22 products found for "y0465"

Catalogue #1

y0465 Ball bearings sealed for Gilmer belt pulley 4WD, 6x15x5 mm, 2 pcs.

Ball bearings sealed for Gilmer belt pulley 4WD for FG models. Fits for FG no. 66255Bulk: 6 x 15 x 5 mm

€5.70*

10465 FG Alloy ball-and-socket joint F1 - 40pcs.

Alloy ball-and-socket joint with surface coating, 70% less weight, easy-running and resistant to wear.

€45.90*

y0463 Seal bearing set for the FG 4WD competition models

Genuine HT spare/option part. Complete seal bearing rate with 24 bearings for the FG Competition 4WD models. Quantity / Size / use:4 pieces 6 x 15 x 5 mm - Front Pulley2 pieces 10 x 22 x 6 mm - Clutch Bell6 pieces 10 x 19 x 7 mm - layshaft / belt tensioner4 pieces 15 x 28 x 7 mm - Differentialv6 pieces 8 x 22 x 7 mm - wheel bearings2 pieces 17 x 26 x 7 mm - the inside front wheel bearingsTotal value of stock: 116,25 EUR

€79.90*

y0469 Special stuffed stroker crankshaft for 30.5 cm³

Genuine HT spare/option part. Stuffed stroker crankshaft. Spare part for the 30.5 cc big bore kit y0466.Contents:1 piece

€89.90*

y0460 Ceramic - hybrid bearings kit for 4WD FG models, set

Full ceramic bearing rate on the deflection and tension pulley. Extremely robust with ceramic balls. The existing strain in the fully enclosed housing of the belt 4WD FG Sport Line as Competition models are the requirements regarding friction and high heat! Fits all FG 4WD Sportsline and Competition models.Contents: 4 pieces, size: 6 x 15 x 5 mm 3 pieces, dimensions: 10 x 19 x 7 mmRetail prices; 102,30 EUR !!!

€49.90*

y0462 Ceramic - Hybrid bearings for FG 4WD tensioning pulley, 1 pcs.

Single spare parts to replacement number: y0460Ceramic ball bearings suitable for the aluminum and plastic shaft bearings of the clamping roller in the back tension roller housing for all 4WD models FGDimensions: 10 x 19 x 7 mm

€16.90*

y0463/02 Complete set of 28 sealed bearings for Losi 5ive-T 2.0

28-piece set of sealed 2RS ball bearings for Losi 5ive-T 2.0. Set includes:4 pieces 6x10x3 mm (LOSA6946)4 pieces 10 x 15 x 4 mm (LOSB5970)4 pieces 9 x 20 x 6 mm (LOSB5974)4 pieces 12 x 24 x 6 mm (LOSB5972)6 pieces 15 x 24 x 5 mm (LOSB5973)2 pieces 15 x 28 x 7 mm (LOSB5975)4 pieces 20 x 32 x 7 mm (LOSB5971) Total of Losi prices for this 28-piece sealed bearings set when bought separately: 171.79 EUR

€79.90*

y0464 Seal bearing set for the FG 4WD sportsline models, set

Complete seal bearing rate with 24 bearings for the FG Competition 4WD models. Quantity / Size / use4 pieces 6 x 15 x 5 mm - Front Pulley2 pieces 10 x 22 x 6 mm - Clutch Bell5 pieces 10 x 19 x 7 mm - layshaft / belt tensioner4 pieces 12 x 28 x 8 mm - Differential6 pieces 8 x 22 x 7 mm - wheel bearings2 pieces 17 x 26 x 7 mm - the inside front wheel bearingsTotal value of stock: 110,30 EUR

€74.90*

y0415 Receiver battery charging cable

akku_0018 Version: y0415/04 BEC-connectr+ 2.4EUR

Genuine HT spare/option part.Charging cable for receiver batteries.Content:1 piece

€11.60*

y0461 Ceramic - Hybrid bearings for FG 4WD front axle housing, 1 pcs.

Single spare parts to replacement number: y0460Ceramic ballbearing fits on the alloy and plastic front axle housing for all FG 4WD models.Dimensions: 6 x 15 x 5 mm

€12.90*

y0463/01 Complete set of sealed bearings for Losi 5ive-T and Mini WRC, 24 pcs.

24-piece set of sealed 2RS ball bearings for Losi 5ive-T and Mini WRC. Set includes:4 pieces 10 x 15 x 4 mm (LOSB5970)4 pieces 9 x 20 x 6 mm (LOSB5974)4 pieces 12 x 24 x 6 mm (LOSB5972)6 pieces 15 x 24 x 5 mm (LOSB5973)2 pieces 15 x 28 x 7 mm (LOSB5975)4 pieces 20 x 32 x 7 mm (LOSB5971) Total of Losi prices for this 24-piece sealed bearings set when bought separately: 156.89 EUR

€69.90*

y0425/03 Parallel Y-harness

Genuine rc-car-online spare/option part. Optional equipment part for Axial Jeep Wrangler 4WD 1/6.Features:14 AWG to 10 AWGEC5 connectorsContent:1 piece

€19.80*

y0425/02 Y-harness current, universal connector

Genuine rc-car-online spare/option part. Total length:approx. 200 mmContents:1 piece

