Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

1001 Mecatech twin piston hydraulic brake, set incl. brake bleeding set

Product information "1001 Mecatech twin piston hydraulic brake, set incl. brake bleeding set"

Mecatech twin piston hydraulic brake

It is the best brake for RC cars in the large model range from teh Mecatech FW01 and can be retrfitted to many FG models.

Best quality for the highest demands!

- The main brake cylinder is equipped with volume compensation and ensures constant braking pressure with good metering.
- The brake calipers have a double-piston system and steel brake pads and teh epoxy brake discs ensure short braking distances.

Installation instructions!

Suitable for all FG off-road 2WD/4WD models (Leopard basis) and also for all FG off-road 2WD and 4WD models on a Marder basis with a laterally angled chassis such as (buggy / monster / stadium with original FG 700 ml tank) only with mounting base.
Mounting base for all FG Offroad models:


When installing in an FG Evo 2020, 2020.1, 2020.2 and FG Raceline you need the adapter plates y1515.

For FG Evo 12-14 models with the wishbone no. evo-2013-1-st-.html">1100/10 or 1100/11, the brake fits without additional accessories.

For FG Evo 04-08 models with the wishbones no. evo-04-08-1st-.html">1100/05 or 1100/05, the brake must be 1100/05.

When running wheel squares with Seeger ring, the ring has to be removed.

Not for FG Formula 1 models.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessories / Spare parts

Average rating of 0 out of 5 stars

y1515 AP adapter plates for 1001 Mecatech twin-piston in FG 2020
Genuine HT spare/option part. One each r/h and l/h adapter plate for installation of Mecatech twin-piston brake calipers on FG 2020 car uprights/spindles.Fits front and rear!Contents:1 x r/h adapter plate1 x l/h adapter plate4 x csh screw M3 x 10 mm

€19.90*

Average rating of 0 out of 5 stars

y1337 Epoxy P-R-M Race brake discs for FG / Smartech / Carson
Top quality epoxy P-R-M Race brake discs with 10 dirt slots for removing dirt and abrasion, which will be transferred to the outside by the discs rotation. The epoxy P-R-M Race brake disc provides an optimal deceleration of the car without the unwanted fading (poor braking performance due to increased heat buildup)! The best braking action when using the epoxy P-R-M Race brake disc is achieved by the combination of the epoxy brake discs and steel brake pads (8456 or y19218). The epoxy P-R-M Race brake discs fit mechanical front and rear brakes on FG / Smartech / Carson cars with brake pads 8456 recommended for these applications.1 pair (2 pieces) Dimensions: Outer diameter: 60 mm Thickness: 2 mmsocket for 18 mm square wheel drive

€22.90*

Average rating of 0 out of 5 stars

y0132 Linkage rod for MecaTech brakes, 2 pcs.
Item N° y0132Linkage rod for MecaTech brakes, 2 pcs.Linkage rods for actuating of MecaTech master brake cylinders.Dimensions:Length: approx. 165 mmDiameter: approx. 2 mm

€4.90*

Customers also bought

Average rating of 0 out of 5 stars

2012-13 Mecatech Carbon Fiber front Body Support
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€24.90*

Average rating of 0 out of 5 stars

y2012-01LL Complete low-friction Ball bearing set for FW01
Complete low-friction ball bearing set ABEC-7 for the Mecatech FW01, sealed on both sides.Set includes:Order no.:Dimensions:Position:Unit:Price:2012-32LL8/19/6Wheel8 pieces43,80 EUR2012-93LL10/19/5Clutch3 pieces21,50 EUR2012-110LL12/21/5Layshaft2 pieces14,90 EUR2012-175LL15/24/5Differential2 pieces15,90 EUR2012-58LL8/12/3,5 (Flanged)Stabiliser4 pieces21,90 EURTotal:19 pieces118,-- EURSet price: 79,90 EUR

€79.90*

Average rating of 0 out of 5 stars

2012-284 Mecatech Short Chassis Conversion Kit Double Servo Radio Plate
Genuine Mecatech spare/option part.Content:1 set

€417.00*

Average rating of 0 out of 5 stars

1000-14 Mecatech 90° fitting, 1 pce.

