Skip to main content
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

y0460 Ceramic - hybrid bearings kit for 4WD FG models, set

Product information "y0460 Ceramic - hybrid bearings kit for 4WD FG models, set"

Full ceramic bearing rate on the deflection and tension pulley. Extremely robust with ceramic balls. The existing strain in the fully enclosed housing of the belt 4WD FG Sport Line as Competition models are the requirements regarding friction and high heat!


Fits all FG 4WD Sportsline and Competition models.

Contents:
4 pieces, size: 6 x 15 x 5 mm
3 pieces, dimensions: 10 x 19 x 7 mm

Retail prices; 102,30 EUR !!!

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessories / Spare parts

Average rating of 0 out of 5 stars

y0461 Ceramic - Hybrid bearings for FG 4WD front axle housing, 1 pcs.
Single spare parts to replacement number: y0460Ceramic ballbearing fits on the alloy and plastic front axle housing for all FG 4WD models.Dimensions: 6 x 15 x 5 mm

€12.90*

Average rating of 0 out of 5 stars

y0462 Ceramic - Hybrid bearings for FG 4WD tensioning pulley, 1 pcs.
Single spare parts to replacement number: y0460Ceramic ball bearings suitable for the aluminum and plastic shaft bearings of the clamping roller in the back tension roller housing for all 4WD models FGDimensions: 10 x 19 x 7 mm

€16.90*

Average rating of 0 out of 5 stars

6036 FG Ceramic ball bearings, sealed 10x19x7 mm
Genuine FG spare/option part. Why ceramic? Besides corrosion and wear resistance ceramic balls are smoother and have a better shape stability; resulting in less drag from the bearing itself.Are used in all FG and Carson models for bearing the gearshaft.Contents:2 pieces

€20.90*

Average rating of 0 out of 5 stars

66255, FG Ball bearing 6x15x5, 4 pcs.

€13.90*

Similar products

Average rating of 0 out of 5 stars

Ball bearings for FG, sealed, diverse sizes
lager_0003 Size: y19608-rs For clutch bell, 2 pieces+ 4.3EUR
Genuine HT spare/option part. Dimensions:Alloy differentials 15 x 28 x 7 mmPlastic differentials 12 x 28 x 8 mmClutch bell(except standard Formula 1) 10 x 22 x 6 mmLayshaft 10 x 19 x 7 mm Wheel bearing 8 x 22 x 7 mmContents:1 pair / 2 pieces

Variants from €10.70*
€15.00*

Average rating of 0 out of 5 stars

y0781 Dry-Fluid Extreme especially for RC-Cars, 20 ml
Dry lubricant instead of oilWe did not think that today its still possible to make a real improvement in lubricants!DryFluid Extreme is especially designed for remote control model cars, with the aim to maintain the functionality and durability of these little racers as long as possible or to even extend significantly.The effect of the new lubricants for shafts, bearings, guides and ball joints starts where other lubricants reach their limits. Low friction, high lubricity and minimal attractivity to dust or dirt were the main developmental targets. Recent findings in aerospace and automotive technology as well as the experience of RC car drivers are the mentors of innovation of this new lubricant.What is DryFluid Extreme RC-Cars?DryFluid lubricant is more of a solid lubricant than a classic fluid one. DryFluid is not a wax, not oiling, non-greasy and free of silicones. The use of dry particles, polymer lubricants and high-end lubricating fluids results in a previously unknown lubricity without binding dust and dirt. Ease of application and long-term effects of DryFluid Extreme will delight any modeler.DryFluid Extreme product featuresReduces the power losses of shafts, bearings and ball joint systems and guarantees a long life of the treated componentsLowest friction for smooth operation and wear reductionMultistage lubricant system with immediate and long-term lubrication effectsDoes not bind any dust or dirtExtremely good penetrating abilityHighest compatibility with all common materials like metals, plastics and rubberExcellent adhesion and corrosion protection propertiesThe use of DryFluid Extreme RC-CarsThe main effect of DryFluid Extreme is the reduction of friction and wear on shafts, bearings, guides and ball joint systems. The dry components do not bind any dust or dirt and ensure best possible long term lubrication effects.For best results the parts to be treated should be thoroughly cleaned and the fluid applied sparingly. Repeated use increases the long-term effect.Before use, shake bottle vigorously for a short time!Nanotec lubricant for joints, shafts, bearings and gears of rc-cars. Excellent long term lubrication effects. Use included put-on canula for fine dosing. Let dry for several minutes after application and close bottle tightly. Shake well before use Attention:Keep out of reach of children. Do not swallow. Avoid contact with eyes. Keep away from ignition sources. Keep bottle closed tightly.

