Genuine MD spare/option part. The red version with a temperature resistant up to 300°C. Directions for use:Clean the surfaces with a cleaner. Apply MD-Sil on one side and press the parts together. Touch-dry in 10 - 20 minutes. Curing speed 3 mm/24 hours. Contents:1 piece / 80 ml
Especially for installation of all engine gaskets. Temperature resistant from -55 °C to +200 °C. Resistant to water, mineral oils, synthetic lubricants, fuels, organic solvents and refrigerants. info: Hand tight: 10 - 20 minReady to use: 1 - 3 hoursGap fill: 0.5 mmContent: 50 ml Notes for usage: This surface seal is not for use as the sole sealant, it should always be applied in combination with a paper gasket.The HT-surface sealing agent should be sparsely applied over the entire surface, with care being taken that the sealant does not enter the devices internals (e.g. crankcase, differential a.s.o.) during the assembly.
Bindulin liquid rubber - very high elasticitySuitable for additional sealing of tuned pipes and exhaust / manifold connections .Temperature resistant from -60 ° to + 180 ° CResistant against diluted acids.Also for sealing threaded joints, electric lines and cable lead-throughs in receiver boxes.The surfaces must be clean, grease free and dry (brake cleaner).Contents:1 piece / 45 grams
For all tire adhesives above,15 ml pump spray bottleAccelerator-spray is the second component to cure superglue immediately.Advantages: Tangible adhesion after a few seconds Aromatic solvents and hexane free Suitable for hobby, craft, industry and household.Processing:Clean the surface thoroughly. Apply accelerator at room temperature on both surfaces to be bonded until a clear liquid film appears. Air out the applied accelerator, then apply the superglue as usual.
The Lightscale spoiler for touring cars is a form-blown plastic part which is hollow inside and the outside has the effective wing shape. The plastic used is extremely durable and lightweight. The lateral supports are formed of Lexan and offer the possibility to set the wing at an angle and adjust the hight. The integrated carbon wingrestraints facilitates a securely screwed wing. The shape of the wing is optimized to bring a good downforce at minimum storage effect, thus ensuring the safe driving through fast corners without sacrificing top speed on straight sections. The total weight of the wing, including all attachments is about 60 grams and is therefore lighter then many carbon wings. The wing has already proved it's durability during crash tests, but still of course all its components are also available separately.
Genuine Samba spare/option part. Moca Racing air box carbon ultralight with aluminum adapter, foam filter and breakage protector.DMC no. 5-1801.Contents:1 set
Genuine TLR spare/option part.Printed instruction manual as included with every new Losi 5ive-B.Languages:GermanEnglishFrenchItalienischSpanishDimensions:Height: 295 mmWidth: 215 mm87 pages
Item N° GW71 GRP 1:6 Buggy "BULDOG" Reifen ungeklebt, 2 St.Tires will be delivery with inlays and without rims. - Medium aggressive knobby tread - Good directional stability - Good lateral traction - Good propulsion - For solid surfacesTires are not glued!Tire diameter: 164 mmTire width: 61 mm
Genuine Samba spare/option part. Our Carbon Rear Wing design in the "spoon" style.We use our special rear wing mounting structure also for this wing which makes the stability and the fixing of the wing easy.Very strong structure.Weight: 58 gramContents:1 piece
Key Features Realistic 1967 Chevrolet C10 Truck body True, full-time 4-wheel drive 3-Link front and 4-link rear suspension for optimal handling Full ball bearing drivetrain Realistic steel frame rails for added strength Features Axial® AS-1 servo with servo saver Dynamite® 7.4V 350mAh 30C LiPo battery Dynamite® 030-size, 88T Brushed Electric Motor Realistic 1967 Chevrolet C10 Truck body Two bright LEDs in front bumper for night driving True, full-time 4-wheel drive 3-Link front and 4-link rear suspension for optimal handling Worm drive gears for front and rear axles that add ground clearance Realistic steel frame rails for added strength Hinged body system for easy access to on-board components Full ball bearing drivetrain Licensed wheels modeled after 1:1 Method Wheels Licensed tires modeled after 1:1 BF Goodrich Tires The detailed, ready-to-run 1967 Chevrolet C10 Truck is the latest model in the popular SCX24 series from Axial® Racing. Its compact, versatile 1/24 scale size opens up almost any environment to spur-of-the-moment RC crawling expeditions. When its time for a break at work, set up an obstacle course with items on your desk for the SCX24 Chevrolet C10 Truck to negotiate. Any room at home can also become the setting for exciting feats and contests. If youd rather run outdoors, go for it! Collect some twigs and marble-size rocks, dig a few holes, and soon youll have a challenging trail for fresh air adventuring. Your trucks water-resistant electronics save you from having to worry about wet track conditions when you crawl.With its realistic steel chassis frame rails, steel front and rear axles, and steel dogbones, this model has the strength to deliver Axial®-caliber crawling performance even in 1/24 scale. Its designed to keep right on running through rough trails and tough climbs. The SCX24 1967 Chevrolet C10 comes ready-to-run with all of the electronics, transmitter, receiver, servos, motor, ESC, batteries and charger included.
Genuine FG spare/option part. FG stickers such as FG Logo, Team FG Modellsport, FG ORIGINAL TUNING PARTS a.s.o. for light and dark model paintings. Suitable for all FG models.Content:2 sheets, 240 x 170 mm each
Suitable for the lights on off-road cars like Losi 5ive-T or HPI Baja cars and also for embellishment of other body shells.Dimensions:Diameter: 32 mmContentt:Four teeth orange smiliesFour dead yellow smiliesFour red scullsFour green rc srokes
Genuine FG spare/option part. The Maxi-Grip tire develops more road grip and has a better balanced driving performance on a very uneven ground according to its bigger tire diameter and the improved rubber mixture. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Diameter x width: 165 x 65 mmRim with 18 mm square driveContent:2 pieces
Genuine FG spare/option part.Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Measures:Diameter: 145 mmWidth: 80 mmRim with 18 mm square drive.
fg_6225_05 Version:
6225/05M FG Super-grip knobbed tires glued, medium
Genuine FG spare/option part. The FG Super-Grip tires are available in a medium or soft hardness compound. The Super-Grip tire develops more road grip and has a better balanced driving performance on a very uneven ground according to its bigger tire diameter and the improved rubber mixture. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Diameter x width: 165 x 65 mmRim with 18 mm square driveContent:2 pieces
Genuine FG spare/option part.Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Measures:Diameter: 145 mmWidth: 63 mmRim with 18 mm square drive.
€107.95*
This website uses cookies to ensure the best experience possible. More information...