y0721 Receiver battery, hump pack, NiMh, 4500 mAh
€54.10
Available
Product information "y0721 Receiver battery, hump pack, NiMh, 4500 mAh"
Fits for all HPI 1/5 scale models.
Dimensions: approx. 69 x 51 x 42 mm
| Universal | FG |
 |  |
| BEC | High current |
 |  |
Login
Customers also bought
Sintered steel clutch for Zenoah and many other rc-car engines from 23 cm³ to 32 cm³. incl. clutch spring!Note: The sintered steel clutch needs a break in period of at least half an hour run time after their first installation. Only then the clutch surface reaches the desired grip and provides the necessary friction. After that the clutch will show consistent operation and extremely low wear!With 80 grams the weight of the clutch is about the same as the usual OEM clutches.As with all non-adjustable clutches a periodic monitoring of the clutch spring is recommended. By changing the spring, it is also possible to match your car to the track conditions, i.e.: the harder the spring, the higher the stall speed of the clutch.If not on hand, for installation of the sintered steel clutch a clutch spring, the Zenoah screw set # 7318 and the original Zenoah clutch mount # 7315 are required!
Genuine FG spare/option part. Content:1 piece
Genuine FG spare/option part. Part is delivered in silver or black color from vendor!Content:2 pieces
Genuine HT spare/option part. After-Run is a performance enhancing preservation, which ensures that the engine starts properly, even after a long time (winter break) storage. Added to the fuel it keeps the fuel system clean.Among other After-Run conserves the diaphragm of the Walbro carburetor!For long term storage (i.e. during winter!) "vital" for the carburetor diaphragms!For 23 to 32 cm³ engines like Zenoah, Chung Yang, PT, Losi, HPI a.s.o.It binds water in the fuel, particularly important when the engine is not run regularly or after wet races. After-Run improves engine performance, ensures better combustion, removes debris and residues. Simply add the content of the bottle to 5 litres of fuel.Contents:1 piece / 20 ml
Content: 20 Milliliter (€495.00 / 1000 Milliliter)
Spout, fits the standard gas cans, for a spill-free gas up. For gas cans with the following thread size: diameter 37 mm x pitch 5 mm.Compatible with Marder tanks as well!
Customers also viewed
5 cells, 6 volt, cell size Sub-C.Fits for all HPI 1/5 scale models.Dimensions: approx. 69 x 51 x 42 mmUniversalFGBECHigh current
Rebuild kit for the Zenoah G290 engine to replace piston/cylinder related parts. The kit includes the following parts:Cylinder G290Piston G290Piston ring G290Piston pin G290Piston pin retainer clipsCylinder gasketPlease note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer
High-quality NiMH battery with maxE technology - due to the very low self-discharge, about 80% of the initial capacity is still available after one year.Ideally suited for toys, model making, camera, remote control, flashlight, clock, alarm clock and other technical devices.NiMH rechargeable batteries can basically be used wherever disposable batteries are used.By using NiMH rechargeable batteries, you can reduce costs and help our environment.This battery can last up to 1000 charging cycles. The battery is delivered pre-charged. High cycle stability. high power output fast charging capability increased operating time in electronic devices. long life without memory effect environmentally friendly heavy metal free EAN: 4042883419025 Contents:1 piece
Genuine Ansmann spare/option part. With AMP charging jack. Five cells, 6 volt, cell size Sub-C.Suitable for all HPI 1/5 scale models.Dimensions:69 x 51 x 42 mmContents:1 pieceUniversalBEC