€12.80*

Average rating of 0 out of 5 stars

2012-36 Mecatech Square wheel Driver 14 mm
Genuine Mecatech spare/option part for the FW01.Content:2 pieces

€13.80*

Average rating of 0 out of 5 stars

y1528 Bearing puller for differentials
Genuine HT spare/option part. Bearing puller especially for the disassembly of ball bearings from differentials.The arms are reliably fixed at the set distance by an adjustment cone, which makes the use of this puller very easy. The thin hooks allow the use even with little space between ball bearing and differential.Dimensions: Min. opening width: 17 mm Max. opening width: 50 mm Max. height from the Clutch: 25 mmContents:1 piece

€19.90*

Similar products

Average rating of 0 out of 5 stars

y1129 Mecatech hydraulic brake Expert for FG, Carson and many more, incl. brake bleeding set
Genuine Mecatech spare/option part. Full-metal hydraulic brake (like the former hydraulic FG brake).The set consists of two complete brake calipers for right and left, and 2 brake units, hydraulic oil and all, necessary for installation, accessories (see also our pictures)One version fits front and rearFits onroad / offroad / monster and stadium cars from FG and othersNo need for alloy uprights!Fits Formular 1 models, Competition, Sportsline and E (in connection with alloy front uprights y0932Dimensions master brake cylinder:Height: 75 mmWidth: 48 mmDepth: 13 mmContents:1 set

From €179.90*

Average rating of 0 out of 5 stars

1001M Mecatech twin piston hydraulic brake for Mecatech star mount, set
Mecatech twin piston hydraulic brakeTwin piston hydraulic brakes with Epoxi rotors and steel brake pads for optimized braking performance. The master cylinders feature a volume compensation.Fits FG Evo 04 - 08, Mecatech FW01, Competition 07 - 08, Sportsline 08 and with pedestal in every FG offroad cars (buggy / monster / stadium with original FG 700 ml fuel tank).The brake fits without any further accessories on FG Evo-models which are equipped with the a-arms no. 1100/10 respectively 1100/11When running wheel squares with Seeger ring, the ring has to be removed.On FG Evo-models which are equipped with the a-arms no. 1100/05 respectively 1100/06, the brake has to be filled before the installation. In addition the ventilation nipple of the brake must be exchanged against the venting valve no. y0309Pedestal for installation for all FG Offroad-models: Mecatech twin piston hydraulic brake

€299.90*

Average rating of 0 out of 5 stars

9541 FG Hydraulic brake for front axle
Genuine FG spare/option part. Content:1 set

€384.95*

Average rating of 0 out of 5 stars

9540 FG Hydraulic brake for rear axle
Genuine FG spare/option part. Content:1 set

€384.95*

Average rating of 0 out of 5 stars

1001 Mecatech twin piston hydraulic brake, set incl. brake bleeding set
Mecatech twin piston hydraulic brakeIt is the best brake for RC cars in the large model range from teh Mecatech FW01 and can be retrfitted to many FG models.Best quality for the highest demands!- The main brake cylinder is equipped with volume compensation and ensures constant braking pressure with good metering.- The brake calipers have a double-piston system and steel brake pads and teh epoxy brake discs ensure short braking distances. Installation instructions!Suitable for all FG off-road 2WD/4WD models (Leopard basis) and also for all FG off-road 2WD and 4WD models on a Marder basis with a laterally angled chassis such as (buggy / monster / stadium with original FG 700 ml tank) only with mounting base.Mounting base for all FG Offroad models:9438/01 a> Aluminum wheel chockWhen installing in an FG Evo 2020, 2020.1, 2020.2 and FG Raceline you need the adapter plates y1515.For FG Evo 12-14 models with the wishbone no. evo-2013-1-st-.html">1100/10 or 1100/11, the brake fits without additional accessories.For FG Evo 04-08 models with the wishbones no. evo-04-08-1st-.html">1100/05 or 1100/05, the brake must be 1100/05.When running wheel squares with Seeger ring, the ring has to be removed.Not for FG Formula 1 models.

