20 products found for "y1432"

rc-car-online - Home

y1432 Clamping ring

Genuine Losi spare/option part. Dimensions:Outside diameter: 21,5 mminside diameter: 17,5 mmThickness: 2 mmOrifice: 4 mm Content:10 pieces

€5.90*

y1433 Protect bellow for ball stabilizer

Genuine HT spare/option part. Protects stabilizer ball and stabilizer socket against dirt and prevents a clamping as well as a stiffness of the ball stabilizer. Suitable for the ball stabilizer of front and rear axle of Competition 07, Evo 04, Evo 07, Evo 08 and for Evo 2020..Dimensions:Inner diameters: 5 mm/15 mmLength: 52 mmContent:2 piece

€14.90*

y1439 Decal set for BMW M3 Superstars

Spare part for y1437 BMW M3 Superstar body shell.

€25.00*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y1434 VL32 Multi Oil Pen for RC-Car sport

Universal maintenance oil which has a high resistance to environmental influences; it is penetrating and moisture displacing with an excellent corrosion protection. Precise application is possible with the VL32 - Multipen's metal syringe tip. The ergonomic shape and rubberized handle provide a secure grip. Leakage of oil is prevented by the safety valve in the cap. Application: u> b>Pull off cap (avoiding strong pressure on the pen!), position the pen to the point of lubrication and press. Refit cap after use.Content:12 ml / 1 piece

Content: 12 Milliliter (€741.67* / 1000 Milliliter)

€8.90*

y1435 Connecting Spring for pipes

Genuine HT spare/option part. Dimensions:Lenght: approx 18 mmWire thickness: 0,8 mmContent:10 pieces

€7.90*

y1452 Variable body mount extension, aluminum

Genuine HT spare/option part. Set of two aluminum body mount extensions with two holes for body support and fixation clips.The 8.5 x 1.0 mm female thread perfectly fits the usual stock 8 mm body mounts non-cutting. The thread depth of about 22 mm allows for about 10 - 15 mm of body position adjustment!Content:2 pieces

€14.90*

y1442 Audi RS5 DTM car specific decal set

Car specific decal set for y1441 Audi RS5 DTM body shell.

€19.95*

y1430 Spark plug tester for 1/5 & 1/6 cars

The spark plug tester wiil be put in line between the spark plug in the engine and the spark plug cap. When the spark plug is in good working order, pulling the recoil starter will produce a spark easily visible in the clear section of the tester (see video!).

€14.90*

y1032 HT Aluminum shock tower Marder 2WD

Genuine HT spare/option part.Fits Marder, Beetle, Pajero and Monster Beetle,Material thickness:6 mmContents:1 piece

€47.90*

y1412 MadMax CROSS BOND one pair front and one pair rear

Genuine MadMax spare/option part.Losi and HPI foam tire inserts from can be used.The extremely rigid and differently structured lugs of the CROSS BOND ensure optimum power transmission and also allow for excellent grip on loose surfaces, such as sand and soil. The lugs are raised at the treads outside, and therefore provide maximum grip, particularly when cornering where the tire is canted to the outside.Dimensions:Outer diameter: 170 mmTyre width front: 60 mmTyre width rear: 80 mmContents:4 pieces / 2 pairs Some off-road tires knowledge can be found here!

€49.90*

y1422 Clamping ring for engine quick mount

Genuine HT spare/option part. Spare part for engine quick mount y1421.

