y1473 Extra strong duct tape, 50 mm x 50 meters

€6.90*

Available

Product number: y1473

EAN: 5024763112461

Product information "y1473 Extra strong duct tape, 50 mm x 50 meters"

Genuine HT spare/option part.

50 mm wide, extra strong duct tape, i.e. for repair of cracks in body shells or for preventative taping of RC car body shells.

Content:

1 piece / 50 meters

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Customers also bought

LOS250022 Losi Body Button Base and Top, Super Baja Rey / 2.0 / Super Rock Rey

Genuine Losi spare/option part. Contents:22 pieces

€9.99*

LOS250055 Losi Wing, FOX Racing, DBXL-E 2.0

Genuine Losi spare/option part. Contents:1 piece

€29.99*

y0735 Safety clip for Universal / JR / Futaba connectors

Genuine HT spare/option part. Protects the mated connection to prevent them from coming apart accidentally. Particularly recommended for direct power supply cords, as a tensile load on the cable can remove the link unnoticed and then you would perhaps think of a servo failure in the first place.The small size usually allows the installation even inside the receiver box.Also suitable for securing the connection of the receiver battery; the use of this clip means a big improvement in safety with little effort.Contents:1 piece

€1.50*

- GWH04-XM2 GRP W04 REVO XM2 Tyres Medium

This pair of Tyres have the following use indications: HIGH GRIP situation for clean track. HIGH GRIP situation for big asphalt. HIGH GRIP situation for high temperatures. This pair of Tyres have the following technical features: REVO treated profile for the maximum traction and the maximum lateral grip. Treated profile studied to maintain the tyre surface alway clean from rubber murble. Compound exclusively developped for model tyres. Inside belt flexible but very strong, vulcanized directly together with tyre compound. Insert foam with special material for high temperatures, for maximum stability and high drive precision. Spoked wheel moulded with special material for high temperatures for maximum grip and stability. Special gluing system 100% guaranteed.The main sizes for this tyre are: WHEEL fixing with square 18mm. TYRE outside diameter 118mm. WHEEL inside diameter 90mm. TYRE tota width 65mm. Note:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability. Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!

€38.90*

2009-8000 Mecatech Oil for shock absorber, 4000, 75ml

Genuine Mecatech spare/option part. Contents:1 piece / 75ml

Content: 55 Milliliter (€260.18* / 1000 Milliliter)

€14.31* €15.90* (10% saved)

This product is no longer available.

Similar products

y0789 Chassis mud flaps for Losi 5ive-T/2.0

Chassis mud flaps for the Losi 5ive-T, made of 1.0 mm extremely durable plastic material. The mud flaps are precisely contoured to follow the 5ive-Ts roll cage and body shell. Die-cut and ready for installation featuring 15 eyelets in 3 different sizes and 4 each form and hole punchings to fit the roll cage brackets. The set also includes complete hardware for installation and an illustrated manual! Dimensions of mud flaps (laying flat): 930 x 135 mm Set includes: 2 x protective cover (right and left) 6 x cable clip 14 x fixing screws 12 x washers 1 x manual

€49.90*

y0670 HT Color Ex color remover 100 ml

Special remover for Lexan (Polycarbonate) and for X- and XF-color, AS- and TS-color and many more painting system until 2-K color. Does not damage the body shell!For small corrections soak a cotton swap with Color ex. Use a lint-free cloth for large area applications.Color Ex comes in a glas bottle with child-proof bottle top.Contents:100 ml / 1 piece

Content: 100 Milliliter (€99.50* / 1000 Milliliter)

€9.95*

y0565 RC-Tech Flexa Fix body shell glue

Genuine HT spare/option part. For all epoxy models, plastic and polycarbonate/lexan body repairs!Direction of use:Use a brush or other applicator. Apply enough Flexa Fix to the damaged area. Be careful not to apply too much in one go as it can be difficult to manipulate. If necessary apply two or three coats to build up the joint area. Use epoxy blanket of pieces of polycarbonate (Lexan) to re-enforce if necessary.You can also use the Flexa Fix to re-enforce the body corners (let the pure product leak into the corners) or to make flexible battery packs.Contents:1 piece / 100 ml

Content: 100 Milliliter (€109.00* / 1000 Milliliter)

