R250 Monster tires, 230 mm, with Kevlar belt reinforcement, incl. rims with 24 mm hex drive (LOSI/HPI)

€149.90*

Available

Product number: ufrc_r250

EAN: 4058575138952

Product information "R250 Monster tires, 230 mm, with Kevlar belt reinforcement, incl. rims with 24 mm hex drive (LOSI/HPI)"

Genuine UFRC spare/option part.

Original equipment tires of the Ghost Rabbit GR1.
Fits Losi MTXL as well.
When using our special wheel nuts TT1020/02 these tires can also be mounted on the Traxxas X-Maxx.

Tire with vulcanized Kevlar belt, speed resistant (no ballooning) and yet flexible.
Rim with steel hex insert.
Diameter 230 mm, width 100 mm, 24 mm hex wheel drive.
Rim thickness at center hole: 8.75 mm.
Hex depth: 8 mm.
Weight: approx. 2160 grams/pair

On the Losi DBXL running these wheels requires the installation of the DBXL024 ATOP axle extenders!

Contents:

2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

y1407/01 MadMax CROSS BOND 170x80/x60 tires for HPI + Losi (24 mm hex drive)

CROSS BOND 170 x 80 mm and 170 x 60 mm tires with black MadMax Extreme 20 bolt-beadlock rims with 24 mm hex drive and reinforced beadlock rings were designed for use on loose surfaces. The extremely rigid and differently structured lugs of the CROSS BOND ensure optimum power transmission and also allow for excellent grip on loose surfaces, such as sand and soil. The lugs are raised at the treads outside, and therefore provide maximum grip, particularly when cornering where the tire is canted to the outside. Due to the extreme load created by the MadMax CROSS BOND tires the rim was optimized again with a reinforcement ring.The tires are fitted with a special rigid insert, which can handle the cornering forces and maintain the tires shape even on heavy cars. We recommend to check the beadlock screws after the run. Dimensions:Outer diameter: 170 mmFront tire width: 60 mmRear tire width: 80 mmReinforced 24 mm hex driveThe video shows the 18 mm square drive version. Also available with 24 mm hex. Some off-road tires knowledge can be found here!

€119.90*

Configure now

ARA550089 ARRMA dBoots Copperhead2 Mt Tire Set Kraton 8S EXB

Genuine ARRMA spare/option part. This dBoots COPPERHEAD2 MT tire set will plough through rough terrain on a wide range of surfaces. With bigger tread blocks, a thicker carcass, a bigger overall diameter and added internal ribbing compared to the SB version, these heavy-duty tires offer increased durability when the action gets wildFeaturesTires: Aggressive tread pattern for excellent traction on all off-road surfaces - Big tread blocks - Thick carcass - Extra internal ribbing - Durable material compound for long-lasting performance - Pre-glued for trouble-free fit and servicingWheels: Multi-spoke design for stylish looks and increased strength - Tough nylon for durability on all surfaces - Black color for head-turning ARRMA styling - Steel reinforced 24mm Hex for strength during extreme driving action and easy servicingFoam Inserts: High-quality foam with excellent support for the tire tread - Specially designed to give the perfect balance of aggressive grip and easy handling characteristicsTECHNICAL INFORMATION:Wheel bead diameter: 4.8" (122mm)Width: 4.17" (106mm)Wheel hex size: 24mmOverall diameter: 8.31" (211mm)Contents:1 Pair / 2 pieces

From €94.99*

Details

GW91-S1 GRP offroad tyre 1:6 soft 180mm glued on disc rim 24mm 6kt

1 pair of GRP offroad tyres soft, glued on GRP disc rim white with 24 mm hex. - Diameter 180 mm - width 70 mm Profile see photos.

€59.90*

GW91-P1 GRP offroad tyre 1:6 soft 180mm glued on disc rim 24mm 6kt

1 pair of GRP offroad tyres soft, glued on GRP disc rim white with 24 mm hex. - Diameter 180 mm - width 70 mm Profile see photos.

