29 products found for "y1043"

rc-car-online - Home

y1043 connector straight for hydraulic brakes - 1 pce

connector straight for all hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.Connecting thread M5

€8.90*

y1045 hydraulic brake lining 4mm - 1 St

hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.Length: 1 meterDimensions:Inner diameter: 2 mmOuter diameter: 4 mm

€4.90*

y1040 T-connector for hydr. brake system - 1 pce

T-connector for all hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.

€14.90*

y1048 HT Aluminum-Frontaxle for FG Sportsline

Genuine FG spare/option part. Suitable for FG Sportsline (old version, not 4wheel drive basic) and Eco-Line.The set includes:Item N°.Name:y1027HT Aluminum a-arm 2WD, front uppery1026HT Aluminum a-arm 2WD, front lower, one-piecey1209HT Aluminum front bulkhead A y1210HT Aluminum front bulkhead B y1036HT rose joints with conical spacersUnit prices: 318,30 EURPlease note: the hinge pins are not included, you will use the pins from the stock suspension!Additional parts shown on the pictures, like diskbrakes or other tuning parts, are only decoration and not part of the set. Contents:1 set

€269.00* €318.30* (15.49% saved)

y1041 Angle connector 90° for hydraulic brakes - 1 pce

Angle connector for all hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.Connecting thread M5

€12.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y1034 HT Aluminum front suspension for FG Off-Road Buggy 2WD, set

The sets include complete front bulkheads A + B with brace, upper (adjustable) and lower a-arms and shock tower.Please note: the hinge pins are not included, you will use the pins from the stock suspension!The sets include:Item N°Name:y1027HT Aluminum a-arm 2WD, front uppery1026HT Aluminum a-arm 2WD, front lower, one-piecey1028HT Aluminum front bulkhead A for 2WDy1030HT Aluminum front bulkhead B for 2WDy1036HT rose joints with conical spacersy1029HT aluminum droop stopsy1035HT Aluminum shock tower Off-Road Buggy 2WDy1031HT Aluminum bulkhead brace for 2WDUnit prices: 387,10 EURFits FG Off-Road Buggy 2WD.This front suspension can be used on a FG Monster Beetl 2WD as well, however some new holes must be drilled into the shock tower for this application.

€339.00* €387.10* (12.43% saved)

y1046 Clemps for hydraulic brake lining 4 mm

Genuine rc-car-online spare/option part. Clemps for hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.Contents:8 pieces with mounting screws

€9.50*

y1013 Motul Air filter oil for foam filters

Genuine Motul spare/option part. High-cling oil for foam cartridge air filters, especially for offroad and street use. The oil reinforces the the air filter'e efficiency and retains dirt, mud and sand particles, which will greatly extend the life of the engine. The blue tint makes it easier to control even oil application to the filter.Apply oil to filter generously and work the foam vigorously by hand to ensure complete oil penetration. Press foam slightly to remove excessive oil when done.Contents:1 piece / 400 ml

Content: 400 Milliliter (€47.25* / 1000 Milliliter)

€18.90*

y1044 Y-connector for hydr. brake system - 1 pce

Y-connector for all hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.

€14.90*

y1042 Angle connector 45° for hydraulic brakes - 1 pce

Angle connector for all hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.Connecting thread M5

€12.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y1033 HT Aluminum front suspension for FG Marder, Beetle, Pajero, Monster Beetle 2WD, set

The sets include:Item N°Name:y1027HT Aluminum a-arm 2WD, front uppery1026HT Aluminum a-arm 2WD, front lower, one-piecey1028HT Aluminum front bulkhead A for 2WDy1030HT Aluminum front bulkhead B for 2WDy1036HT rose joints with conical spacersy1029HT aluminum droop stopsy1032HT Aluminum shock tower Marder 2WDy1031HT Aluminum bulkhead brace for 2WDUnit prices: 391,00 EURThe sets include complete front bulkheads A + B with brace, upper (adjustable) and lower a-arms and shock tower.Please note: the hinge pins are not included, you will use the pins from the stock suspension!Fits FG Marder, Beetle, Pajero and Monster Beetle.

