32 products found for "y1040"

rc-car-online - Home

y1040 T-connector for hydr. brake system - 1 pce

T-connector for all hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.

€14.90*

y1030 HT Aluminum front bulkhead B for 2WD

Genuine HT spare/option part. Comes with two pairs of special bushings to adjust camber changes during the suspension movement.Fits 1/6 cars like Marder, Monster Models, Pajero, Beetle and many more.Contents:1 piece

€28.90*

y1048 HT Aluminum-Frontaxle for FG Sportsline

Genuine FG spare/option part. Suitable for FG Sportsline (old version, not 4wheel drive basic) and Eco-Line.The set includes:Item N°.Name:y1027HT Aluminum a-arm 2WD, front uppery1026HT Aluminum a-arm 2WD, front lower, one-piecey1209HT Aluminum front bulkhead A y1210HT Aluminum front bulkhead B y1036HT rose joints with conical spacersUnit prices: 318,30 EURPlease note: the hinge pins are not included, you will use the pins from the stock suspension!Additional parts shown on the pictures, like diskbrakes or other tuning parts, are only decoration and not part of the set. Contents:1 set

€269.00* €318.30* (15.49% saved)

y1043 connector straight for hydraulic brakes - 1 pce

connector straight for all hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.Connecting thread M5

€8.90*

y1080 Painted Ford Mustang body shell 530/535 wheelbase

Unfortunately, the pin striping lines on the body shell have not been applied very carefully and should be reworked individually, if you place value on it. The body shell is vac-formed from 2 mm Lexan.Measures:Length: 890 mmWidth: 392 mmHeight: 220 mmRequired body mounts:Mount front: FG 7020/16 Front bumper Rear body mount: FG 7152/01 Rear body mount Side body mount front: FG 8013 Body mounts Side body mount rear: FG 3014 Body mounts

€79.90*

Configure now

y1041 Angle connector 90° for hydraulic brakes - 1 pce

Angle connector for all hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.Connecting thread M5

€12.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y1004 Driveshaft boots for ball drive + dogbones

Genuine HT spare/option part. Protect ball drive as well as cardan drive against dirt. For FG and Carson ball drives, fits standard dogbones as well.Contents:2 pieces

€8.90*

y1046 Clemps for hydraulic brake lining 4 mm

Genuine rc-car-online spare/option part. Clemps for hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.Contents:8 pieces with mounting screws

€9.50*

y1440 Team Decals Post for BMW M3 ALMS

Team decal sheet, suitable for BMW 320si body shells with the order numbers: y1437.Team decal sheet includes the following manufacturers: Deutsche Post, Hankook, Sonax, Castrol, EDGE, Zollner, Sachs, Allgeier, H&R, Exide, GNB. Dimensions:Big decal sheet: 390 x 200 mmPost logo for the roof: 210 x 145 mmM3 rear wing lettering: 250 x 36 mmStripes: 400 x 73 mm

€34.90*

y1045 hydraulic brake lining 4mm - 1 St

hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.Length: 1 meterDimensions:Inner diameter: 2 mmOuter diameter: 4 mm

€4.90*

y1044 Y-connector for hydr. brake system - 1 pce

Y-connector for all hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.

€14.90*

y1042 Angle connector 45° for hydraulic brakes - 1 pce

Angle connector for all hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.Connecting thread M5

€12.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y1340 Adjustable wing mount with wing for Losi Desert Buggy XL, DBXL-K&N

Wing mount set for the Losi Desert Buggy XL. Due to the exposed position of the rear wing on the Losi Desert Buggy and the vehicle weight this mount is designed to be extremely tough!Your choose of decal sheet with DBXL and K&N design included. The mount installs to the roll cage at four points without drilling. The wings tilt angle is adjustable to four different settings from 0° to 27°. The set includes:Ten pieces aluminum wing mount Mounting screwsOne Offroad Flex-Wing # y1099One Losi Desert Buggy wing decal

€79.90*

y1020 MadMax SUPER GRIP 170x80/x60 complete set for Traxxas X-MAXX 4x4 with adapter

