11 products found for "y0757"

rc-car-online - Home

y0757 Special exhaust manifold screw set, 5 pcs.

Cap screws for 1/5 & 1/6 large scale cars, DIN 912 - 8.8 M5x16 with corresponding external tooth lock washers DIN 679A.The lock washers prevent loosening of the manifold screws.Bag with five each screws and lock washers.Part is delivered in silver or black color from vendor!

€3.90*

y0753 Servo mount adapter

Genuine HT spare/option part. This machined aluminum servo adapter allows easy installation of servos with a 69 x 18 mm mounting bolt pattern (for example Orange-Power, S8203) in vehicles / radio plates which provide a 75 x 18 mm mounting bolt pattern (for example Losi 5ive-T, Mini WRC, HPI Baja 5 series cars, many FG cars).The use of this adapter servo will neither tilt the servo, nor does it change installation height. Scope of delivery:1 x Servo mount adapter2 x Socket head cap screws 3 x 20 mm2 x Socket head cap screws 3 x 12 mm2 x Shim ring 3,2 mmContents:1 piece

€9.90*

y0057 Ball & socket tool for Losi and HPI

Genuine HT spare/option part. Ball & socket tool with t-handle, special version for the ball joints.Fits Losi 5ive-T. 5ive-B, Desert Buggy XL, Desert Buggy XL-E, Monster Truck XL and the HPI Baja 5B and Baja 5R Ford Mustang.Contents:1 piece

€17.90*

y0758 Special exhaust manifold screw set, 5 pcs.

Cap screws for 1/5 & 1/6 large scale cars, DIN 912 - 8.8 M5x16 with corresponding spring washers DIN 127.The spring washer's tension prevents loosening of the manifold screws.Bag with five each screws and spring washers.Part is delivered in silver or black color from vendor!

€3.90*

y0957 HT-Alloy steering centerlink for Gas/Hell Devil/Thunderbolt / Smartech Titan

Genuine HT spare/option part. Steering centerlink, very strong, does not bend.The stock high socket ball / M3 bolt will be replaced with a standard unit / M4 bolt without the unnecessary leverage.Standard plastic bushings and a spacer (used as an axle) replace the expensive proprietary bolts and bushings from the stock part. Rebuilding the bearings becomes cheap and easy with this centerlink.All parts included.Contents:1 piece

€34.90*

y0797 SPEED TEC EXPERT Zenoah 30,5 cm³ tuning engine

The SPEED TEC EXPERT genuine Zenoah 30,5 cm³ engine is optimized for performance with sophisticated craftsmanship and guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC EXPERT version modifications: Cylinder: Adjustment of compression; enlarged ports, fuel management milled, machined and polished exhaust and intake. Piston: weight reduced; skirt shortened; oil rings, piston above and below piston ring tapered and piston dome ground. Crankshaft: The Zenoah 30,5 cm³ SPEED TEC Expert comes with the genuine Zenoah +2 mm stroker crank #577953101. It is adjusted, aligned and balanced. Flywheel: weight reduced and checked for runout. Gaskets: use of premium quality gaskets.To achieve the optimum performance gain of a SPEED TEC EXPERT engine, we recommend the use of a tuned pipe ( to the tuned pipes ).

€699.00*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y0557 Zenoah G230RC with Walbro carburetor WT 603B

23 cc Zenoah engine for large scale cars!The engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch and / or ball beard carburetor are optionally available at additional charge.Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise. Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.

€264.90*

Bergyogi DVD No sleep in Lostallo, y0857

Double-DVD set with commentaries in English language. This video covers the IFMAR World Championship Warm Up Race (May 2005) in Lostallo/ Switzerland. All top drivers likeCollari, Feldmann, Oddie and many more make this race some kind of a pre-world-championship(DVD-video, system: PAL, region code free, total run time: approx.. 200 minutes, sound: MPEG-stereo, aspect ratio: 4:3)

€13.85* €27.70* (50% saved)

y0751 K&N Filter cleaner 946 ml

Genuine K&N spare/option part. K&N Power Kleen is a high-performance cleaner and degreaser used to remove road grime, engine exhaust and grease from cotton air filters. It is now formulated to clean those troublesome and demanding cleaning jobs. This cleaner is specially formulated to remove oil, lubricants, grease, grime, and other deposits from most surfaces including cotton air filters, painted surfaces, chrome, plastic and more! Genuine K&N air filter cleaner,especially formulated for cleaning cotton air cleaners.Content:946 ml / 32 OZ

Content: 946 Milliliter (€16.17* / 1000 Milliliter)

€15.30*

y0657 Receiver battery packs standard size, NiMh, 4500 mAh

y0657 Connector: y0657/02 BEC-connector

Genuine HT spare/option part. 5 cells, 6 volt, cell size Sub-C. More applications on request.Dimensions: approx 112 x 46 x 23 mmContents:1 piece

€44.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y0750/03 Rubber grommets with inserts for Orange Power and S8203 servo, set

Item N° y0750/03 Rubber grommets with inserts for Orange Power and S8203 servo, setFits Orange Power and S8203 servos.It is also absolutely mandatory to use the rubber grommets along with the brass bushing inserts for installation.Content:Rubber grommets: 4 pcs.Brass insert: 4 pcs.

€5.90*

11 products found for "y0757"

Filter products

rc-car-online - Home