€39.95*

y1437 BMW M3 Superstars, unpainted 2mm with rear spoiler

The set is supplied crystal clear/unpainted! Lexan thickness 2mm The body is not drilled, therefore suitable for all 1/5th scale models with a 535 mm wheelbase. EFRA number: 5063/14 Available in the following thicknesses: 1.00 mm thickness (in the set without rear spoiler) y1437/02 1.50 mm thickness (in the set without rear spoiler) y1437/01 2.00 mm thickness (in set with rear spoiler) y1437 (selected) Rear spoiler: 8147 FG spoiler BMW 320si WTCC and BMW M3 Superstars The set is delivered not painted. The body is not drilled and fits touring cars of all 1/5 scale brands with a 535 mm wheelbase.EFRA number: 5063/14Rear Wing:8147 FG Rear wing BMW 320si WTCC and BMW M3 SuperstarsRequired body mounts:Mount front: FG 7020/12 Front bumper Rear body mount: FG 7152/01 Rear body mount Side body mount front: FG 7012 Body mounts Side body mount rear: FG 7014 Body mounts Measures:Length: 890 mmWidth: 392 mmHeigth: 260 mmWheelbase: 530 mm

€199.90*

y1437/01 BMW M3 Superstars, unpainted 1,5 mm

The set is supplied crystal clear/unpainted! Lexan thickness 1,5 mm The body is not drilled, therefore suitable for all 1/5th scale models with a 535 mm wheelbase. EFRA number: 5063/14 Available in the following thicknesses: 1.00 mm thickness (in the set without rear spoiler) y1437/02 1.50 mm thickness (in the set without rear spoiler) y1437/01 (selected) 2.00 mm thickness (in set with rear spoiler) y1437 The set is delivered not painted.The body is not drilled and fits touring cars of all 1/5 scale brands with a 535 mm wheelbase.EFRA number: 5063/14Rear Wing:8147 FG Rear wing BMW 320si WTCC and BMW M3 SuperstarsRequired body mounts:Mount front: FG 7020/12 Front bumperRear body mount: FG 7152/01 Rear body mountSide body mount front: FG 7012 Body mountsSide body mount rear: FG 7014 Body mountsMeasures:Length: 890 mmWidth: 392 mmHeigth: 260 mmWheelbase: 530 mm

€199.90*

y1436 SPEED TEC CRANK Ignition-System (CIS)

y1436 Tools: y1436/01 Assembly wrench+ 29.9EUR

New ignition system for RC Car race engines with air baffles, special 62 mm balanced flywheel, modified ignition coil mount and special Löhin tuning ignition (#1361). For Zenoah G230/240/260/270/290/320 und CY / Fuelie / Losi engines.A much smaller and lighter flywheel, in conjunction with the special air baffles, ensures that the engine gets more cooling air then with previously available modified flywheels! The fan from the CIS-ignition with fins on both sides is about 30% lighter (!) than the stock version! Needless to say an engine equipped with such a flywheel revs considerably faster and significantly higher, of course. This in itself is nothing new, because modified flywheels, even though not 30% lighter, are pretty common on modified engines. However, the problem with these modified flywheels is maintaining sufficient cooling for the engine, which is absolutely mandatory for a reliably running engine! The 20% smaller in diameter flywheel is primarily responsible for the very substantial performance increase by the SPEED TEC CRANK ignition . The lower inertia, which is quite crucial for engine performance, allows for an extremely fast and higher revving engine! The air baffles of the CIS-ignition ensure that the path of the cooling air is matched to the reduced diameter of the CIS-fan wheel and the engine gets more cooling! As our product video shows, the stock engine gained near 2,000 rpm through installation of the SPEED TEC CIS-ignition ! But perhaps the optimized torque is even more convincing. This for 30% reduced and 20% more centrally positioned flywheel mass gives your engine a stunning power increase. Other benefits of SPEED TEC CIS - ignition system: Fits all Zenoah, as well as HPI, Losi-, CY 1/5 & 1/6 engines (incl. Zenoah G320) No modifications to the cylinder or the ignition coil mount required! No assembly of the flywheel, thus 100% exact fit and running true The enclosed Löhin ignition system is designed for speeds up to 25,000 rpm! The baffles protect the flywheel from debris (stones, etc.) Complete with Löhin ignition and all necessary parts in a nice special bag Easy installation: Remove the stock ignition system - install the CIS-ignition - done! The color of the ignition cable and the spark plug cap may vary.