€14.90*

This product is currently not available.

y1465 Beadlock screws hexalobular drive (Torx) T10

y1465 Version: screws only

Genuine HT spare/option part. Hardened special screws for mounting the beadlock rings of MadMax and Losi DBXL rims.For HPI rims due to the screw head diameter only to be used in combination with non-HPI beadlock rings (i.e. MadMax or Losi 5ive-T)!The combination of larger diameter and substantially larger thread depth ensures a secure grip of the screws in the plastic of the rims; the coarse thread also allows for quick assembly.The large head with T10 hexalobular drive distributes the load as wide as possible on the ring.The screws are galvanized for rust protection.Please note: it is not recommended to use the screws in rims which had previously M3 screws installed. With new rims or in exchange for M2.5 screws appropriate strength is ensured.Dimensions: Diameter: 3,1 mmLength: 12 mmHexalobular drive: T10 (Torx) Content:1 Set of 40 screws for one pair of rims.

€6.90*

y0565 RC-Tech Flexa Fix body shell glue

Genuine HT spare/option part. For all epoxy models, plastic and polycarbonate/lexan body repairs!Direction of use:Use a brush or other applicator. Apply enough Flexa Fix to the damaged area. Be careful not to apply too much in one go as it can be difficult to manipulate. If necessary apply two or three coats to build up the joint area. Use epoxy blanket of pieces of polycarbonate (Lexan) to re-enforce if necessary.You can also use the Flexa Fix to re-enforce the body corners (let the pure product leak into the corners) or to make flexible battery packs.Contents:1 piece / 100 ml

Content: 100 Milliliter (€109.00* / 1000 Milliliter)

€10.90*

This product is currently not available.

y0425/01 Y-harness, silicone insulated, universal/JR

Genuine HT spare/option part. The Y-harness is required for running two servos on a single receiver channel. Top quality heavy gauge 0.5 mm² cable with silicone insulation, 150 mm long, suitable for all rc-systems.Content:1 piece

€12.90*

y0495 FG manuals set Competition EVO 08 German / English, 1 pce.

y0495 Language: German

Genuine FG manuals as included with the cars.All wheelbases, including Race Truck.

€3.90*

y0455 HT Cask shaped springs for Mecatech Klick-Shocks, black 3,0 mm

These cask shaped springs are especially designed to fit the diameters of Mecatech Klick-Shocks and Mecatech Big Bore shocks.Dimensions:Inner diameter, upper: 20,5 mmInner diameter, lower: 16,5 mmOutside diameter: 29,5 mmLength: 52,5 mmWire diameter: 3,0 mm

€17.90*

y0456 Mammoth Off-Road tires extra wide, on original FG stadium rim

y0456 Rubber compound: y0456/02 hard

Genuine HT spare/option part. Extra wide tire mounted and glued on genuine 1/6 scale FG Stadium Truck rims 6232/01.Diameter 165 mm, width 90 mm. Fits all FG and Carson largescale cars, may fit other cars with 18 mm wheel squares as well.Available in three different compounds:SoftMediumHardWe have tried various rubber / tire compounds for several months on various forms of terrain, etc.. The Mammoth brings, due to its quite strong and large pins and the extreme width of the tire, especially on hard and low grip surfaces a high traction! The Mammoth is available in soft, medium and hard! The rule is: the harder the ground the softer the tire compound. Where other tires spin helplessly the Mammoth provides serious traction. The disadvantage of Mammoth tires: Because of their extreme width they need to be mounted on FG wheels, which is a labor intensive job. From experience, we must strongly recommend against using rims from another manufacturer in combination with extension rings. Due to the before mentioned traction no other rim has been up to the task! Broken rims and torn squares were the result. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.However, the original FG-rim lasts without problems!Unit prices:Mammoth tires extra wide: 47,20 EUR / pairMammoth inserts extra wide: 9,70 EUR/ pairGenuine FG wide track rims 6232/01: 29,90 EUR / pairMounting + glueing rims / inserts / tires: 13,00 EURTotal: 99,80 EUR Contents:2 piecesAlso suitable for:With the following wheel adapter: y1183 Rim adapter

€89.90*

y0495/02 FG manuals set Competition EVO 04 German, 1 pce.

Item N° y0495/02 FG manuals set Competition EVO 04 German, 1 pce.Genuine FG manuals as included with the cars.All wheelbases, including Race Truck.

€3.90*

y0645 Radio plate mounting posts, aluminum, 38, 47 or 57 mm long

y0645 Length: y0645/03 - 57 mm

Genuine HT spare/option part. Round aluminum radio plate posts, diameter 8 mm, threaded for M4 mounting bolts. Your choice of 38 mm (firs rc-plate from Evo 04 and Evo 08), 47 mm or 57 mm length.The thread bore of the 30 mm version is countersunk on one end.Contents:2 pieces

€9.90*

y0495/01 FG manuals set Competition EVO 07 German, 1 pce.

Item N° y0495/01 FG manuals set Competition EVO 07 German, 1 pce.Genuine FG manuals as included with the cars.All wheelbases, including Race Truck.

€3.90*