Genuine MD spare/option part. The red version with a temperature resistant up to 300°C. Directions for use:Clean the surfaces with a cleaner. Apply MD-Sil on one side and press the parts together. Touch-dry in 10 - 20 minutes. Curing speed 3 mm/24 hours. Contents:1 piece / 80 ml
Bindulin liquid rubber - very high elasticitySuitable for additional sealing of tuned pipes and exhaust / manifold connections .Temperature resistant from -60 ° to + 180 ° CResistant against diluted acids.Also for sealing threaded joints, electric lines and cable lead-throughs in receiver boxes.The surfaces must be clean, grease free and dry (brake cleaner).Contents:1 piece / 45 grams
For all tire adhesives above,15 ml pump spray bottleAccelerator-spray is the second component to cure superglue immediately.Advantages: Tangible adhesion after a few seconds Aromatic solvents and hexane free Suitable for hobby, craft, industry and household.Processing:Clean the surface thoroughly. Apply accelerator at room temperature on both surfaces to be bonded until a clear liquid film appears. Air out the applied accelerator, then apply the superglue as usual.
grp_w71_ungeklebt Rubber compund:
Extra Soft - GW71X
Item N° GW71 GRP 1:6 Buggy "BULDOG" Reifen ungeklebt, 2 St.Tires will be delivery with inlays and without rims. - Medium aggressive knobby tread - Good directional stability - Good lateral traction - Good propulsion - For solid surfacesTires are not glued!Tire diameter: 164 mmTire width: 61 mm
Outer diameter 176 mmWidth 83 mmFits 130 x 62 rims with additional extension ring only!Hurrax tires/rims can be installed on FG cars by using adapter # .
Outer diameter 176 mmWidth 83 mmFits 130 x 62 rims with additional extension ring only!Hurrax tires/rims can be installed on FG cars by using adapter # .
The SCX24 1940s Dodge Power Wagon delivers strong trail performance at a great value. It has the looks of the full-size classic and brings new features to the SCX24 platform, including smooth oil-filled shocks and high-performance Pro-Line wheels and tires. Key Features Detailed Power Wagon 4-door molded ABS hard body Oil-filled shocks Pro-Line Interco Super Swamper tires Pro-Line Impulse Bead-Loc wheels Overlanding rack and accessories Needed to Complete Nothing! Everything you need to begin having fun with the SCX24 Dodge Power Wagon is included! Features Fully equipped and ready-to-run Assembled SCX24 chassis, drivetrain, and suspension Detailed Power Wagon 4-door molded ABS hard body Pro-Line Interco Super Swamper tires Pro-Line Impulse Bead-Loc wheels Oil-filled shocks Overlanding rack and accessories Spektrum SLT2 2.4GHz radio system 88-Turn brushed motor Spektrum 350mAh LiPo battery and USB charger Overview The innovative Dodge Power Wagon played a pivotal role in building America. Mass-produced rear wheel drive vehicles before WWII were less than ideal for demanding farm and construction work. During the war, battlefield soldiers used the 4x4 Power Wagon to move supplies and wounded troops. They discovered how valuable these trucks were and created demand that Dodge began meeting with civilian models in the mid-1940s. The Axial SCX24 1940s Dodge Power Wagon offers a unique take on this off-road classic, as a custom 4-door RC crawler built on the proven, go-anywhere SCX24 platform. It's an essential addition to any Axial fan's collection of SCX24 rigs, and the perfect choice for everyone who wants performance and value in an RC crawler. If you're a full-size classic auto enthusiast who's new to RC, you too will be thrilled by this rig's 1/24 scale accuracy and ready-to-run simplicity. Fully assembled and fully equipped, the Power Wagon tops off its muscular chassis with a molded ABS hard body in a custom 4-door design that's loaded with detail. An overlanding rack and accessories, included for optional installation, add to the realism. It looks ready to take on the wilderness and it is! The SCX24 Power Wagon has been engineered for unstoppable RC crawling whether indoors at home or outdoors on the trails. Axial improved the already proven SCX24 platform with several significant performance upgrades. Oil-filled shocks create a suspension system that smoothly absorbs bumps and remains stable over the roughest terrain. Pro-Line Interco Super Swamper tires on Pro-Line Impulse Bead-Loc wheels add the grip and clearance to conquer any challenge in your chosen line. Everything you'll need is included in the box a Spektrum SLT2 2.4GHz radio, Spektrum 350mAh 2S 30C 7.4V LiPo battery, handy Spektrum USB LiPo charger, and even four AA batteries for the transmitter. The value and performance make the SCX24 1940s Dodge Power Wagon an ideal RC rock crawler for anyone who's eager to hit the trails with a classic American truck. OFFICIALLY LICENSED 1940s DODGE POWER WAGON HARD BODYThe Power Wagon offers the high level of scale detail possible only with a molded ABS hard body. You can add to its realism by installing the included overlanding rack and accessories. OFFICIALLY LICENSED INTERCO SUPER SWAMPER PRO-LINE TIRES & IMPULSE BEAD-LOC WHEELSIncluded Pro-Line Super Swamper high performance tires mounted on easy-to-use, 3-piece Pro-Line Impulse beadlock wheels provide scale looks and superior traction. OIL-FILLED SHOCKSOil-filled shocks allow the suspension to articulate smoothly over rough terrain. You can adjust the preload to fine-tune your rig for