€339.00* €391.00* (13.3% saved)

y0043 Steel shims DIN 988, 15 x 21 x 0.2 mm, 10 pcs.

Steel shimsPart is delivered in silver or black color from vendor!Dimensions:Inner diameter: 15 mmOuter diameter: 21 mmThickness: 0.2 mm

€4.90*

HT Aluminum front suspension for Carson / Smartech C5, UNO / R5, Attack, Superattack, GasBlaster and Touareg, y1047 - Set

The set includes:Item N°.Name:y1027HT Aluminum a-arm 2WD, front uppery1026HT Aluminum a-arm 2WD, front lower, one-piecey1209HT Aluminum front bulkhead A for Carson Comanche, Attack Evo, CRT 2WD + CPTy1210HT Aluminum front bulkhead B for Carson Comanche, Attack Evo, CRT 2WD + CPTy1036HT rose joints with conical spacersUnit prices: 269,00 EURPlease note: the hinge pins are not included, you will use the pins from the stock suspension!Fits on Carson 1/6 / 1:5(Attack, SuperAttack, GasBlaster and Tuareg) and Smartech UNO

€269.00*

HT Aluminum rear suspension conversion kit for Smartech UNO, Carson Attack / Super Attack / Gas Blaster / C5 / R5, 2WD , y1003, set

Alloy rear axle conversion kit for Smartech UNO and Carson Attack and Super Attack (not Evo!), Gas Blaster and C5; Smartech Spider and Ranger cars.Fits for:- C5 / On road / Touring car- C6 Attack- Touareg- Super Attack- Gas Blaster- Duratrax Firehammer- Spider- Big AttackThe set includes:- rear plate- differential mounts- lower a-arms- upper a-arms- installation hardware.Please note: must use inge pins 6075, also you need two packets turnbuckle 40 mm 6100/04.

€299.90*

y19043 HT-Racin Oil

Fully synthetic 2-stroke engine oil, one bottle per 2.5 liters of gas.100ml bottle

Content: 100 Milliliter (€76.50* / 1000 Milliliter)

€7.65* €8.50* (10% saved)

y1023 MadMax CROSS BOND 170x80/x60 complete set for Traxxas X-MAXX 4x4 with adapter

Offerset:1 Pair MadMax Cross Bond front tires 170x60 mm1 Pair MadMax Cross Bond rear tires 170x80 mm1 Pair MadMax front rims 60 mm1 Pair MadMax rear rims 80 mm1 Pair MadMax front inlays 60 mm1 Pair MadMax rear inlays 80 mm2 Pairs / 4 pieces adapter TT1020/01CROSS BOND 170 x 80 mm and 170 x 60 mm tires with black MadMax Extreme 20 bolt-beadlock rims with 24 mm hex drive and reinforced beadlock rings were designed for use on loose surfaces. The extremely rigid and differently structured lugs of the CROSS BOND ensure optimum power transmission and also allow for excellent grip on loose surfaces, such as sand and soil. The lugs are raised at the treads outside, and therefore provide maximum grip, particularly when cornering where the tire is canted to the outside. Due to the extreme load created by the MadMax CROSS BOND tires the rim was optimized again with a reinforcement ring.The tires are fitted with a special rigid insert, which can handle the cornering forces and maintain the tires shape even on heavy cars.The set consists of two each front and rear tires, including tire inserts and MadMax EXTREME rims and 4 pieces adapter wheel nuts TT1020/01. We recommend to check the beadlock screws after the run. Dimensions:Outer diameter: 170 mmFront tire width: 60 mmRear tire width: 80 mmReinforced 24 mm hex driveThe video shows the 18 mm square drive version. Also available with 24 mm hex. Some off-road tires knowledge can be found here!TT1020 Top Tuning Adapter wheel nutGenuine TopTuning spare/option part.These adapter nuts, manufactured from billet 7075 aluminum allow for easy and precise installation of all MadMax, HPI and Losi tires and rims on the Traxxas X-Maxx. For the best result possible, nut and adapter are manufactured as a one-piece unit.It should be noted that the wide rims can be used on the rear axle only. On the front axle they would limit the steering angle by grinding on lower a-arm and steering rod.Traxxas has microencapsulated the wheel shafts of the X-Maxx to secure the wheel nuts. Like any thread locking compound this is not for eternity. After several tire changes the use of a normal screw locking compound is advised, we recommend it "y0113 / 01 medium strength".The dimensions of the nut are specifically designed for use with MadMax, current HPI and Losi rims. Rims from Losi 5ive have slightly different dimensions in the hub area. This is meaningless on the large LOSI or HPI wheel adapters. With the smaller and shorter wheel nut thread of the X-Maxx wheel shafts you cannot compromise. Therefore there are also special nuts for the Losi rims/wheels available at our options menu.However, somewhere in the past, the injection moulds for the HPI rims were slightly modified in the hub area. As part of that job the bore diameter has probably been slightly increased. Therefore, the use of older rims in combination with the adapter nuts makes it necessary to increase the rim bore a little bit.Due to repeated requests for use: these wheel nuts replace the stock wheel nuts when installing the wheels!Contents:4 pieces