Offerset:1 Pair MadMax Supergrip front tires 170x60 mm1 Pair MadMax Supergrip rear tires 170x80 mm1 Pair MadMax front rims 60 mm1 Pair MadMax rear rims 80 mm1 Pair MadMax front inlays 60 mm1 Pair MadMax rear inlays 80 mm2 Pairs / 4 pieces adapter TT1020/01SUPER GRIP 170 x 80 mm and 170 x 60 mm with black MadMax Extreme rims for 24 mm hex wheel drive, 20 beadlock screws per rim and reinforced orange beadlock rings. Fits Losi 5ive-T, 5ive Mini, Desert Buggy XL and all HPI Baja 5B and 5T/SC cars.Due to the extreme stress created by the MadMax SUPER GRIP tires, the rim has been optimized again.The tires come with a special rigid insert which transfers the applied forces without tilting; even with the heaviest cars like the Losi 5ive-T.All together, the SUPER GRIP lives up to its name and provides maximum grip, which makes it necessary to use the supplied 3 mm beadlock screws for the MadMax EXTREME rims instead of the usual 2.5 mm screws. Additionally, the seating of these screws should be checked after each use.The set consists of two each front and rear tires, including tire inserts and MadMax EXTREME rims and 4 pieces adapter wheel nuts TT1020/01.The MadMax SUPERGRIP tires have been designed especially for use on tarmac. Even on fine-pored tarmac your car will still find enough grip! (As you can see in our video.) On most 1/5 and 1/6 cars the best combination is the use of 60 mm wide front and 80 mm wide rear tires. The Losi 5ive-T Mini should run 60 mm wide MadMax SUPERGRIP tires all around, because the 80 mm wide SUPERGRIP tires are a bit too wide for the Mini body shell.The 80 mm wide MadMax tires are reinforced on the inside of the carcass with a special cross pattern in the tread section and ribs in the outside shoulder.MadMax SUPERGRIP tires are available in the following compounds: (embossed marking on the inside shoulder!)Breite:Soft:Medium:60 mm y1464/01y1464/0280 mm y1464/03y1464/04For running an rc-car on tarmac, the following recommendations apply:The dirtier the track or the colder the weather, the stickier (softer) the rear tires should be.A note for the front tires: 2WD cars should run slightly harder tires in front than in rear.On 4WD cars the same compound front and rear is usually a good choice!Of course, like in full scale motorsport it also applies to the MadMax SUPERGRIP tires that the softer the tire the higher the wear. The medium compound tire lasts significantly longer than the soft version!The MadMax SUPERGRIP has a special on-road tread. These tires have excellent grip even after eating up the tread and can be used after that for a long time as slicks!MadMax SUPERGRIP spare rubber can be found here: MadMax SUPER GRIP spare part Some off-road tires knowledge can be found here!TT1020 Top Tuning Adapter wheel nutGenuine TopTuning spare/option part.These adapter nuts, manufactured from billet 7075 aluminum allow for easy and precise installation of all MadMax, HPI and Losi tires and rims on the Traxxas X-Maxx. For the best result possible, nut and adapter are manufactured as a one-piece unit.It should be noted that the wide rims can be used on the rear axle only. On the front axle they would limit the steering angle by grinding on lower a-arm and steering rod.Traxxas has microencapsulated the wheel shafts of the X-Maxx to secure the wheel nuts. Like any thread locking compound this is not for eternity. After several tire changes the use of a normal screw locking compound is advised, we recommend it "y0113 / 01 medium strength".The dimensions of the nut are specifically designed for use with MadMax, current HPI and Losi rims. Rims from Losi 5ive have slightly different dimensions in the hub area. This is meaningless on the large LOSI or HPI wheel adapters. With the smaller and shorter wheel nut thread of the X-Maxx wheel shafts you cannot compromise. Therefore there are also special nuts for the Losi rims/wheels available at our options menu.However, somewhere in the past, the injection moulds for the HPI rims were slightly modified in the hub area. As part of that job the bore diameter has probably been slightly increased. Therefore, the use of older rims in combination with the adapter nuts makes it necessary to increase the rim bore a little bit.Due to repeated requests for use: these wheel nuts replace the stock wheel nuts when installing the wheels!Contents:4 pieces

€129.90*

This product is no longer available.

y1540 Losi Super Baja Rey / 2.0 / Rock Rey complete set of sealed bearings

Genuine rc-car-online spare/option part. Complete set of sealed (2RS) bearings for Losi Super Baja Rey / Rock Rey.4 pieces 4 x 8 x 3 mm Losi # LOS25700715 pieces 8 x 16 x 5 mm Losi # LOSA6942/016 pieces 10 x 19 x 5 mm Losi # LOS257006Price bought separately 78.56 EURSpecial-offer price for the complete set 39.90 EURContents:25 pieces of of sealed (2RS) bearings

