1100/05 FG Front lower alloy wishbone left Evo 04-08 - 1pce.
€58.50
Currently unavailable
Product information "1100/05 FG Front lower alloy wishbone left Evo 04-08 - 1pce."
Suitable for Evo 04-08 and all FG tourings cars with narrow front axle.
Distance rose joint/hinge pin 115 mm
Login
Alternatives
Genuine FG spare/option part. Through mounting the front lower alum. wishbones it is possible to fix the shock absorbers even flatter. The alum. shock absorber in the front is not needed anymore. The stabilizer was embedded lower in the wishbone in otder to gain more space for the damper springs. For the flattest damper position you need the longer damper fastening FG 7087/02. Suitable for FG EVO08-EVO12.Contents:1 piece.
Accessories / Spare parts
Suitable for , , , , , , , , , , and Elcon Monster-Truck front axle.A = 5 mmB = 6 mmC = 8 mmD = 13 mmContent:2 pieces
Genuine HT spare/option part. Dimensions:A = 5 mmB = 6 mmC = 8 mmD = 13 mmContents:2 pieces rose joints4 pieces conical spacers
Genuine FG spare/option part. Through mounting the front lower alum. wishbones it is possible to fix the shock absorbers even flatter. The alum. shock absorber in the front is not needed anymore. The stabilizer was embedded lower in the wishbone in otder to gain more space for the damper springs. For the flattest damper position you need the longer damper fastening FG 7087/02. Suitable for FG EVO08-EVO12.Contents:1 piece.
Customers also viewed
Genuine FG spare/option part. Through mounting the front lower alum. wishbones it is possible to fix the shock absorbers even flatter. The alum. shock absorber in the front is not needed anymore. The stabilizer was embedded lower in the wishbone in otder to gain more space for the damper springs. For the flattest damper position you need the longer damper fastening FG 7087/02. Suitable for FG EVO08-EVO12.Contents:1 piece.
Genuine FG spare/option part. Suitable for Evo 04-08 and all FG tourings cars with narrow front axle.Distance rose joint/hinge pin 115 mm.Contents:1 piece
Original FG spare part Front lower wishbone, right-hand side. For FG EVO 04-08 models. For stabiliser bracket 4mm. 1 piece
Genuine FG spare/option part. Contents:1 piece.
Genuine FG spare/option part. Competition gear shaft, hardened and ground.Suitable for all FG models except Formel 1 and FG 4WD.Dimensions:Length: 103 mmDiameter: 10 mmContents:1 piece
With this robust and reliable FG chassis, which is equipped with a powerful 26 cm³ combustion engine, you get the ideal entry into the fascinating "royal class" of large scale RC models as well as into the competition.The model has a 510 wheelbase. The models are built on a 4 mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in.Further equipment points are differential gear, 24 teeth steel pinion, oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings.Thanks to the numerous available option parts, you can upgrade your FG Challenge Line as required. Incl. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Dimensions:Length: 870 mmWidth: 392 mmHeight: 260 mmWheelbase: 510 mm