From €299.90*

Customers also viewed

Average rating of 0 out of 5 stars

1001 Mecatech twin piston hydraulic brake, set incl. brake bleeding set
Mecatech twin piston hydraulic brakeIt is the best brake for RC cars in the large model range from teh Mecatech FW01 and can be retrfitted to many FG models.Best quality for the highest demands!- The main brake cylinder is equipped with volume compensation and ensures constant braking pressure with good metering.- The brake calipers have a double-piston system and steel brake pads and teh epoxy brake discs ensure short braking distances. Installation instructions!Suitable for all FG off-road 2WD/4WD models (Leopard basis) and also for all FG off-road 2WD and 4WD models on a Marder basis with a laterally angled chassis such as (buggy / monster / stadium with original FG 700 ml tank) only with mounting base.Mounting base for all FG Offroad models:9438/01 a> Aluminum wheel chockWhen installing in an FG Evo 2020, 2020.1, 2020.2 and FG Raceline you need the adapter plates y1515.For FG Evo 12-14 models with the wishbone no. evo-2013-1-st-.html">1100/10 or 1100/11, the brake fits without additional accessories.For FG Evo 04-08 models with the wishbones no. evo-04-08-1st-.html">1100/05 or 1100/05, the brake must be 1100/05.When running wheel squares with Seeger ring, the ring has to be removed.Not for FG Formula 1 models.

From €299.90*

Average rating of 0 out of 5 stars

1001M Mecatech twin piston hydraulic brake for Mecatech star mount, set
Mecatech twin piston hydraulic brakeTwin piston hydraulic brakes with Epoxi rotors and steel brake pads for optimized braking performance. The master cylinders feature a volume compensation.Fits FG Evo 04 - 08, Mecatech FW01, Competition 07 - 08, Sportsline 08 and with pedestal in every FG offroad cars (buggy / monster / stadium with original FG 700 ml fuel tank).The brake fits without any further accessories on FG Evo-models which are equipped with the a-arms no. 1100/10 respectively 1100/11When running wheel squares with Seeger ring, the ring has to be removed.On FG Evo-models which are equipped with the a-arms no. 1100/05 respectively 1100/06, the brake has to be filled before the installation. In addition the ventilation nipple of the brake must be exchanged against the venting valve no. y0309Pedestal for installation for all FG Offroad-models: Mecatech twin piston hydraulic brake

€299.90*

Average rating of 0 out of 5 stars

y1129 Mecatech hydraulic brake Expert for FG, Carson and many more, incl. brake bleeding set
Genuine Mecatech spare/option part. Full-metal hydraulic brake (like the former hydraulic FG brake).The set consists of two complete brake calipers for right and left, and 2 brake units, hydraulic oil and all, necessary for installation, accessories (see also our pictures)One version fits front and rearFits onroad / offroad / monster and stadium cars from FG and othersNo need for alloy uprights!Fits Formular 1 models, Competition, Sportsline and E (in connection with alloy front uprights y0932Dimensions master brake cylinder:Height: 75 mmWidth: 48 mmDepth: 13 mmContents:1 set

From €179.90*

Average rating of 0 out of 5 stars

9541 FG Hydraulic brake for front axle
Genuine FG spare/option part. Content:1 set

€384.95*

Average rating of 0 out of 5 stars

9540 FG Hydraulic brake for rear axle
Genuine FG spare/option part. Content:1 set

€384.95*

Average rating of 0 out of 5 stars

1000-34/DOT4/DOT5 Mecatech seal
Genuine Mecatech spare/option part. Replacement part for Mecatech twin piston hydraulic brake.Compatible with the DOT4/DOT5brake fluid.Contents:1 piece

€5.50*

Average rating of 0 out of 5 stars

5189 FG Porsche 911 GT3R body shell, Wheelbase 530 mm, painted
Fits on all standard width touring car chassis' with 530 mm wheelbase, FG, Carson C5 chassis and most other 1/5 touring cars with the same wheelbase. The body shell is vac-formed from 2 mm Lexan. Replacement parts: 5192 FG Front Porsche 911 GTR3 R clear 5193 FG Rear Wing Porsche 911 GTR3 R clear Required body mounts:Mount front: FG 7020/17 Front bumperRear body mount: FG 7152/01 Rear body mountSide body mount front: FG 7014 Body mountsSide body mount rear: FG 7014 Body mountsDimensions:Length: 940 mmWidth: 415 mmHeight: 230 mmWheelbase: 530 mm

€299.95*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Agency