10 products found for "y1188"

rc-car-online - Home

y1188 Pin 4 x 18 mm, 10 pcs.

Hardened steel pins to replace lost or worn pins in driveshafts (dog bones) on FG / Carson / Smartech cars.It is recommended to use high strength thread locking compound for the installation.

€3.90*

y1588 Aluminum receiver antenna mount

Genuine rc-car-online spare/option part. Versatile aluminum bracket for easy installation in panels or RC boxes with up to 4 mm wall thickness. Only a 6 mm hole is required and the bracket is fastened with the included nut. Alternatively, for installation in thicker material an M6 thread can be tapped as well. An O-ring provides a seal when installed in RC boxes.The bracket has a stepped hole into which the common antenna tubes of about 3.2/3.3 mm diameter can be inserted, but not pushed through. The hole for the antenna cable has a diameter of approx. 2.5 mm.The height of the bracket above the mounting surface is 16 mm.The scope of delivery includes an end cap and two antenna tubes with a length of approx. 170 mm.Contents:1 set

€9.90*

y1189 Stadium wheels on disc rim, 2 pairs

Complete set of four CRT stadium tires and rims, mounted and glued with tire inserts. Fits FG and Carson 1/6 scale cars.Tire diameter 170 mm, tire width 80 mm, 18 mm wheel square. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Also suitable for:With the following wheel adapter: y1183 Rim adapter

€99.90*

y1198 Futaba transmitter charging cable - 1pce.

€6.20*

This product is no longer available.

Case screw set for Smartech, Mega Evo, Mega Evo Pro servos, y1168

€4.90*

Replacement bushings 5x6x6 mm, y1182, 8 pcs.

For upper HT alloy a-arms Gas Devil.Inner diameter 5 mmOuter diameter 6 mmWidth 6 mmSet of eight

€6.10*

y1388 Offroad tuning springs Dirt-Spring DBXL/XL-E +MTXL

y1388 Version: y1388/05 - 2,9 x 110 mm White, 1 pair

Genuine HT spare/option part. Fits Losi Desert Buggy XL stock shocks.The Desert Buggy XL stock springs use a high preload, which is even bigger than the shocks travel. This means that the stock spring action increases not that much going through the available suspension travel. To handle hard impacts high viscosity oil is used in the shocks; however, this oil is too heavy for these springs for a proper rebound. A sensible suspension tuning becomes much pretty difficult.For this reason, the tuning springs Dirt-Spring Desert Buggy XL are shorter than the stock springs, but also use heavier gauge wire in return. Therefore the change in spring action during the suspension travel is noticeably higher than the preload; the suspension settings can be influenced more effectively.Due to their different characteristics the stock springs are difficult to be sorted among the line of the tuning springs.As a rule of thumb theyre similar to the 2.7 mm version when used with the current 2000 viscosity oil factory fill.Dimensions:Inner diameter: 35 mmFree length: 110 mmNumber of turns: 9Versions:y1388/01 - 2,5 x 110 mm Ochery1388/02 - 2,6 x 110 mm Bluey1388/03 - 2,7 x 110 mm Greeny1388/04 - 2,8 x 110 mm Silvery1388/05 - 2,9 x 110 mm Whitey1388/06 - 3,0 x 110 mm Goldy1388/07 - 3,2 x 110 mm Pinky1388/08 - Complete set, unit prices: 132,93 EUR / Offer price: 89,99 EUR

€21.99*

y1183/01 Grooved pin 4x19 mm, replacement for HPI rim adaptor y1183, 5 pieces

Grooved pin 4x19 mm, replacement pins for HPI adaptor to install FG rims on HPI Baja cars.Diameter: 4 mmLenght: 19 mmDelivery contents: 5 pieces

€3.90*

y1183/04 Hardware set for wheel adapter FG rim to HPI car

Hardware set for wheel adapter FG rim to HPI car:y1183y1183/02y1183/03

€4.90*

y1183/02 FG rim to HPI model, drive rim adapter, separate for the front, 2 pcs.

Item N° y1183/02FG rim to HPI model, drive rim adapter, separate for the front, 2 pcs.These adapters are machined from gas nitrited steel and enable you to put standard rims with 18 mm square drive (FG, Carson, Lauterbacher a.s.o.) on the HPI Baja 5B/SS/T. The track width will be substantially increased.For a complete set covering front and rear axle you need part number y1183.This set includes rim adapters with installation hardware for the front axle only.Measures for front:Outer diameter: circa 17,59 mLength: circa 55,10 mm

€24.90*

10 products found for "y1188"

Filter products

rc-car-online - Home