€59.90*

GW90-P3 GRP offroad tyre 1:6 medium 180mm glued on disc rim 24mm 6kt

1 pair of GRP offroad tyres medium, glued on GRP disc rim white with 24 mm hex. - Diameter 180 mm - width 70 mm Profile see photos.

€59.90*

GW91-S5 GRP offroad tyre 1:6 hard 180mm glued on disc rim 24mm 6kt

1 pair of GRP offroad tyres hard, glued on GRP disc rim white with 24 mm hex. - Diameter 180 mm - width 70 mm Profile see photos.

€59.90*

GW91-P3 GRP offroad tyre 1:6 medium 180mm glued on disc rim 24mm 6kt

1 pair of GRP offroad tyres medium, glued on GRP disc rim white with 24 mm hex. - Diameter 180 mm - width 70 mm Profile see photos.

€59.90*

LOS45004 Losi DBXL 1:5 4WD tyre set, 1 pair mounted

Produkt EigenschaftenFahrzeugtypBuggyFelgenpositionVorne/HintenMaßstab1:5PakettypVormontiertReifen Innen / Felgen Aussendurchmesser4.75 Zoll

€119.99*

LOS 45004/01 Losi DBXL 1:5 4WD tyres (2x tyres right)

Original Losi tyres mounted on rims with 24mm hexagon. The tyres are new. Attention !, 2 right tyres ! They are therefore sold cheaper. However, this has no major negative influence on the driving characteristics.

€89.90*

ARA550061 Dboots Copperhead2 SB MT Tire Set Glued

Genuine ARRMA spare/option part. Tires: Multi-surface chunky tread pattern for awesome traction in all conditions - High-quality rubber for long-lasting durability - Pre-glued for trouble-free fit and servicingWheels: Multi-spoke design for stylish looks and increased strength - Tough nylon for durability on all surfaces - Black color for head-turning ARRMA styling - Steel reinforced 24mm Hex for strength during extreme driving action and easy servicingFoam Inserts: High-quality foam with excellent support for the tire tread - Specially designed to give the perfect balance of aggressive grip and easy handling characteristicsTECHNICAL INFORMATION: Wheel bead diameter: 4.9" (124mm) Width: 3.98" (101mm) Wheel hex size: 24mm Overall diameter: 8" (203mm) Contents:1 pair / 2 pieces

€89.99*

B501 Carson Dirt Tire front for Wild GP Attack

Genuine Carson spare/option part. Contents:2 pieces / 1 pair

€69.90*

ARA550064 ARRMA dBoots BACKFLIP Tire Set Glued for Outcast 8S

Genuine ARRMA spare/option part. Contents:2 pieces

€89.99*

Customers also viewed

y1614 MadMax Monster LAND G-RIPPER 211x104 for HPI+Losi & Co. (24 mm hex)

MadMax Monster tire LAND G-RIPPER 211x104 The off-road tire combination for extreme terrain use and "RC-car show use"! Glued on rims with 24 mm hex drive and reinforcement ring, suitable for Losi/HPI/Arrma/Traxxas/Carson1/5 series cars Dimensions: 211 mm outer diameter 104 mm width 875 grams weight Please note: Since the MadMax Monster LAND G-RIPPER tires give a very good grip, the rim and bonding are extremely stressed.Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Here you can find the other tire sets shown in the picture: ARRMA ARA550061 Losi LOS45017/S Carson B501

From €109.90* €129.90* (15.4% saved)

Details

HURRAX extreme Race tires + HR0014 Hurrax-Modular Race rim 24mm hex set, glued

hurrax_racereifen_verklebt_modular Version: HX0400 extreme grip Soft (blue mark) 175/70 mm