your handling needs. SPEKTRUM SLT2 2.4GHz RADIO SYSTEMThe Spektrum SLT2 2-channel radio system offers high-end features such as throttle/steering travel adjust and throttle limiting. The RTR package is so complete, even AA transmitter batteries are included. STEEL C-CHANNEL CHASSIS FRAME RAILSJust like the 1/10 scale SCX10 platform, the SCX24 chassis features rugged and sturdy steel C-channel frame rails with bracing to keep everything intact and aligned. DYNAMITE BRUSHED MOTORThe included Dynamite 88T brushed electric motor provides the right amount of torque for making steep climbs. It's mated to a steel motor mount to keep flex to a minimum and help protect the gears. WORM GEARSThe front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and create higher ground clearance. FRONT AND REAR SOLID AXLE HOUSINGSThe front and rear axles consist of a two piece, molded composite solid axle design. For optimal handling, the SCX24 suspension features a three-link front and four-link rear setup. DURABLE STEEL AXLESSteel front and rear axles, front stub axles and steel dogbones provide strength and durability needed to keep running with confidence during tough climbs and over rough trails. SPLINED DRIVE SHAFTSThe front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels. 4-LINK REAR SUSPENSIONThe rear suspension geometry uses a 4-link design which is optimized to reduce axle steer and torque twist. FULL BALL BEARINGSJust because the SCX24 is small doesn't mean its features follow suit. There are no bushings here the drivetrain spins freely on sealed cartridge bearings throughout the entire vehicle.
Genuine FG spare/option part. FG stickers such as FG Logo, Team FG Modellsport, FG ORIGINAL TUNING PARTS a.s.o. for light and dark model paintings. Suitable for all FG models.Content:2 sheets, 240 x 170 mm each
Suitable for the lights on off-road cars like Losi 5ive-T or HPI Baja cars and also for embellishment of other body shells.Dimensions:Diameter: 32 mmContentt:Four teeth orange smiliesFour dead yellow smiliesFour red scullsFour green rc srokes
Genuine FG spare/option part. The Maxi-Grip tire develops more road grip and has a better balanced driving performance on a very uneven ground according to its bigger tire diameter and the improved rubber mixture. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Diameter x width: 165 x 65 mmRim with 18 mm square driveContent:2 pieces
Genuine FG spare/option part.Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Measures:Diameter: 145 mmWidth: 80 mmRim with 18 mm square drive.
fg_6225_05 Version:
6225/05M FG Super-grip knobbed tires glued, medium
Genuine FG spare/option part. The FG Super-Grip tires are available in a medium or soft hardness compound. The Super-Grip tire develops more road grip and has a better balanced driving performance on a very uneven ground according to its bigger tire diameter and the improved rubber mixture. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Diameter x width: 165 x 65 mmRim with 18 mm square driveContent:2 pieces
Genuine FG spare/option part.Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Measures:Diameter: 145 mmWidth: 63 mmRim with 18 mm square drive.
These Monster tires have a bigger square depth, this reduces a cylindrical turning of the square wheel significantly. To mount these tires you need a 18 mm wide square wheel driver. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Durchmesser x Breite / diameter x width 210 x 115 mmAlso suitable for:With the following wheel adapter: y1183 Rim adapter
Servo tape, simply that, tape for your servo and while this is an existing HPI Racing option part, you always seem to be bumming it off your friends. So it's time you stock up to repay debts in those field-service emergency fun situations.Contents:10 pieces
Genuine HT spare/option part. The Maxi-Pin competition tire is particularly suitable for tracks with a hard packed surface, as well as for tracks with a higher percentage of carpeting. The tread is not extended into the tire?s sidewall to reduce the side bite of the Maxi-Pin tire; the car remains controllable on such challenging tracks, which makes this tire a must-have for your "tire box"! Since the Maxi-Pin tire has many fine pins for a high number of biting edges and a low tread depth for reduced flex work, depending on the track?s surfaceincreased tire wear may be expected. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.For wet conditions the soft compound is recommended, under normal condition the medium compound is usually your best choice.Content:Diameter: 155 mmWidth: 67 mmPrices of the components:Maxi-Pin tires: 39,90 EUR / pairMaxi-Pin tire inserts: 9,90 EUR / pairRims FG 6105/01: 14,90 EUR / pairGlue set y0067: 13,30 EURTotal EUR 78.80Ready mounted and glued 69,90 EUR / pair. Rim with 18 mm square drive.Contents:2 pieces / 1 pairAlso suitable for:With the following wheel adapter: y1183 Rim adapter
Item N° GW78 GRP 1:6 Buggy "CROSS" tire not glued, 2 pcs.Tires will be delivery with inlays and without rims. - Aggressive medium sized x-pattern tread for the Extra soft version and big knobs tread for the S and M version.- Moderate directional stability - Very good lateral traction - Very good propulsion - For loose to medium packed surfacesTires are not glued!
€32.40*
This website uses cookies to ensure the best experience possible. More information...