For all tire adhesives above,15 ml pump spray bottleAccelerator-spray is the second component to cure superglue immediately.Advantages: Tangible adhesion after a few seconds Aromatic solvents and hexane free Suitable for hobby, craft, industry and household.Processing:Clean the surface thoroughly. Apply accelerator at room temperature on both surfaces to be bonded until a clear liquid film appears. Air out the applied accelerator, then apply the superglue as usual.
Genuine HT spare/option part. One each r/h and l/h adapter plate for installation of Mecatech twin-piston brake calipers on FG 2020 car uprights/spindles.Fits front and rear!Contents:1 x r/h adapter plate1 x l/h adapter plate4 x csh screw M3 x 10 mm
Mounted and glued on reinforced disc rims (with inserts).Diameter 170 mm x width 80 mm, similar to FG Off-Road Buggy rear tires. Multipin tread for excellent grip.18 mm wheel square (with reinforcement ring) fits all FG and Carson / Smartech largescale cars. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.
Exhaust port and carburetor intake cover plates, made of 1 mm aluminum, fits most current 23cc - 30cc rc-car engines.Exhaust port cover:Total: approx. 20 x 45 mmMounting holes (ctr./ctr.): approx. 34 mm carb intake cover:Total: ellipse approx. 28 x 40 mmMounting holes (ctr./ctr.): approx. 31 mm
y1415 Version:
y1415/03 One pair each for approx. 60 and 80 mm wide tires with 18 mm Square
New highly reinforced MadMax rim with 18 mm square drive and optimized beadlock rings.20-fold screwed very tough and suitable for all 1/6 &1/5 FG, Smartech and many more.The MadMax Extreme rims are available for either 60 or 80 mm tire width.They come with optimized inner and outer beadlock rings, 40 pieces of 2.5 mm allen head screws (for 2 mm allen wrench) and reinforcement rings around the wheel hex.Our shop offers you the choice of economically priced sets of the following combinations:y1415/01 one pair for approx. 60 mm wide tiresy1415/02 one pair for approx. 80 mm wide tiresy1415/03 one pair each for approx. 60 and 80 mm wide tires
Universal Foam Cleaner div>Multi Clean is a highly effective foam cleaner for countless types of dirt on almost all surfaces that can be easily applied to horizontal as well as vertical surfaces due to a stable active foam while intensively affecting the contaminants.Multi Clean is therefore ideal for cleaning your RC cars. Through the foam shape, Multi Clean, including the ideal product, is to liberate zbdachhimetal cladding of nicotine approaches or stains as a result of assembly work.Also on transparent plastic parts, Multi Clean achieves a perfect cleaning effect in combination with Power Clean [Link] Inno_040169: Power Clean [Endrink] without damaging damage occurring when using scrubbing agents. Multi Clean is a universal cleaner because it does not attack glass or paint or plastic. In addition, the product is free of silicone, which would make any further treatment with wax or the like. Due to foaming, Multi Clean is highly productive and last but not least through the pleasant smell. In the spray box and foaming, Multi Clean is especially user-friendly and application practical. Even wipeing will be for pleasure because the product does not leave a strip. This makes it difficult to treat hard-to-reach sites. Highlights span> Easy application span> versatile span> stable foaming, thus longer exposure period span> cleans to deep into the fibers span> harmless for plastic, rubber, fabric, leather, glass, pmma, aluminum, varnish etc div> span> leaves no stripes span> spread a pleasant fresh smell CONTENTS Base: Mixture of surfactants, glycol ethers and paraffin oils in water Density: 975 kg / m³ Consistency: White foam solvent: glycol ether and water Flash point: 0 ° C foam stability: very good Processing conditions: + 5 ° C to + 30 ° C Underground: The most common surfaces, such as fabric covers, aluminum, leather, wood, paints andVarious plastics nobr> USESpray can shake well before use. Spray Multi Clean on the surface to be treated and have a brief. Then wipe the surface with a clean, dry cloth (Innotec Multi Wipe or Inno-Cleaner). For coarser surfaces Multi Clean possibly rubbing after spraying with a soft brush and then rub dry with a clean, dry cloth. With bonded panels, it is advisable not to spray the product in a large amount directly on the surface, but to apply and retract with a clean cloth. If necessary, test in advance at an unobtrusive place.Hands-Cleaning: with Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and Water Shelf life: 2 years in unopened original packaging Storage conditions: Cooling and dry Store Batchcod Type: F