Content: 20 Milliliter (€845.00* / 1000 Milliliter)

€16.90*

Average rating of 0 out of 5 stars

FG /Carson ball bearing set, shielded, set of 14
lager_0001 Version: y19600 For cars with plastic differential case
Contains all bearings for the specified car.Complete ball bearing set for all FG touring / offroad 2WD cars (not Formula 1) and all Carson 2WD large scale cars (offroad and touring cars).Your choice of plastic or alloy diff case.The set includes:- wheel bearing, 8 pcs., 8x22x7 mm- clutch bell bearing, 2 pcs., 10x22x6 mm- layshaft bearing, 2 pcs., 10x19x7 mm- diff bearing, 2 pcs., 12x28x8 mm for plastic diff case or 15x28x7 mm for aluminum diff case.

€26.20*

Average rating of 0 out of 5 stars

10411 FG Ball bearing set for F1
fg_10411 Version: 10411CO Competition sealed+ 5EUR
Genuine FG spare/option part. Suitable for Formula 1. The set contains all ball bearing which are necessary for one model.Contents:10411SL Sportsline:10411CO Competition:2x 8x16x6 mm4x 10x19x7 mm8x 8x22x72x 12x28x8 mm3x 8x16x5 mm4x 10x19x7 mm8x 8x22x7 mm2x 15x28x7 mm

Variants from €43.90*
€48.90*

Average rating of 0 out of 5 stars

y19018 FG/Carson/Smartech 2WD ball bearing set, sealed, set
lager_0002 Car: y19600-RS Version for plastic diff excepting F1
Contains all bearings for the specified FG-car.Complete ball bearing set for all FG touring and offroad 2WD cars (your choice of plastic or alloy diff case). Not suitable for WB535 Modelle.The set includes:wheel bearing, 8 pcs., 8x22x7 mmclutch bell bearing, 2 pcs., 10x22x6 mmlayshaft bearing, 2 pcs., 10x19x7 mmdiff bearing, 2 pcs., 12x28x8 mm for plastic diff case or 15x28x7 mm for aluminum diff case.

€69.90*

Average rating of 0 out of 5 stars

y0098 Ceramic ball bearings, sealed, set
y0098 Set content: y0098/1 - set of 6
Why ceramic? Besides corrosion and wear resistance ceramic balls are smoother and have a better shape stability; resulting in less drag from the bearing itself.Available sets: Set consists 6 bearings, includes bearings for FG clutch bell, layshaft and differential (alloy case only!).Set includes:2 pcs. 10x22x6 mm2 pcs. 10x19x7 mm2 pcs. 15x28x7 mmSet consists 14 bearings, includes all bearings from a standard FG-car (not Formula 1) with alloy differential.Set includes:8 pcs. 8x22x7 mm2 pcs. 10x22x6 mm2 pcs. 10x19x7 mm2 pcs. 15x28x7 mm

€92.30*

Average rating of 0 out of 5 stars

4411/06 FG bearing set with grease filling EVo/Competition
Genuine FG spare/option part. FG ball bearing with heat resistant grease filling up to 180°. Therefore essentially improved durability of the wheel bearings and the clutch bell.For all FG cars with alloy differential case except 4WD and Formula 1.Contents:Eight pieces: 8 x 22 x 7 mmTwo pieces: 10 x 22 x 6 mmTwo pieces: 10 x 19 x 7 mmTwo pieces 15 x 28 x 7 mm

€39.50*

Average rating of 0 out of 5 stars

4411/12 FG ball bearing set for Leopard 4 Competition, sealed, 23 pcs.
Genuine FG spare/option part.Fits too WB535 cars.Content:4 pieces: 6 x 15 x 5 mm5 pieces: 10 x 19 x 7 mm2 pieces: 10 x 22 x 6 mm6 pieces: 8 x 22 x 7 mm2 pieces: 17 x 26 x 7 mm4 pieces: 15 x 28 x 7 mm

