y1469 Sheet drill with protective cap, up to 14 mm
€13.45
% €26.90 (50% saved)
Available
Product information "y1469 Sheet drill with protective cap, up to 14 mm"
The cap protects the extremely sharp and spiky tip, the convenient handle provides secure grip on the tool.
Dimensions:
- For holes up to 14 mm diameter
- Length of tip: approx. 45 mm
- Total length: approx. 132 mm
Content:
- 1 Piece
Login
Customers also bought
The Stadium Truck wheels are characterised by excellent grip and cornering stability. This is achieved thanks to a newly developed rubber compound. The tyres are suitable for firm surfaces such as clay and asphalt and can be used for a wide range of applications! The tyres are glued to Stadium chrome rims. The square depth of these Stadium wheels has been increased. This considerably reduces the risk of the rim square turning. An 18 mm rim square driver is required to fit the wheels. Due to the high torque load in relation to the bonding of tyres on large models, an occasional check and possibly a repair of the bonding (y0067) is essential. Durchmesser x Breite / diameter x width 170 x 90 mm Scope of delivery : 1 pair of Stadium Truck tyres S glued on chrome rims with 18mm square 1 pair of Stadium Truck tyres M glued on chrome rims with 18mm square
Item N° 32496 Rear spoiler - 1pce.Fits for Carson Attack series and FG 1/6 scale Marder and other
Genuine Dynamite spare/option part.Key Features:Kills your 2-cycle gas engine on command, loss of radio signal, low battery, or total battery power lossComes ready to install no soldering requiredOptically Coupled to isolate your ignition system from your radio systemBuilt-in LED for easy-to-spot operational status3-Channel Radio System RequiredNot Compatible with AVC-Equipped ReceiversContents:1 piece
Genuine FG spare/option part. This spacer bushing goes into the gear plate between the two clutch bell bearings, preventing them from binding when installing the pinion on the clutch bell.Contents:1 piece
Genuine FG spare/option part. Washers for the screws (M4 / M5) that hold the engine mounts to the chassis. Suitable for all FG models.Dimensions:Outside diameter: 15 mmInside diameter: 6 mmContents:4 pieces
Customers also viewed
Item N° 32496 Rear spoiler - 1pce.Fits for Carson Attack series and FG 1/6 scale Marder and other
Suitable for Alfa Romeo, BMW 320, Audi A4, Peugeot 406 and Honda Accord.
Alloy rear uprights, with replaceable hinge pin bushings.Fits FG and Carson/Smartech Attack, Attack Evo, Gas Blaster, Gas Devil, Super Attack, CRT, CRT 4x4, CPT, Uno, Monster Truck, Pick Up, Beetle and C5.The bearing bushings and bearings should be glued in place, as they have minimal play.One each lefthand and righthand version.Please note: for the installation of all popular disc brakes, we recommend: y6479
The legendary 1:6 FG Marder 2WD off-road buggy with extra-wide Mammoth tyres on chrome rims !For many years the ideal entry into the elite class of radio controlled cars! The large-scale car with tough 26 cc engine is operated with normal 2-stroke gas.A 800 cc tank gives almost an hour of driving fun!For the FG Marder theres a wealth of option parts, most of them are not exactly a must, but make infinitely more fun!The FG Marder is also available with completely installed remote control. Just fuel up, start the engine and drive off.You can select the car with complete RTR-equipment from the options menu.RTR-equipmentRTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed.Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-batteryFeatures:The model is built on an angled 4 mm chassis plate. All screws on the bottom are countersunk with no protruding heads. Double a-arms front and rear axle with 4 high volume oil-filled shock absorbers ensure optimum traction.All rotating parts are supported by ball bearings. Secondary spur gears, bevel gears inside the differential and all drivetrain parts are case-hardened. Rocker panels protect the car against contamination from below. The model is equipped with a powerful 26 cc engine. It needs a regular 2-stroke petrol/oil mix (available at every gas station). The integrated pull starter allows for easy engine starts without additional equipment.The eBay offer does not include RTR equipment!Dimensions:Length: 690 mmWidth: 510 mmHeight: 270 mmWheelbase: 475 mm
The legendary 1/6 FG Marder 2WD Off Road Buggy! For many years the ideal entry into the elite class of radio controlled cars! The large-scale car with tough 26 cc engine is operated with normal 2-stroke gas. A 800 cc tank gives almost an hour of driving fun! For the FG Marder theres a wealth of option parts, most of them are not exactly a must, but make infinitely more fun! The FG Marder is also available with completely installed remote control. Just fuel up, start the engine and drive off.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Features:The model is built on an angled 4 mm chassis plate. All screws on the bottom are countersunk with no protruding heads. Double a-arms front and rear axle with 4 high volume oil-filled shock absorbers ensure optimum traction.All rotating parts are supported by ball bearings. Secondary spur gears, bevel gears inside the differential and all drivetrain parts are case-hardened. Rocker panels protect the car against contamination from below. The model is equipped with a powerful 26 cc engine. It needs a regular 2-stroke petrol/oil mix (available at every gas station). The integrated pull starter allows for easy engine starts without additional equipment.Dimensions: Length: 690 mm Width: 420 mm Height: 270 mm Wheelbase: 475 mm