Variants from €329.00*

€358.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y1438 Front section BMW M3 Superstars, clear

y1438 Thickness: y1438/03 - 2,00 mm version+ 4.55EUR

Spare part for y1437 BMW M3 Superstar body shell.Available material thicknesses:1.0 mm2.0 mmPainting tips:

Variants from €32.95*

€34.21*

y1482 Spring band clamps for tuned pipe connectors, 22 to 34 mm diameter range

y1482 Size / piece: y1482/06-5 Spring band clamps 27 - 29 mm+ 4.5EUR

Genuine HT spare/option part.Spring band clamps are self-clamping and can self-adjust to diameter changes due to temperature variations or properties of the tube material.With this feature of self-adjustment, spring band clams are ideally suited for hose connections between exhaust manifold and tuned pipe with their high temperature load.Unlike worm drive clamps with their relatively large adjustment range, spring band clamps must be selected closely related to their intended application. For this purpose, the outer diameter of the hose in the mounted state must be measured. The clamp, whose nominal diameter corresponds most accurately to the value determined, should be used.In the options menu you can select from sizes ranging from 22 to 34 mm and packs of one or five clamps.Contents:1 piece / 5 pieces

Variants from €0.99*

€5.49*

y1423 Engine flange for engine quick mount, G320 version available for FG 1/5 models

y1423 Version: y1423/01 for all Zenoah and Chung Yang engines up to 30 cm³

Genuine HT spare/option part. For fitment on additional engines or as a spare part for engine quick mount y1421. The engine flange is available in two versions:y1423/01 for all Zenoah and Chung Yang engines up to 30 cm³ with standard bolt pattern 50 x 36 mmy1423/02 for Zenoah G320 - For installation of a Zenoah G320 in a FG Evo (Model range from 2004 till 2014). Fits the standard quick mount.When mounting the motor flange the bolts/nuts must be tightened together in small steps. To mount the studs from y1421/01 or the screws from y1421/02 the use of thread locking compound (link) is required.Please note: y1423/01 does not fit in combination with Zenoah OEM clutch!

€39.95*

y1437/03 BMW M3 Superstars 2 mm, Jägermeister painting

The set is delivered with Jägermeister painted. The body is not drilled and fits all 1/5 scale fabricate with a wheelbase of 535 mm.For additional cooling of the motor, there is the option of selecting a cooling air duct in the shopping basket selection.Required body mounts:Mount front: FG 7020/12 Front bumper Rear body mount: FG 7152/01 Rear body mount Side body mount front: FG 7012 Body mounts Side body mount rear: FG 7014 Body mounts Measures:Length: 890 mmWidth: 392 mmHeigth: 260 mmWheelbase: 530 mm

€279.90*

y1436/01 Assembly wrench for SPEED TEC CRANK-Ignition-System

Genuine SPEED TEC spare/option part. Contents:1 piece

€25.00*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y1437/02 BMW M3 Superstars, unpainted 1mm

The set is supplied crystal clear/unpainted! Lexan thickness 1 mm The body is not drilled, therefore suitable for all 1/5th scale models with a 535 mm wheelbase. EFRA number: 5063/14 Available in the following thicknesses: 1.00 mm thickness (in the set without rear spoiler) y1437/02 (selected)1.50 mm thickness (in the set without rear spoiler) y1437/01 2.00 mm thickness (in set with rear spoiler) y1437 The set is delivered not painted.The body is not drilled and fits touring cars of all 1/5 scale brands with a 535 mm wheelbase.EFRA number: 5063/14Rear Wing:8147 FG Rear wing BMW 320si WTCC and BMW M3 SuperstarsRequired body mounts:Mount front: FG 7020/12 Front bumperRear body mount: FG 7152/01 Rear body mountSide body mount front: FG 7012 Body mountsSide body mount rear: FG 7014 Body mounts

€199.90*

20 products found for "y1432"

Filter products

rc-car-online - Home