€86.90*

Average rating of 0 out of 5 stars

y0781/01 Dry-Fluid "Gear Lube" for gears, 10/20 ml
y0781_01 Size: y0781/20 - 20 ml+ 8.1EUR
Dry lubricant instead of oil DryFluid Extreme Gear Lube is specifically designed for highly loaded gears in models. It is characterized by extreme pressure resistance and excellent adhesion. Through the use of solid lubricant components, it shows only a slight tendency for dust and dirt retention. Main applications of the newly developed Gear Lube Gear are of model helicopters, rc-cars and trucks, model trains and servos. Also ideally suited for shafts and gimbals of any kind.DryFluid lubricant is more of a solid lubricant than a classic fluid one. DryFluid is not a wax, not oiling, non-greasy and free of silicones. The use of dry particles, polymer lubricants and high-end lubricating fluids results in a previously unknown lubricity without binding dust and dirt. Especially the long-term effects of DryFluid Extreme will delight any modeler. Product characteristics at a glance: Exciting lubricating propertiesReduces power losses caused by friction Reduces operating noise Reduces wear Extremely pressure resistant Long-term stability Highest adhesion High material compatibility with metals, plastics and rubber materials Low tendency for dust and dirt binding Application Notes: A thin layer of the Gear Lube is enough for an extreme lubricating effect. If possible, apply to an upright standing gear and rotate it during the application. For hard to reach places and selective applications use the included canula. For fine and uniform distribution use a fine hair brush immediately after the application of Gear Lube. Transmissions that have not been treated with Gear Lube before should be thoroughly cleaned first. Shake well before using and apply sparingly!High End dry lubricant for highly loaded gears in models. Especially for transmissions of model helicopters, rc-cars, trucks, model trains and servos. Can also be used for shafts and gimbals of any kind Through the use of dry particles, lubricating polymers and high-end lubricating fluids an unprecedented lubricating effect is achieved. Extremely pressure-resistant and with excellent adhesion. Very low tendency for dust and dirt retention. Multistage dry lubricant system with long-term effects.

Content: 10 Milliliter (€2,500.00* / 1000 Milliliter)

Variants from €16.90*
€25.00*

Average rating of 0 out of 5 stars

y0462 Ceramic - Hybrid bearings for FG 4WD tensioning pulley, 1 pcs.
Single spare parts to replacement number: y0460Ceramic ball bearings suitable for the aluminum and plastic shaft bearings of the clamping roller in the back tension roller housing for all 4WD models FGDimensions: 10 x 19 x 7 mm

€16.90*

Average rating of 0 out of 5 stars

y4494/03 Sealed bearing f. ball raced servo saver
Seal bearings are robust and keep the dirt from the camps better out than ordinary bearings. This is suitable for the upper part of the servo savers. Bulk: 7 x 14 x 5 mm

€14.90*

Average rating of 0 out of 5 stars

y0463 Seal bearing set for the FG 4WD competition models
Genuine HT spare/option part. Complete seal bearing rate with 24 bearings for the FG Competition 4WD models. Quantity / Size / use:4 pieces 6 x 15 x 5 mm - Front Pulley2 pieces 10 x 22 x 6 mm - Clutch Bell6 pieces 10 x 19 x 7 mm - layshaft / belt tensioner4 pieces 15 x 28 x 7 mm - Differentialv6 pieces 8 x 22 x 7 mm - wheel bearings2 pieces 17 x 26 x 7 mm - the inside front wheel bearingsTotal value of stock: 116,25 EUR

€79.90*

Customers also viewed

%

Average rating of 0 out of 5 stars

y1129 Mecatech hydraulic brake Expert for FG, Carson and many more, incl. brake bleeding set
Genuine Mecatech spare/option part. Full-metal hydraulic brake (like the former hydraulic FG brake).The set consists of two complete brake calipers for right and left, and 2 brake units, hydraulic oil and all, necessary for installation, accessories (see also our pictures)One version fits front and rearFits onroad / offroad / monster and stadium cars from FG and othersNo need for alloy uprights!Fits Formular 1 models, Competition, Sportsline and E (in connection with alloy front uprights y0932Dimensions master brake cylinder:Height: 75 mmWidth: 48 mmDepth: 13 mmContents:1 set

From €249.90* €269.90* (7.41% saved)

