Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

y1105 Exhaust port and carburetor intake cover plates, for most usual 23cc - 30cc engines

Product information "y1105 Exhaust port and carburetor intake cover plates, for most usual 23cc - 30cc engines"

Exhaust port and carburetor intake cover plates, made of 1 mm aluminum, fits most current 23cc - 30cc rc-car engines.

Exhaust port cover:
  • Total: approx. 20 x 45 mm
  • Mounting holes (ctr./ctr.): approx. 34 mm


carb intake cover:
  • Total: ellipse approx. 28 x 40 mm
  • Mounting holes (ctr./ctr.): approx. 31 mm

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

y19302/02 Piston Blocker for almost all engines
Genuine HT spare/option part. Helpful tool for removal of clutch shoes, flywheels and many more.FitsZenoah G230/G240/G260/G270/G290/G320Chung-Yang enginesPT enginesLosi enginesHPI enginesThreadsize:M10 x 1Contents:1 piece

€9.90*

Average rating of 0 out of 5 stars

7335 FG Insulator gasket for Zenoah / CY / Fuelie
Genuine FG spare/option part.For Zenoah G230/G240/G260/G270/G290Applications:Click here!Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContents:1 piece

€4.50*

Average rating of 0 out of 5 stars

7354/08 FG Spacer plate for CY / Zenoah / Fuelie
Genuine FG spare/option part.Installs between carb and air filter/airbox to assure choke flap clearance.Contents:1 piece

€11.30*

Average rating of 0 out of 5 stars

TT0990 Top Tuning Failsafe with kill switch and status LED for all transmitters
Genuine TT spare/option part.The new and improved failsafe modul.This kill switch module works with most FM and 2.4 GHz rc-systems. Not compatible with AVC-equipped receivers! You must have a free channel on your rc-system in order to install the module! This means at least a 3-channel radio for standard 1-servo brake/throttle setups or a 4-channel radio for dual brake servos driven by the radio's mixer function. With this module you can stop the engine with your radio. Additionally the module features a failsafe function which stops the engine when the rx-battery's voltage drops below a certain level or the rc-system has a glitch. A kill switch module fulfils two tasks. On the one hand, as a safety device, it is intended to shut off an engine with magneto ignition in case of failure of the remote control, and on the other hand, the engine can be stopped at any time by remote control.While the latter is mainly used for convenience, the safety aspect is what really matters.The failsave circuit integrated in all modern remote controls may brake the vehicle in the event of a radio interference, but this feature is dependent on the basic functionality of the receiver system and its power supply. However, if the receiver, the gas servo or the power supply fails completely, the failsave of the remote control can no longer do its job. The vehicle may be running haywire at full throttle.In these cases, the kill switch will cut the ignition of the engine and the vehicle will roll out without power.Features:Ready to install no soldering requiredRemote LED for easy-to-spot operational status (ignition live/killed)Optically coupled to isolate the ignition from the radio systemThreshold value for undervoltage protection (4V, 5V, 6V) adjustable with jumpers allows adaptation to the rx-battery type (LiPo, LiFePo, NiMH, NiCd)Contents:1 piece

€47.90*

Average rating of 0 out of 5 stars

7337 FG Carburetor gasket for CY / Zenoah / Fuelie
Genuine FG spare/option part.For Zenoah G230/G240/G260/G270/G290/G320Applications:Click here!Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContents:1 piece

€5.90*

Similar products

Average rating of 0 out of 5 stars

6402/01 FG Exhaust hose
Genuine FG spare/option part. Heavy gauge teflon tube for connection between exhaust manifold and tuned pipe with da inside diameter from 21 mm and a length from 50 mm.You may have to heat the tube with a cigarette lighter for installation.Contents:1 piece

Content: 5 Zentimeter (€270.00* / 100 Zentimeter)

€13.50*

Average rating of 0 out of 5 stars

7117 Samba 7 Connecting set for Samba 7 and Samba 8 / new Version
Genuine Samba spare/option part.Connecting springs for Samba 7 and 8 pipes in the latest version.Dimensions:Length: approx 18 mmWire thickness: 0,8 mmContents:8x Connection springs2x Silicone damperring2x Viton O-Ring 20 x 2,5 mm