€39.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

HT Aluminum front suspension for Carson / Smartech C5, UNO / R5, Attack, Superattack, GasBlaster and Touareg, y1047 - Set

The set includes:Item N°.Name:y1027HT Aluminum a-arm 2WD, front uppery1026HT Aluminum a-arm 2WD, front lower, one-piecey1209HT Aluminum front bulkhead A for Carson Comanche, Attack Evo, CRT 2WD + CPTy1210HT Aluminum front bulkhead B for Carson Comanche, Attack Evo, CRT 2WD + CPTy1036HT rose joints with conical spacersUnit prices: 269,00 EURPlease note: the hinge pins are not included, you will use the pins from the stock suspension!Fits on Carson 1/6 / 1:5(Attack, SuperAttack, GasBlaster and Tuareg) and Smartech UNO

€269.00*

VOLZ-Servo, y1060 - 1pce. -Special offer-

Version 220 for steering and throttle/brakeOriginal price: 266,80?Gears: Metal - Steel output shaftBearings: 2x ball bearingWeight: 72gVoltage: 6,0 VoltsTorque: 220 Ncm Speed: 0,11 s. 40ºDeflection: 2 x 45º

€179.90*

y0040 KENT hose quick couplings for all 1/5 & 1/6 cars

y0040 Variant: y0040 Coupling member A and B

The secure hose connection for engine or tank removal! Advantages of the Kent system quick couplings: A safe opening and closing with one hand, as soon as one side is fixed. The design of the "shut-off" valve is a double chamber system, which closes when disconnecting the coupling. (This design enables easy and safe opening of the quick couplings, even under high pressure. Similarly, just as in low pressure applications.) You feel a snap when connecting the couplings, preventing over-tightening or accidental opening. The actions of opening and closing the quick couplings are identical, so that the handling is extremely simple. An ergonomic design guarantees easy handling, yet the space requirement for the couplings is low. Long and safe life of the couplings even with frequent connection and disconnection. In order to protect the fully encapsulated KENT quick coupling system against dirt even after dismantling, sealing the ends with the corresponding white plugs and caps is recommended.

€16.90*

y1080/13 yellow Ford Mustang body 530/535 wheelbase, used

Original Carson/Smartech item Unfortunately the body has a crack in the rear area and is therefore sold as used. See photos, the damage can be seen in the last photo.The body mounting holes are drilled for Smartech/Carson models.Unfortunately, the pin striping lines on the body shell have not been applied very carefully and should be reworked individually, if you place value on it. The body shell is vac-formed from 2 mm Lexan.Measures:Length: 890 mmWidth: 392 mmHeight: 220 mmRequired body mounts:Mount front: FG 7020/16 Front bumperRear body mount: FG 7152/01 Rear body mountSide body mount front: FG 8013 Body mountsSide body mount rear: FG 3014 Body mounts

€29.90*

10403 FG Tuned pipe F1 - set

New developed Tuning pipe with significanty more power due to the longer manifold and bigger volume. To mount this Tuning pipe the battery 6543/1 is necessary.

€244.95*

y1080/14 gelbe Ford Mustang Karosserie 530/535 Radstand, gebraucht

Original Carson/Smartech item Unfortunately, the body has some minor damage to the paintwork and is therefore being sold as used. See photos, where the damage can be seen. The left window pane has already been cut out for better air circulation. The body mounting holes are drilled for Smartech/Carson models.Unfortunately, the pin striping lines on the body shell have not been applied very carefully and should be reworked individually, if you place value on it. The body shell is vac-formed from 2 mm Lexan.Measures:Length: 890 mmWidth: 392 mmHeight: 220 mmRequired body mounts:Mount front: FG 7020/16 Front bumperRear body mount: FG 7152/01 Rear body mountSide body mount front: FG 8013 Body mountsSide body mount rear: FG 3014 Body mounts

€29.90*

1040/09 FG Spacer small for Evo 2020-2020.2

Genuine FG spare/option part. for FG Evo 2020 und 2020.2Content:3 pieces

€16.70*

1040/08 FG Spacer large for Evo 2020-2020.2

Genuine FG spare/option part. for FG Evo 2020 and 2020.2 modelsContent:3 pieces

€27.40*

10400 FG F1 tuning pipe

For install you need FG Exhaust FG 10215.

€165.20*

32 products found for "y1040"

Filter products

rc-car-online - Home