Average rating of 0 out of 5 stars

60230 FG Front bumper Off-Road Buggy
Genuine FG spare/option part. Spare part for FG Off-Road Buggy for 2WD and 4 WD.Length 60 mmWidth 155 mmHeight 85 mmContents:1 piece

€21.90*

Average rating of 0 out of 5 stars

y0461 Ceramic - Hybrid bearings for FG 4WD front axle housing, 1 pcs.
Single spare parts to replacement number: y0460Ceramic ballbearing fits on the alloy and plastic front axle housing for all FG 4WD models.Dimensions: 6 x 15 x 5 mm

€12.90*

Average rating of 0 out of 5 stars

y0781 Dry-Fluid Extreme especially for RC-Cars, 20 ml
Dry lubricant instead of oilWe did not think that today its still possible to make a real improvement in lubricants!DryFluid Extreme is especially designed for remote control model cars, with the aim to maintain the functionality and durability of these little racers as long as possible or to even extend significantly.The effect of the new lubricants for shafts, bearings, guides and ball joints starts where other lubricants reach their limits. Low friction, high lubricity and minimal attractivity to dust or dirt were the main developmental targets. Recent findings in aerospace and automotive technology as well as the experience of RC car drivers are the mentors of innovation of this new lubricant.What is DryFluid Extreme RC-Cars?DryFluid lubricant is more of a solid lubricant than a classic fluid one. DryFluid is not a wax, not oiling, non-greasy and free of silicones. The use of dry particles, polymer lubricants and high-end lubricating fluids results in a previously unknown lubricity without binding dust and dirt. Ease of application and long-term effects of DryFluid Extreme will delight any modeler.DryFluid Extreme product featuresReduces the power losses of shafts, bearings and ball joint systems and guarantees a long life of the treated componentsLowest friction for smooth operation and wear reductionMultistage lubricant system with immediate and long-term lubrication effectsDoes not bind any dust or dirtExtremely good penetrating abilityHighest compatibility with all common materials like metals, plastics and rubberExcellent adhesion and corrosion protection propertiesThe use of DryFluid Extreme RC-CarsThe main effect of DryFluid Extreme is the reduction of friction and wear on shafts, bearings, guides and ball joint systems. The dry components do not bind any dust or dirt and ensure best possible long term lubrication effects.For best results the parts to be treated should be thoroughly cleaned and the fluid applied sparingly. Repeated use increases the long-term effect.Before use, shake bottle vigorously for a short time!Nanotec lubricant for joints, shafts, bearings and gears of rc-cars. Excellent long term lubrication effects. Use included put-on canula for fine dosing. Let dry for several minutes after application and close bottle tightly. Shake well before use Attention:Keep out of reach of children. Do not swallow. Avoid contact with eyes. Keep away from ignition sources. Keep bottle closed tightly.

Content: 20 Milliliter (€845.00* / 1000 Milliliter)

€16.90*

Average rating of 0 out of 5 stars

6118/06 FG RC-plate 1:6 f.hydr. brake
Genuine FG spare/option part. For use with hydraulic brakes.Contents:1 piece

€15.90*

Average rating of 0 out of 5 stars

FG Sportsline Truck 4WD with FG Super Race Truck body shell clear
After the successful introduction of the 4WD Sportsline chassis for 1:5 FG Touring and Sports cars this chassis is now available also for Race Trucks. Mainly rookies benefit from the advantages of an all-wheel drive. Traction also on dusty asphalt, therefore no pulling of the rear section, all around just pure driving fun. These are just some advantages of the four-wheel drive.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The body shell is clear.The Race Truck chassis is equipped with a double wishbone suspension, toe-in, camber and castor can be adjusted. The robust all-wheel drive gives the vehicle a neutral driving performance on almost every surface. We set big value on durability using strong materials as well as operator convenience. The FG Sportsline class is the affordable, but still high-quality entry into the RC car sport.Technical description:Equipped with a powerful 26 cm³ engine, Tuning pipe, tank with snap closure, 2 differential gears, front disk brake and a lot more. Highlight however remains the approved FG all-wheel drive. Maximal traction as well as simple handling, grip in curves - these are the advantages only a four-wheel drive can offer. With a wheelbase from 530 mm.Dimensions:Length: 880 mmWidth: 435 mmHeight: 380 mmWheelbase: 530 mm Trucks in action!

€1,249.95*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Plugin Development