€10.90*

y0544 Sanding fleece Gold Microfine Pads, 100 x 80 mm

y0544 Grit: y0544/01 - 1000 grit, gold

Genuine HT spare/option part. Perfect surface preparation for paint jobs.Metal-free grinding fleece with a 1000, 1200 or a 1500 grit to roughen the inside of the body shell to improve paint adhesion. The flexible carrier of the fleece allows for a consistent, uniform contact with the work surface and makes it possible to prepare the polycarbonate to the smallest corner.Use it dry or wet when you rinse the body shell. The 1,500 grit (y0544//03) is especially recommended for metallic paint.Contents:5 pieces PadsPainting tips:

€4.90*

y6747/01 Model scissors with bent tips

Genuine HT spare/option part. Ideal for cutting polycarbonate body parts.Dimensions:Total length: 175 mmLength of edge: 35 mmContents:1 piece

€19.90*

y6747 Model scissors with straight cutter

Genuine HT spare/option part. Ideal for cutting polycarbonate body parts.Dimensions:Total length: 175 mmLength of edge: 35 mmContents:1 piece

€19.90*

y0306 Step drill for body work

Genuine HT spare/option part. Small and handy step drill, made of TiN-coated HSS steel with steps of 4/6/8/10/12 mm. Split point tip for good centering, 6 mm tri-flat shank for sure grip. For use with drills or with our hand chuck.Contents:1 piece

€9.90*

y0715 rc-car-online High tech mechanics gloves, nitrile, black

Genuine HT spare/option part. With non-slip surface perfect for delicate work, actually improving dexterity and grip.Available sizes: 8, 9 and 10.Glove size?Size 8 = 21 cm (S - L) circumferenceSize 9 = 24 cm (L - XL) circumferenceSize 10 = 27 cm (XL - XXL) circumferenceMeasure the circumference of your hand without the thumb and at the widest point (above the ankle). The tape measure should embrace the hand loosely.Norm EN388, Lining 100% polyamide.Partially coated with hightech nitrile Fits like a second skinGrips even when wetGood touch sensitivityLiquid-repellentGood resistance against oil and greaseContents:1 pair / 2 pieces3 pairs / 6 pieces

€8.90*

y1103 Body support

y1103 Size: y1103/01 - Small

Genuine HT spare/option part. You can select from two different sizes of body support.Dimensions small body support y1103/01:Length: approx. 80 mmWidth: approx. 16 mmDistance bore to bore: approx. 64 mmDimensions large body support y1103/02:Length: approx. 105 mmWidth: approx. 16 mmDistance bore to bore: approx. 88 mmBore diameter: approx. 8 mmContents:2 pieces

€7.90*

y1469 Sheet drill with protective cap, up to 14 mm

The perfect tool for drilling perfectly round holes without cracks into a body shell.The cap protects the extremely sharp and spiky tip, the convenient handle provides secure grip on the tool.Dimensions:For holes up to 14 mm diameterLength of tip: approx. 45 mmTotal length: approx. 132 mmContent:1 Piece

€24.90*

y0833 Lexan Scissors

tool_0018 Version: y0833/01 Straight

Genuine HT spare/option part. Scissors for cutting and detailing of Lexan bodies. Slim design makes preparing small holes easier. Slightly curved blades for smooth radius cutting (wheel housings for example).Contents:1 piece

€19.90*

y1452/02 Body mount conversion kit, FG 1/6 scale 2WD Off-Road models and Smartech Uno/Carson Attack

Genuine HT spare/option part. Conversion kit for FG 1/6 scale 2WD Off-Road models and Smartech Uno/Carson Attack to Mega Beetle.The 8.5 x 1.0 mm female thread perfectly fits the usual stock 8 mm body mounts non-cutting. The thread depth of about 22 mm allows for about 10 - 15 mm of body position adjustment!Content of this set:2 pieces of front body mount (item no. 7154)2 pieces of side body mount (item no. 7154/01)2 pieces of rear roll cage mount (item no. 305001)2 pieces of aluminum body mount extension (item no. y1452)4 pieces of body clip (item no. 6013)4 pieces of M4 x 25 mm worm screw for installation of side and front mounts

€59.90*