Mirror tape, y0026 - 1pce.
€0.50
% Regular price: €1.00 (50% saved)
Available
Product information "Mirror tape, y0026 - 1pce."
Nauenweg 55
47805 Krefeld
Germany
Login
Customers also bought
Genuine Carson spare part for all Carson models. Not for Gas Devil.
Genuine HT spare/option part. Extra wide tire mounted and glued on genuine 1/6 scale FG Stadium Truck rims 6232/01.Diameter 165 mm, width 90 mm. Fits all FG and Carson largescale cars, may fit other cars with 18 mm wheel squares as well.Available in three different compounds:SoftHardWe have tried various rubber / tire compounds for several months on various forms of terrain, etc.. The Mammoth brings, due to its quite strong and large pins and the extreme width of the tire, especially on hard and low grip surfaces a high traction! The Mammoth is available in soft, medium and hard! The rule is: the harder the ground the softer the tire compound. Where other tires spin helplessly the Mammoth provides serious traction. The disadvantage of Mammoth tires: Because of their extreme width they need to be mounted on FG wheels, which is a labor intensive job. From experience, we must strongly recommend against using rims from another manufacturer in combination with extension rings. Due to the before mentioned traction no other rim has been up to the task! Broken rims and torn squares were the result. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.However, the original FG-rim lasts without problems!Unit prices:Mammoth tires extra wide: 47,20 EUR / pairMammoth inserts extra wide: 9,70 EUR/ pairGenuine FG wide track rims 6232/01: 29,90 EUR / pairMounting + glueing rims / inserts / tires: 13,00 EURTotal: 99,80 EUR Contents:2 piecesAlso suitable for:With the following wheel adapter: y1183 Rim adapter
Customers also viewed
Genuine FG spare/option part. Multipurpose threaded rod M4 right-handed thread for the universal application in stabilizers and steering rods.Contents:2 pieces
Fits on all standard width touring car chassis' with 530 mm wheelbase, FG, Carson C5 chassis and most other 1/5 touring cars with the same wheelbase. The body shell is vac-formed from 2 mm Lexan. Replacement parts: 5192 FG Front Porsche 911 GTR3 R clear 5193 FG Rear Wing Porsche 911 GTR3 R clear Required body mounts:Mount front: FG 7020/17 Front bumperRear body mount: FG 7152/01 Rear body mountSide body mount front: FG 7014 Body mountsSide body mount rear: FG 7014 Body mountsDimensions:Length: 940 mmWidth: 415 mmHeight: 230 mmWheelbase: 530 mm
Genuine FG spare/option part. Contents:1 piece
Hazard and Precautionary StatementsHazard Statements (H-Code)H222Extremely flammable aerosol.H229Pressurized container: may burst if heated.H319Causes serious eye irritation.H336May cause drowsiness or dizziness.Precautionary Statements (P-Code)P210Keep away from heat, hot surface, sparks, open flames and other ignition sources. No smoking.P251Do not pierce or burn, even after use.P305P351P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P337P313IF eye irritation persists: Get medical advice/attention.P403P233Store in a well-ventilated place. Keep container tightly closed.P410P412Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.Supplemental hazard information.EUH066Repeated exposure may cause skin dryness or cracking.Farbe:Lexan SprayInhalt:150mlProduct information "RC - Paint Lexan special colors, spraycan (Offer) Buy 3 get 4"For every 3 cans purchased you will get 1 can for free.For example: if you select 4 cans our shop will charge them all when putting in the basket, but deduct one can during the check-out procedure later.RC - Paint is a special paint for lacquering RC-Car Lexan (Polycarbonate) body shells. The ultra-fine mist provides optimal coverage!Through an optimized atomizer valve an outstanding painting result is guaranteed.RC-Paint Lexan color is produced in a particularly environmentally friendly.The composition of colors (color pigments) was placed on the lowest possible heavy metal content and the best possible environmental compatibility of the solvent and propellent gas value.Contents:1 piece / 150 mlThe content of the can is 150ml and suffices - depending on the intensity of the painting, - for one 1/8 or two 1/10 body shells. Two to three cans are needed for a 1/5 or 1/6 body shell.
Genuine FG spare/option part. The body set contents the main part, front body and the rear wing. The body is clear.Required body mounts:Mount front: FG 7020/06 Front bumperRear body mount: FG 7152/01 Rear body mountSide body mount front: FG 3014 Body mountsSide body mount rear: FG 3014 Body mountsDimensions:Length: 870 mmWidth: 392 mmHeight: 260 mmWheelbase: 510 mmContents:1 piecePainting tips:
Genuine HT spare/option part. Decal sheet with logos from several rc-car and supplies manufacturers. All decals are cutted with a plotter. List of manufacturers:rc-car-online.deSmartechLightscaleMecatechHPI-RacingRC-PaintRoadiesFGSpektrumClark´sLosiHorizon HobbySpeed-TecGRPBigscalerGPMPMTZenoahMultiplexLRPChung YangMotulHitecDimensions:220 mm x 330 mmContents:1 piece