8601 FG Viscous coupling plates for viscous differential

€36.90*

Prices incl. VAT plus shipping costs

Available

Product number: fg_8601

EAN: 3410564523414

Product information "8601 FG Viscous coupling plates for viscous differential"

Fin package to mount into the viscous differential gear in order to increase the locking effect.

Suitable for .

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

8600/13 FG Shim 8x17x0,5 mm

Genuine FG spare/option part.Spare part for FG 8603.Part is delivered in silver or black color from vendor!Contents:4 piece

€5.70*

8610/10, FG Front axle w/h collar/ Square wheel driver 14 mm, set

Suitable for all FG front uprights. The use of this front axle prevents a pressing and jamming of the inner ball bearing rings when tightening the wheel. Suitable for square wheel driver 9,5mm and 14mm.

€23.00*

9014 FG Body mounts

Genuine FG spare/option part. Contents:2 piece

€15.10*

9014/01 Body mounts for CLK-GTR - 2pcs.

All measures in millimeters.

€15.10*

8939 FG Drift Tyres

Genuine FG spare/option part. Wheels with plastic treads for drifting.Dimension:Width: 65 mmDiameter: 110 mmContents:2 pieces

€118.95*

8600/11 FG O-Rings

Genuine FG spare/option part. Contents:1 set

€4.70*

Details

8600/06 FG Shaft seal 8x12x3mm - 2pcs.

Spare part for .

€13.90*

8602/01 FG Needle bearing 8x12x8mm - 2pcs.

Replacement bearing for visco differential. This bearing is narrower than the bearings in the other alloy diff cases.

€10.90*

8610/02 FG Square wheel driver 14mm f. 08610/01, 2pcs.

Item N° 08610/02 Square wheel driver 14mm f. 08610/01, 2pcs.Suitable for all FG front uprights with FG No. 8610/01 Front axle with collar, 1pce.

€13.90*

8600/02 FG Alloy case B for visc. differential - 1pce.

Spare part for .

€38.90*

8600/10 FG Drain screw M8x1 mm, 1 piece

Spare part for .Part is delivered in silver or black color from vendor!

€3.90*

8602/03, FG Steel flanged sleeve 8x12/ 16x5, 2 pcs.

Hardened and therefore highly wear resistant steel flanged sleeves for the viscous locking differential. Replace the bronze bushings 8602/2.

€6.50*

Customers also viewed

6546/01 FG receiver battery Ni-MH 6V/2000mAh

Genuine FG spare/option part.Affordable receiver battery Ni-MH 6V/2000 mAh for the electric power supply of receiver and servos, with JR-Graupner bush, rechargeable.Measures:Width: 112 mmHeight: 46 mmDepth: 23 mmUniversal

€23.90*

2020-15 Mecatech Bushing with screw for Mecatech 2020 clutch

Genuine Mecatech spare/option part. Contents:1 set

€7.00*

Details

6492 FG Steel spur gear 46T with adapter - set

Hardened steel spur gear for FG 1/6 off-road models, spur gear diameter 72 mm.Module: m=1,5

€97.90*

TT0990 Top Tuning Failsafe with kill switch and status LED for all transmitters

Genuine TT spare/option part.The new and improved failsafe modul.This kill switch module works with most FM and 2.4 GHz rc-systems. Not compatible with AVC-equipped receivers! You must have a free channel on your rc-system in order to install the module! This means at least a 3-channel radio for standard 1-servo brake/throttle setups or a 4-channel radio for dual brake servos driven by the radio's mixer function. With this module you can stop the engine with your radio. Additionally the module features a failsafe function which stops the engine when the rx-battery's voltage drops below a certain level or the rc-system has a glitch. A kill switch module fulfils two tasks. On the one hand, as a safety device, it is intended to shut off an engine with magneto ignition in case of failure of the remote control, and on the other hand, the engine can be stopped at any time by remote control.While the latter is mainly used for convenience, the safety aspect is what really matters.The failsave circuit integrated in all modern remote controls may brake the vehicle in the event of a radio interference, but this feature is dependent on the basic functionality of the receiver system and its power supply. However, if the receiver, the gas servo or the power supply fails completely, the failsave of the remote control can no longer do its job. The vehicle may be running haywire at full throttle.In these cases, the kill switch will cut the ignition of the engine and the vehicle will roll out without power.Features:Ready to install no soldering requiredRemote LED for easy-to-spot operational status (ignition live/killed)Optically coupled to isolate the ignition from the radio systemThreshold value for undervoltage protection (4V, 5V, 6V) adjustable with jumpers allows adaptation to the rx-battery type (LiPo, LiFePo, NiMH, NiCd)Contents:1 piece

€37.90*

8505 FG Mounting tool for bevel gear wheels - 1pce.

We essentially simplyfied the inserting of the differential bevel gear wheels with the mounting tool. Through the exact positioning of the bevel gear wheels it is guaranteed that the differential bevel wheel axle and the differential driving axle are in true alignment from the beginning.

€7.90*

8600/02 FG Alloy case B for visc. differential - 1pce.

Spare part for .

€38.90*