16 products found for "y0482"

rc-car-online - Home

y0082 Plug connector repair kit incl. shield, 1 pc.

Original Zenoah article X374320099 1 piece

€14.90*

y0482 Anti-vibration spring hose elbow Samba, 2 pcs.

Protects against vibration and dirt which could jeopardize the spring. The spring is not protected by the rubber tube only, but also relieved.product contents: 2 pcs.

€3.90*

y0487 Air filter adapter for Solo engines, 1 St.

With this adapter you get all the major solo air boxes mounted on her solo motor.

€9.90*

y0442 HT rim reinforcement all FG-Monster and Stadium rims

Genuine HT spare/option part.Rim reinforcement, transfers the load over a larger diameter into the rim and protects the rim's square. Will also allow for the use of rims with an already damaged square.For FG Monster- and Stadium rims 6232, 6232/01, 6232/03, 6232/04, 6232/05 and 6232/06.14 mm wide square drives must be used.Please note:When installed with new (unused) rims, it may be necessary to modify the rim's square slightly.Contents:2 pieces

€29.90*

y0462 Ceramic - Hybrid bearings for FG 4WD tensioning pulley, 1 pcs.

Single spare parts to replacement number: y0460Ceramic ball bearings suitable for the aluminum and plastic shaft bearings of the clamping roller in the back tension roller housing for all 4WD models FGDimensions: 10 x 19 x 7 mm

€29.90*

y0488 mf-RaceLine Cask shaped springs, green 2,5 mm, 2 pcs.

The famous cask shaped spring by Markus Feldmann. Especially designed for rear suspension applications.Fits all touring car shock absorbers with an outer diameter of 16 mm.Caution: Not suitable for MecaTech Klick shocks.Dimensions:Height: 52 mmCenter diameter (outside): 30 mmInner diameter (top/bottom): 16 mmCable thickness: 2,5 mm

€17.90*

y0452 HT Cask shaped springs for Mecatech Klick-Shocks und Big Bore, white 2,4 mm

These cask shaped springs are especially designed to fit the diameters of Mecatech Klick-Shocks and Mecatech Big Bore shocks.Dimensions:Inner diameter, upper: 20,5 mmInner diameter, lower: 16,5 mmOutside diameter: 29,5 mmLength: 52,5 mmWire diameter: 2,4 mm

€17.90*

y0472 Piston pin for 29 / 30,5 cm³ big bore kit, 1 pce

Spare part for the 29 / 30.5 cm³ big bore kit y0466

€7.90*

y0882 Metal ball joints set

y0882 Version: y0882/01 Steel version

Aluminum or steel balljoints for replacement of the stock plastic units on the a-arms of all FG cars except Formula 1. Alloy:A = 5 mmB = M8C = 8 mmD = 17,5 mmE = 39 mmSteel:A = 5 mmB = M8C = 8 mmD = 16 mmE = 37,5 mmContent:8 x Aluminum or Steel balljoints, M8 r/h thread, 5mm bore diameter in the ball8 x low height nut, M8 r/h thread 16 x conical alloy spacer

€49.90*

y0481 Various Zenoah Label, 1 St.

y0481 y0481 Diverse Zenoah Label, 1 St.: y0481/02 G240RC Zenoah Label

Glossy Zenoah stickers.

€4.90*

y0428 Extension cable universal180/300 mm

y0428 Length: y0428/01 - 180 mm

In case the servo cable is not long enough.Two selectable lengths:y0428/01 - 180 mmy0428/02 - 300 mm

€5.90*

y0782 Electrogalvanized M8 steel turnbuckles - all lengths, 2 pcs.

gewinde_0005 Length: 7076/01 54 mm+ 2EUR

Electrogalvanized M8 steel turnbuckles right/left available in different lengths.Order no.Length:6100/03M8 left/right36 mm6100/04M8 left/right40 mm7076/01M8 left/right54 mm6076/01M8 left/right61 mmy0988M8 left/right75 mmThe 75 mm version is especially for installation of HT upper rear alloy a-arms in Carson Comanche, Attack Evo, CRT + CPT cars.

Variants from €9.90*

€11.90*

y0682 High tech mechanics gloves, nitrile, black, 2 pcs.

y0682 Size: 10 / approx 27 cm

y0682High tech mechanics gloves, nitrile, black, 2 pcs.With non-slip surface perfect for delicate work, actually improving dexterity and grip.Available sizes: 9 and 10 glove size? u> b>Measure the circumference of your hand without the thumb and at the widest point (above the ankle).The tape measure should embrace the hand loosely.- Size 9 = 24 cm circumference- Size 10 = 27 cm circumferenceNorm EN388Lining 100% polyamidePackage contents: 1 pair / 2 pieces- partially coated with hightech nitrile - fits like a second skin- grips even when wet- good touch sensitivity- liquid-repellent- good resistance against oil and grease

€8.90*

y1482 Spring band clamps for tuned pipe connectors, 22 to 34 mm diameter range

y1482 Size / piece: y1482/06-5 Spring band clamps 27 - 29 mm+ 4.5EUR

Genuine HT spare/option part.Spring band clamps are self-clamping and can self-adjust to diameter changes due to temperature variations or properties of the tube material.With this feature of self-adjustment, spring band clams are ideally suited for hose connections between exhaust manifold and tuned pipe with their high temperature load.Unlike worm drive clamps with their relatively large adjustment range, spring band clamps must be selected closely related to their intended application. For this purpose, the outer diameter of the hose in the mounted state must be measured. The clamp, whose nominal diameter corresponds most accurately to the value determined, should be used.In the options menu you can select from sizes ranging from 22 to 34 mm and packs of one or five clamps.Contents:1 piece / 5 pieces

Variants from €0.99*

€5.49*

10482/03 FG CFK side parts for rear spoiler F1 - 2pcs.

Spare part for .

€93.95*

ARA320482 ARRMA Aluminum Motor Mount red for Kraton / Outcast 8S

Genuine ARRMA spare/option part. Contents:1 pieces

€49.99*

16 products found for "y0482"

Filter products

rc-car-online - Home