To ensure the required cooling for current 1/5 and 1/6 engines the flywheels have fins on both sides. Therefore the fan housing has large openings on the crankcase side for the required air supply. However, the risk of foreign objects (grass, sand, or even stones!) entering here Is very high! As a result, broken fins on the flywheel occur frequently. This leads to reduced cooling efficiency and - even more critical vibrations from a flywheel which is out of balance due to missing fins. Therefore, this kind of flywheel protection is highly recommended, especially for offroad use. The product video explains the handling in detail! Note:It is essential to thoroughly clean and degrease the crankcase prior to attaching the hook-and-loop tape (OKS2661)!For installation on Chung-Yang and Zenoah engines in FG cars, the crankcase cover must be slightly modified in two places where the engine mount is attached (see Figure 6 and 7). Furthermore the fit of the fabric must be as tight as possible in the region of the layshaft pinion (in front of the differential ring gear!) (see Figure 8).Set includes:Special tailored fabric with sewed on hook-and-loop tapehook-and-loop tape for installation to the crankcaseAdhesive for securing the hook-and-loop tape
hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.Length: 1 meterDimensions:Inner diameter: 2 mmOuter diameter: 4 mm
luftf_0022 Content of delivery:
y0049/01 - Filter only
K&N's Universal Air Filters are designed and manufactured for a wide variety of applications including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and other applications. Regardless of the angle or offset diameter of the air intake, there is probably a K&N Universal air filter for your equipment.All filters are constructed with ultra-strong molded pliable rubber flanges which absorb vibration and allow for secure attachment and can also be stretched for up to 1/16" (1.5mm) to fit in-between sizes. K&N universal air filters are washable and reusable. Measures filter:Flange, inside diameter: 1 in (25 mm)Outside diameter: 2 in (51 mm)Height: 1.5 in (38 mm)Flange, length: 0.625 in (16 mm)To complete, we recommend: 6451/03 Air filter adapter.Select from: Filter onlyFilter with aluminum adapterAdapter onlyWhen using a K&N Filters should observe the foam precleaner y19017 be used with wet-foam air filter oil.To complete coverage of the K&N filter Combat is respected, because the K&N filter without prefilter-oiled foam is to permeable to the off-road use.
Fast and thorough cleaning action, acetone-free!Removes lining abrasion, grease, oil, brake fluid, dirt and more. Cleans metal, glass, ceramics a.s.o.. Prevents dispersal of harmful abrasive dust. Spray parts until dirt and grease are washed away or wipe with a clean cloth.Also for degreasing gluing spots ...Content: 600 ml spray can.
The secure hose connection for engine or tank removal! Advantages of the Kent system quick couplings: A safe opening and closing with one hand, as soon as one side is fixed. The design of the "shut-off" valve is a double chamber system, which closes when disconnecting the coupling. (This design enables easy and safe opening of the quick couplings, even under high pressure. Similarly, just as in low pressure applications.) You feel a snap when connecting the couplings, preventing over-tightening or accidental opening. The actions of opening and closing the quick couplings are identical, so that the handling is extremely simple. An ergonomic design guarantees easy handling, yet the space requirement for the couplings is low. Long and safe life of the couplings even with frequent connection and disconnection. In order to protect the fully encapsulated KENT quick coupling system against dirt even after dismantling, sealing the ends with the corresponding white plugs and caps is recommended.
zahn_0011 Version:
y0048/03 - 60 mm Ø large (46 T / 48 T)+ 2.8EUR
Alloy ring gear adaptor for FG, Smartech, Carson and many other cars. Contrary to the stock plastic adaptor the aluminum version is secured by set screws.There are three sizes available:y0048/01 - 47 mm outer diameter, fits 38 tooth ring gearsy0048/02 - 52 mm outer diameter, fits 39/40/41/42/43/44 tooth ring gears - Weight: 29 grammsy0048/03 - 60 mm outer diameter, fits 46T and 48T ring gears - Weight: 31 gramms
Genuine HT spare/option part.Aluminum spring perches for Losi 5ive-T/B and Mini shocks; with slot for fast and easy change of shock springs. Direct replacement for the stock plastic part.Contents:2 pieces
Genuine rc-car-online spare/option part. Rugged, universal jacket with many features.BreathableWindproofWaterproofSealed seams Concealed hood in collarRemoveable synthetic fur collar liningRemoveable sleeves Removeable synthetic fur inner liningPocket with zipper and pen holder on the sleeveTwo large chest pockets with zipperMobile phone pocket with cover and hook-and-loop closureTwo large pockets Inside pocket Material: 100% polyester, lining: 70% polyacryl, 30% polyester Contents:1 piece
Part No.: y0054 Aluminum struts for roll bars and miscellaneous applications, 1 pce.Available in several sizes.Aluminum tube struts for construction of roll bars, battery holders and other useful things.The struts have various bores with 2 mm diameter. Similar to picture.Item N°Internal dimension:External dimensions:Länge:y0054/018,2 mm10 mm150 mmy0054/028,2 mm10 mm180 mmy0054/038,2 mm10 mm190 mmy0054/048,2 mm9,6 mm225 mmy0054/058,2 mm10 mm190 mmy0054/068,2 mm10 mm200 mmy0054/078,2 mm10 mm170 mmy0054/088,2 mm10 mm215 mmy0054/098,2 mm10 mm300 mm
Fits chassis with 535 mm wheelbase, current touring car width. EFRA and DMC homologated. Body set includes front part and main part. A rear wing is available through the shop's options menu. The body shell is vac-formed from 2 mm Lexan.Efra # 5052/06Required body mounts:Mount front: FG 7152/01 Rear body mount Rear body mount: Side body mount front: Side body mount rear: Measures:Length: 885 mmWidth: 392 mmHeigth: 260 mmWheelbase: 530 mmPainting tips:
Genuine HT spare/option part. Round aluminum radio plate posts, diameter 8 mm, threaded for M4 mounting bolts. Your choice of 38 mm (firs rc-plate from Evo 04 and Evo 08), 47 mm or 57 mm length.The thread bore of the 30 mm version is countersunk on one end.Contents:2 pieces
CNC machined alloy engine mount, direkt replacement for the stock plastic part, heat and tweak resistant.They come with all necessary hardware included.
€39.90*
This website uses cookies to ensure the best experience possible. More information...