06 FG bearing set with grease filling EVo/Competition
Genuine FG spare/option part. FG ball bearing with heat resistant grease filling up to 180°. Therefore essentially improved durability of the wheel bearings and the clutch bell.For all FG cars with alloy differential case except 4WD and Formula 1.Contents:Eight pieces: 8 x 22 x 7 mmTwo pieces: 10 x 22 x 6 mmTwo pieces: 10 x 19 x 7 mmTwo pieces 15 x 28 x 7 mm

€35.95*

Average rating of 0 out of 5 stars

3262/01 FG Vehicle decals set CAT-Truck
Genuine FG spare/option part.Contains the stickers of the headlights, the rear lights and the radiator grill.Not included are the advertising labels for the original design. Please order separate.Dimensions:435 x 145 mmContents:1 piece

€16.10*

Average rating of 0 out of 5 stars

4173/01 FG Vehicle decals Audi R8 LMS
Genuine FG spare/option part. Contains the vehicle specific decals for an original appearance.Contents:1 set

€49.50*

Average rating of 0 out of 5 stars

4152/01 FG Audi A4 DTM flaps
Genuine FG spare/option part. The set includes two pieces of white flaps with screws.Fits body shells 4149 and 4149_01.Contents:1 set

€12.90*

Average rating of 0 out of 5 stars

3152/01 FG Extended rear mount Trucks
Genuine FG spare/option part. Rear body mount, bolts to rear shock stay. Suitable for Atego and Mercedes Benz 1834.Dimensions:Total length: 65mmLength until body support: approx. 55mmContents:1 piece

€15.50*

Average rating of 0 out of 5 stars

3259 FG Body set Street Truck 4WD
Genuine FG spare/option part. Former: "MB 1834" Truck. The set contains the main body, the driver's cab, the driver's cab side parts and the body screws.The rear bumper won't be delivered and has to be ordered separate. The set is delivered not painted.Dimensions:Length: 870mmWidth: 435mmHeight: 390mmWheelbase: 535mmContents:1 setPainting tips:

€255.50*

Average rating of 0 out of 5 stars

3105/02 FG Rim 1:6 silver
Genuine FG spare/option part. Suitable for FG Truck models and 1:6 Off-Road models (Marder, Beetle and Pajero and many more).Rim with 18 mm square driveDimensions:Diameter: 120 mmWidth: 61 mmContents:2 pieces / 1 pair

€29.90*

Average rating of 0 out of 5 stars

3258 FG Rear bumper 1834/Atego
Original FG Ersatz-/Tuningteil.Suitable for 1834 and Atego body shells. Bumper is delivered not painted but inclusive the mounts.Inhalt:1 StückPainting tips:

€43.75*

Average rating of 0 out of 5 stars

4411/13 FG ball bearing set for 1/5 2WD, sealed, 14 pcs.
Genuine FG spare/option part.Fits too WB535 cars.Content:2 pieces: 10 x 19 x 7 mm2 pieces: 10 x 22 x 6 mm8 pieces: 8 x 22 x 7 mm2 pieces: 12 x 28 x 8 mm

€47.50*

Average rating of 0 out of 5 stars

4402 FG Alloy steering stop for alloy uprights
Genuine FG spare/option part. A buckling of the inner front wheel in curves becomes impossible when mounting the alloy steering stop.Suitable for 6103/05, 6103/06, 4403, 4403/01, 4404 and 4406.Dimensions:Length: 24 mmDiameter: 7 mmThread: M4 Contents:2 pieces

€13.90*

Average rating of 0 out of 5 stars

4171 FG Front body Audi R8 clear
Genuine FG spare/option part. Contents:1 piece

€52.95*

Customers also viewed

Average rating of 0 out of 5 stars

5014 FG RC-plate for 1:5/Truck/Leopard
Genuine FG spare/option part. Plastic radio plate for installation of up to 4 servos. Fits all FG street models (except Formula 1) and Leopard models.You will need FG #6118/05 for installation of any steering servo other than Hitec 805BB.Contents:1 piece

€19.90*
%

Average rating of 0 out of 5 stars

FG Challenge 510 Line BMW M3 E30 with 26 cm³ FG engine RTR
With this robust and reliable FG chassis, which is equipped with a powerful 26 cm³ combustion engine, you get the ideal entry into the fascinating "royal class" of large scale RC models as well as into the competition.A roll cage was installed for more rigidity and protection of the vehicle.The model has a 510 wheelbase. The models are built on a 4 mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in.Further equipment points are differential gear, 24 teeth steel pinion, oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings.Thanks to the numerous available option parts, you can upgrade your FG Challenge Line as required. Incl. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Dimensions:Length: 870 mmWidth: 392 mmHeight: 260 mmWheelbase: 510 mm

From €1,049.00* €1,189.90* (11.84% saved)

Average rating of 0 out of 5 stars

5160/05 FG Main part for 5160 Porsche GT2 body
Spare part for the FG 5160 Porsche GT2.

€169.95*

Average rating of 0 out of 5 stars

4152/01 FG Audi A4 DTM flaps
Genuine FG spare/option part. The set includes two pieces of white flaps with screws.Fits body shells 4149 and 4149_01.Contents:1 set

€12.90*

Average rating of 0 out of 5 stars

5160/02 FG front part for 5160 Porsche GT2 body
Spare part for the FG 5160 Porsche GT2.

€50.95*

Average rating of 0 out of 5 stars

Challenge Line 2WD 530E Electric Porsche 962C incl. ESC + Motor
Genuine FG spare/option part. The FG Touring and Sports cars at scale 1:5 are known for their high quality and very detailed bodyshells true to original. Also the technically fully developed chassis are worth mentioning. These models are now available with a high-torque brushless engine. Surface conditions with maximum grip assumed speeds above 100 km/h can be reached and steered controlled. E stands for electric power which is equivalent to extremely high torque, high speed and all this without any engine noise. The Challenge Line models are equipped with a powerful 800 - 1300 kV brushless Motor and a 150A brushless ESC. This control can be regulated simply via transmitter or optionally via the program card.The models are built on a 4mm aluminium chassis with rear wheel drive and double wishbones front and rear. All borings are countersunk. Fully adjustable front and rear double wishbone suspensions.Further equipment points are: differential gear, oil-pressure shock absorbers with volume control and external, adjusting ring for the initial tension of the spring. All rotating parts on ball bearings.Tires are glued on the rims.For all versions of the electric cars, the LiPo batteries and the matching charger, as well as the radio system and the steering servo (RTR) are required. In our shop selection, the RTR set is available for a surcharge.For hassle-free assembly, FG recommends using LiPo batteries 2x 2S or 2x 3S, with a maximum dimensions of 150 mm in length and 50 mm in width. The model comes with the EC8 connector system equipped.

From €849.90*

Average rating of 0 out of 5 stars

5438 FG Body detailing kit for Mini Cooper/Trophy, Porsche
Genuine FG spare/option part. Suitable for FG Mini Cooper / Trophy bodies.The set includes:WiperRight/left mirrowsDoorhandleRoof antennaMounting screws for the mirrows

€19.00*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Agency