€12.90*

Average rating of 0 out of 5 stars

y19031/01 Silicone exhaust hose extrem reinforced 22/30 mm
Genuine HT spare/option part. Very strong, multiple glas fiber layers, nevertheless very stretchable. Resist maximum temperatures up to 250°C (482°F) from.Needs hose clamps with at least 35 mm inner diameter! Maße:Inside diameter: 22 mm Outside diameter: 30 mmWall thickness: 4 mmLength: 50 mmContents:1 piece

€9.90*

Average rating of 0 out of 5 stars

7110 Samba Installation kit for 50 mm pipes
Genuine Samba spare/option part. Fits Samba F1 Titanium RS5, Samba F1 Titanium FG, Samba 6 Titan, Samba 7, No. FG #7406 FG Steel Side Power and many other tuned pipes with a diameter of 50 mm. Please check first whether the installed pipe mount has the right height in the car so that the alignment of the tuned pipe to engine is still appropriate.Contents:1 set

€29.90*

Average rating of 0 out of 5 stars

7407/03 FG Silicon tube Ø45 x 10 x 2mm
Genuine FG spare/option part.Replacement part for 7407 CFRP supporting brace f. Tun. pipe, set Contents:2 pieces

€4.90*

Average rating of 0 out of 5 stars

7111 Samba 7 Connecting set
Genuine Samba spare/option part.Connecting springs for Samba 7 pipes.Dimensions:Length: approx 18 mmWire thickness: 0,8 mmContents:8x Connection springs2x Silicone damperring2x Viton O-Ring 20 x 1,5 mm

€12.90*

Average rating of 0 out of 5 stars

y1444/01 Temperature resistant cable ties 4,8 x 290 mm
Genuine HT spare/option part. Particularly advantageous for installation of tuned pipe exhausts. Content:20 pieces

€4.95*

Average rating of 0 out of 5 stars

y1435 Connecting Spring for pipes
Genuine HT spare/option part. Dimensions:Lenght: approx 18 mmWire thickness: 0,8 mmContent:10 pieces

€7.90*

Average rating of 0 out of 5 stars

y0393 Mounting wire for Samba pipes - 1pce.
Wire diameter 2.5 mm, cut and bend as needed.

€3.90*

Average rating of 0 out of 5 stars

y0387 Exhaust hose with grooves for hose clamps
Heavy gauge exhaust hose with grooves for the hose clamps. Dimensions:Length: 54 mmGroove diameter: 25 mmOuter diameter: 28 mmInner diameter: approx. 15 mm

€6.90*

Average rating of 0 out of 5 stars

y0171 Teflon Tube
Genuine HT spare/option part.Dimensions:Inna diameter: 21 mmOuter diameter: 23 mmLength: 50 mm / 70 mmContents:1 piece

Content: 5 Zentimeter (€148.00* / 100 Zentimeter)

From €7.40*

Average rating of 0 out of 5 stars

LOS256009 Losi Exhaust Deflector and Spring Clip MTXL
Genuine Losi spare/option part.Contents:1 piece

€10.99*

Customers also viewed

Average rating of 0 out of 5 stars

y6107/01 Wheel squares 18 mm HART-COAT, 14 mm wide
Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)14 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 14 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€17.45*

Average rating of 0 out of 5 stars

7303 Samba 7 Titan Racing tuned pipe system ESW DMC 50-1101
The Samba 7 titanium gives you a weight saving of 140 grams compared to the steel version. We have tested and optimized the Samba 7 Titan- tuned pipe system for half a year on the engine dyno and an additional three months on various racetracks! The pipe has a new, very strong connection system. This low-maintenance flexible connection between pipe and manifold is secured by four (!) springsDespite of the increased performance fuel consumption remains the same compared to a Samba 6 pipe. The Samba 7 system provides significantly better performance, i.e. the power is optimally available across the engines entire rpm range! New New connection from exhaust to manifold Lower center of gravity through new alignment Also suitable for 510 wheelbaseSamba 7 can also be installed in cars equipped with Magura 2 hydraulic brakes (see pictures).Of course, the Samba 7 tuned pipe system is race legal for racing, with the DMC approval number 50-1101 engraved. The Samba 7 - tuned pipe system comes with an installation kit.Fits: All On-road cars from FGContrastBergonzoniHarmGeniusand many others as well<Will fit medium (510 mm) wheelbase cars from FG as wellOriginal statement from Samba: "This new tuned pipe system is the result of the development"

