11 products found for "y0938"
rc-car-online - Home
Genuine HT spare/option part.Each one lever inklusive M3 x 10 mm screws. Spare part for y0932.Contents:1 piece
Genuine HT spare/option part.Spare part for y0932.Contents:1 piece
Genuine FG spare/option part. Machined alloy front uprights with replaceable steering arm, accept 608 sized bearings (8 x 22 x 7 mm, stock size). Fits all FG (except 4wd models) and Carson / Smartech 2WD 1/5 and 1/6 cars.included in delivery contents:4 x M5 x mm screws8 x M3 x mm screws8 x M5 x mm washerFor installation in offroad cars you will need shorter steering rods 7028/01.Contents:2 pieces
Alloy case conversion kit for Carson Gas Devil 4x4 (Smartech Titan) only, can be used for all differentials.Comes complete as shown with sealed bearings, installed needle bearings, shims, screws and o-rings.
y0038 Viscosity:
y0038/200 - Viscosity: 200+ 1.5EUR
Genuine silicone shock absorber oil for the optimal shock absorber set-up. Content: 50 ml Please note: Factory filling of FG/Losi/Smartech and many other 1/5 and 1/6 scale shocks is done with genuine silicone shock absorber oil. To ensure seal tightness and consistency you should only use genuine silicone shock absorber oil for refilling as well.Most every rc-car shock absorber uses silicone oil of different viscosities. The smaller the number, the lower the viscosity of the silicone oil and the softer the damping. As a rule of thumb: Viscosity 100 = similar to water Viscosity 1.000 = similar to cooking oil Viscosity 5.000 = similar to shampoo Viscosity 10.000 = similar to honey As a reference: The red FG Marder / Off-Road Buggy series shock absorbers are factory filled with 2.000 viscosity oil, the shocks on monster cars with dual shock set-ups (total of 8 shocks) are filled with 1.000 viscosity oil, and the shocks on FG onroad cars come filled with 4.000 viscosity oil. The original filling of the Losi 5ive-T is 350cc silicone oil.FG Silicone oil with 50 ml:FG Item N° 6510/010 = Viscosity: 100FG Item N° 6510/025 = Viscosity: 250FG Item N° 6510/035 = Viscosity: 350FG Item N° 6510/050 = Viscosity: 500FG Item N° 6510/075 = Viscosity: 750FG Item N° 6510/100 = Viscosity: 1000FG Item N° 6510/150 = Viscosity: 1500FG Item N° 6510/200 = Viscosity: 2000FG Item N° 6510/300 = Viscosity: 3000FG Item N° 6510/400 = Viscosity: 4000FG Item N° 6510/500 = Viscosity: 5000FG Item N° 6510/600 = Viscosity: 6000FG Item N° 6510/700 = Viscosity: 7000FG Item N° 6510/800 = Viscosity: 8000FG Item N° 6510/900 = Viscosity: 9000FG Item N° 6511 = Viscosity: 10000Viscosity of silicone oil at various temperatures.