From €139.90*

Details

10437 FG Hexagon nut M7 right-handed thread

Genuine FG spare/option part. Specially produced small hexagon nuts with right-hand thread to fix the steel ball-and-socket joints with the wishbone thread rods M7. Dimensions:Hex size: 8 mmThickness: 3 mmPart is delivered in silver or black color from vendor!Contents:1 piece

€4.70*

10435 FG Steel ball-and-socket joint F1 Ø4/M7 right

Genuine FG spare/option part. Solid steel ball-and-socket joints with 4mm boring in the steel ball and M7 right handed thread. Clearance- and maintenance-free. Useable for the F1 front and rear axle instead of the plastic ball-and-socket joints 10mm 10027 and 10027/07.For mounting the wishbone thread rods M7 and hexagon nuts M7 with right-handed thread 10437, 10437/01 are necessary. Dimensions:A = 4 mmB = M7C = 14.5 mmD = 16.5 mmE = 45.7 mmContents:2 pieces

€29.90*

10436 FG Steel ball-and-socket joint F1 Ø5/M7 right

Genuine FG spare/option part. Solid steel ball-and-socket joints with 4mm boring in the steel ball and M7 right handed thread. Clearance- and maintenance-free. Useable for the F1 front and rear axle instead of the plastic ball-and-socket joints 10mm 10027 and 10027/07.For mounting the wishbone thread rods M7 and hexagon nuts M7 with right-handed thread 10437, 10437/01 are necessary. Dimensions:A = 5 mmB = M7C = 14.5 mmD = 16.5 mmE = 45.7 mmContents:2 pieces

€29.90*

10430 FG Upper/lower alloy wishbone left for F1 - 1pce.

Manufactured in high-strength alloy. Free from play, twisting-firm with exchangeable ball-type nipple. For mounting the wishbone threaded rods , , , or are needed as well as one ball-type nippe each wishbone.

€49.90*

y1042/01 Angle connector with adaptor 45° for hydraulic brakes

Angle connector for all hydraulic brake linings with a outside diammeter of 4 mm. e.g Colari, Magura II and Mecatech.

€12.90*

10432 FG Front lower alloy wishbone for F1 right and left

€44.00*

LOS251043 Losi Brake set MTXL

Genuine Losi spare/option part.Contents:1 set

€39.99*

10437/01 FG Hexagon nut M7 left-handed thread

Genuine FG spare/option part. Specially produced small hexagon nuts with left-hand thread to fix the steel ball-and-socket joints with the wishbone thread rods M7.Maße:Hex size: 8 mmThickness: 3 mmPart is delivered in silver or black color from vendor!Contents:2 pieces

€4.70*

29 products found for "y1043"

Filter products

rc-car-online - Home