€399.00*

Average rating of 0 out of 5 stars

6714/13 FG Pan-head tapping screws 2,9x13 mm, 15 pieces
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:15 pieces

€2.20*

Average rating of 0 out of 5 stars

7355/08 FG Carburetor type: Walbro WT603B
Genuine FG spare/option part.Standard carburetor for Zenoah G230/260. Carb has integrated choke.Typ: Walbro WT603B.Contents:1 piece

€99.90*

Average rating of 0 out of 5 stars

Mecatech FW01 Touring car, wheelbase 510 mm, Chassis Kit -- Europe- and world champion
The Mecatech FW01 is for sure the currently most innovative 1/5 race car designed for the dedicated and technically enthusiastic rc car driver.Everyone is enthusiastic about the perfectly fitting and precise workmanship at the highest level. Only high quality materials are used for the production.Since many years Mecatech is a well-know premium manufacturer of largescale hydraulic brakes or shocks and, as only a few may know, a technology expert for a number of Formula 1 racing teams!The Chassis Kit of the FW01 is particulary intended for "switchers" and "newcomers" and differs from the Basic kit in that the brakes and shock absorbers are already included in the Chassis Kit. Here is a list of the parts that are required for completion:brakes and shocks (Difference to Chassis Kit)DifferentialEngine Clutch, Airbox and tuned pipe systembody shell and tiresElectonic components such as servos, batteries and Remote controlStock gearing:Clutch pinion / spur gear: 36T / 64TLayshaft pinion / differential: 24T / 73T Currently the Mecatech FW01 is for sure the benchmark of the 1/5 scale racing scene! In the first year Markus Feldmann won with his FW01 1: 5 Mecatech on one of the world's finest and most demanding race track in Lostallo / SwitzerlandMecatech is multiple German, European and World Champion with the FW01 and as the last result:Markus Feldman wins the European Championship in Tourlaville/France. All top 5 positions went to drivers running a Mecatech FW01. 7 out of 10 finalists cars were Mecatech FW01.Although the fit of the Mecatech FW01 parts makes the assembly of the car a great experience, some of our customers want to use the expertise of our shop and wish their FW01 fully assembled and tuned in by us!The complete assembly of your FW01 by our workshop is possible for an additional charge. Please note that the costs of the full assembly with servos a.s.o. do not include the price of any rc-components. If you do not have a suitable radio system with servos and batteries as well as switch and charger, you have to take an additional EUR 800 to EUR 1,500 for this equipment into account. We will be happy to make you an appropriate offer. We always supply the latest version of the Mecatech FW01Included in the chassis kit:- All pinions- clutch bell- Coupling fixation- All parts and screws for mounting the enginenot included:- differential- Engine and linkage- body shell and spoilers- Airbox- clutch - engine- Electronics- Tires

€2,670.00*

Average rating of 0 out of 5 stars

5180 FG Body set Mini Cooper, clear 2 mm for 510/515er wheelbase
Genuine FG spare/option part. The body kit consists of the main body part and partial front and rear spoiler. The body is unpainted. The body shell is vac-formed from 2 mm Lexan.Required body mounts:Mount front: FG 7020/11 Front bumper Side body mount front: FG 7012 Body mounts Side body mount rear: FG 3014 Body mounts Rear body mount: FG 7155 Rear body mountDimensions:Length: 780 mmWidth: 392 mmHeight: 280 mmWheelbase: 510 mmContents:1 piece Painting tips:

€209.50*

Average rating of 0 out of 5 stars

7100/02 Samba spare parts set B for Samba 7
Genuine Samba spare/option part.O-ring dimensions:20 x 1.5 mmContent:2 pieces

€3.90*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Theme Development