HURRAX extreme Race tire and insert 175x70 mm HURRAX extreme is one of the most successful tire in large scale off-road racing and specifically designed for astro turf and solid ground. With more than 700 (!) differently designed, closely spaced lugs and the 70 mm wide tread it is reasonably wear resistant and provides optimal grip with good side traction. If this - i.e. on the front axle - is not desired, you may cut the lugs at the tires outer edge to reduce cornering grip. This can be easily done with a small side cutter or strong nail scissors. In order to reduce the edging in the tire on the front axle.This makes a tire less aggressive during cornering and changes the cars behavior towards understeer. It becomes depending on the track conditions (i.e. wet!) a lot more drivable.An optimal vehicle setup can often be achieved by running already used HURRAX extreme tires on the front and new ones on the rear axle.This is especially true for 2WD models. Dimensions:External diameter approx. 175 mmInner diameter approx. 130 mmWidth approx. 70 mmWeight: one glued tire on Hurrax rim: 380 grams HURRAX extreme tires are available in soft (blue marker!) and medium through our shop menu.Genuine Hurrax spare/option part.HURRAX Modular competition rim 130 x 62 mm with 24 mm hex drive and reinforcement ring.Extremely strong and lightweight at only 162 grams, they're especially designed for competition use.This premium rim can handle even most heavy weight large scale cars like Losi 5ive-T, Losi Monster Truck XL and Losi Mini WRC.Contents:2 pieces

€59.90*

y1320 Narrow-Grip 616 type drift tires, mounted and with 24 mm hex for Losi, HPI, MCD

The off-road tire for hard packed dirt and spectacular drifts!Gives great results on those carpets which are typical for some off-road tracks. 616 grippy square studs per tire, a total of more then 2.400 for a complete set of tires, guarantee maximum traction! The lower profile of the outer stud rows reduces lateral traction and guarantee exceptional directional stability and allows for spectacular drifts! Therefore the car is less prone to undesirable side rolls!The Narrow-Grip 616 tires are mounted on a flexible 10 spoke rim with steel ring reinforced 24 mm hex drive. 10 screws per beadlock ring keep the tires in place. The Narrow-Grip 616 tires feature a firm foam insert, making them suitable even for heavier weight cars.To prevent premature wheel drive wear the fit to the rim is very tight. Therefore the rim should be properly aligned with the hex drive and completely mounted via tightening the wheel nut! Attention: When using the Narrow-Grip wheels on a Super Losi Rock-Rey model, special wheel hexes are required. Also on FG and Carson models. For mounting on a Traxxas X-MAXX you need a set of special Top-Tuning wheel nuts. - TT1040 Top Tuning wheel hub 24mm/6-edge for Losi Super BajaRey/2.0 and Super Rock Rey for plastic axle stubs. - AT-004 Atop wheel nuts 4 pieces Dimensions:Outer tire diameter: 180 mmTire and rim width: 60 mmRim inner diameter: 120 mmWeight for one tire: 430 grams / for a pair: 860 grams24 mm hex for Losi 5IVE-T, HPI Baja 5, MCD Wheels drives:24 mm hex for Losi 5IVE-T, HPI Baja 5 and MCD ccars.

€77.80*

GW91-S1 GRP offroad tyre 1:6 soft 180mm glued on disc rim 24mm 6kt

1 pair of GRP offroad tyres soft, glued on GRP disc rim white with 24 mm hex. - Diameter 180 mm - width 70 mm Profile see photos.

€59.90*

6228/07, FG Monster Truck tires M/ glued, 2 pcs.

These Monster tires have a bigger square depth, this reduces a cylindrical turning of the square wheel significantly. To mount these tires you need a 18 mm wide square wheel driver. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Durchmesser x Breite / diameter x width 210 x 115 mmAlso suitable for:With the following wheel adapter: y1183 Rim adapter

€89.95*

Details

6229/07 FG Monster Truck tires H, glued, 2 pcs.

Rim with 18 mm square drive. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.1/6 monster truck tires, hard, glued on chromed FG Monstervrim. Outer Ø 210mm, width 120mm, fits FG Marder, Off-Road Buggy, Beetle and Monster cars. Fits other makes of 1/6 cars as well, wheel square size must be checked prior to installation. Installation of tires with a different diameter may require a change in gear ratio as well.Also suitable for:With the following wheel adapter: y1183 Rim adapter

€115.95*