Content: 50 Milliliter (€209.00* / 1000 Milliliter)
Variants from €8.95*
y0908_04_021 Version:
y0908/021 23 cm³ Rebuilt kit original Losi
Cylinder-piston repair kit for 23 cm³ or 26 cm³ Losi 5ive-T engine. The set includes the following parts:Cylinderpistonpiston ringcylinder foot gasketpiston pin clipPlease note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer
%
This two disc DVD set of the World Championship in Brisbane / Australia in 2007, made by Chris Wright from the well known Rev-Up racing magazine.The 2007 Worlds in Brisbane, Australia finished less than a month ago and Chris Wright has worked hard to get these DVD?s out to you. Have a look at the trailer, but altogether you get 17 videos plus on the second DVD in the EXTRAS directory you will find the full race results in html so you can surf the whole event in your browser. Not content with that also in the extras directory are all the still pictures taken. There are a few hundred pictures here and if your car is not there then it was not through want of trying on our part. These pictures can be printed or used as wallpaper on your computer or even your phone. Titles like 30 minutes of glorious slow motion, the full final with commentary, opening concourse, a view of Brisbane some of it from the air, the two prize presentations - on the track and at the Banquet, lots of other videos as you would expect and a bonus video of our day at Steve Urwin's amazing wildlife park, stroking crocodiles, cuddling Koalas and a Tiger that wanted to like the camera lens, Crikey! It is all there.The DVD?s are in PAL so if you have a TV region in NTSC then you will need to play them on your computer. As the original files started life as high definition and if you play them on a DVD player that upscale?s through HDMI or Component leads, then you will see an improvement in the video quality. Not HD but possibly middle of the road.Trailer:
Genuine HT spare/option part. Nitrited steel spur gear, profile regraded, for combination with the stock 43T spur gear which goes on the clutch bell. This gives a numerically lower drive ratio and makes it possible to use standard diameter buggy tires on this car!Attention: The speedgear has the same diameter as the stock 37T gear and is therefore not compatible with the other 37T/40T HT tuning gears!Speedgear 34T: I=7,74Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn´t really matter.Contents:1 piece
%
This two disc DVD set of the World Championship in Brisbane / Australia in 2007, made by Chris Wright from the well known Rev-Up racing magazine.The 2007 Worlds in Brisbane, Australia finished less than a month ago and Chris Wright has worked hard to get these DVD?s out to you. Have a look at the trailer, but altogether you get 17 videos plus on the second DVD in the EXTRAS directory you will find the full race results in html so you can surf the whole event in your browser. Not content with that also in the extras directory are all the still pictures taken. There are a few hundred pictures here and if your car is not there then it was not through want of trying on our part. These pictures can be printed or used as wallpaper on your computer or even your phone. Titles like 30 minutes of glorious slow motion, the full final with commentary, opening concourse, a view of Brisbane some of it from the air, the two prize presentations - on the track and at the Banquet, lots of other videos as you would expect and a bonus video of our day at Steve Urwin's amazing wildlife park, stroking crocodiles, cuddling Koalas and a Tiger that wanted to like the camera lens, Crikey! It is all there.The DVD?s are in PAL so if you have a TV region in NTSC then you will need to play them on your computer. As the original files started life as high definition and if you play them on a DVD player that upscale?s through HDMI or Component leads, then you will see an improvement in the video quality. Not HD but possibly middle of the road.Trailer:This will be for the moment on Blu Ray DVD discs as Toshiba have yet (after ten months) to release their HD DVD Burner drive. I have tried a few authoring programs and as it is early days they all have their problems so the easy way is to provide the original files for people to select and play. These discs ?may? work in ?some? set top players but as Sony has just upgraded the firmware on set top boxes if yours cannot be updated then you may not be able to play them. However, as the vast majority of Blu Ray players are the much cheaper PlayStation3 (which is even cheaper now the 40 gig cut down version has just been released) these discs will play in all versions. So provided you are feeding your PS3 through an HDMI interface to as a minimum HD ready TV or better still a Full 1080P TV (these files are rendered in 1080P ) you will get the WOW factor. There is a read-me file on the DVD explaining all this.What do you need to get the most out of it? You have to have a desktop/laptop that is connected to a High Def Screen or Monitor of 1920 x 1080 resolution. We also assume you have the processing power of the fastest single Pentium or a Dual Core processor (Intel or AMD), ram of 1 gig + and at least a DirectX 9 or even DirectX10 graphic card with at least 256 meg of dedicated memory on it. You also need a Blu-Ray player or read/writer (The LG one is the cheapest). Assuming under Windows XP you have Service Pack 2 installed then you should be on Windows Media 10. Under Vista you must have at least the Home Premium version or higher installed and this will give you the latest Direct X 10 drivers and Windows Media 11. Your first job is to run the NEO Player provided free on this disc. This installs the free High Definition codec in order that Win Media players these files in the correct way or Power DVD if you are using this popular player. (There is a ?read me? file on the Blu-Ray disc explaining this).Of course if you also have a DVI or HDMI 1.2 or 1.3 interface off your computer then connect it to your High Def TV and get that WOW! experience.
Genuine HT spare/option part. Front upper a-arms, replaceable plastic bushings, l/h ad r/h version available. Contents:2 pieces
Genuine ARRMA spare/option part. Contents:1 pieces