150 products found for "pureten_mk1_clear"

rc-car-online - Home

Tamiya spray paint PS-62 Pure Orange (ENEOS)

TAMIYA PS = Polycarbonate spray paints are specially developed for painting unpainted kit body shells. Numerous colour shades are available and allow the individual design of models. Each can contains 100 ml of highly opaque paint, which is oil and fuel resistant, allowing the use on nitro models.The body shell should be degreased and cleaned before use. Best painting results are achieved when thin layers of paint are sprayed on from a distance of approx. 30 cm. Between two spraying processes the paint should dry slightly to avoid "tears".Always follow the painting instructions of models and on the can. Danger warnings: H222 Extremely flammable aerosol. H229 Container is under pressure: may burst when heated. H315 Causes skin irritation. H318 Causes severe eye damage. H335 May cause respiratory irritation. H336 May cause drowsiness and dizziness. EUH066 Repeated exposure may cause skin dryness or cracking. Content: 100 ml spray can with spray headPainting tips:

Content: 100 Milliliter (€111.90* / 1000 Milliliter)

€11.19*

8191 FG Main part BMW M4 DTM clear

Genuine FG spare/option part. Contents:1 piece

€157.50*

9439/30 FG Brake line clear 1 m

Original FG Ersatz-/Tuningteil.Measures:Outer diameter: 4 mmInner diameter: 2 mmContents:1 piece / 1 meter

€9.50*

y0523 Special cleaner for foam air filters, 500 ml

Genuine rc-car-online spare/option part. Foam-Cleaner, special cleaning agent for foam air filter elements and GPM coverThe foam-Cleaner is specially designed for RC foam air filters, as well as covers for starter, filter and shocks. Removes reliably dirt, mud, dust, old filter oil, and sand particles and ensures optimum air flow. After cleaning please oil the air filter with air filter oil with order-no. y0284 for foam filters before re-use. Routinely cleaning of filters protects against premature wear and extends engine life!Use: apply cleaner to filter/cover, wait for some minutes and rinse with warm water. Let the parts dry before re-use.Bottle with 500 ml.Contents:1 piece

Content: 500 Milliliter (€19.90* / 1000 Milliliter)

€9.95*

4149 FG Audi A4 DTM body shell clear 2 mm

Genuine FG spare/option part. Unpainted body shell, fits chassis with 535 mm wheelbase, standard touring car width. Set rear wing included. The body shell is vac-formed from 2 mm Lexan.The flaps will be optionally delivered. The body is not drilled and fits all fabricate.Set includes 2mm front and main body sections and rear wing set. Required body mounts:Mount front: Rear body mount: Side body mount front: Side body mount rear: Measures:Length: 935 mmWidth: 392 mmHeigth: 240 mmWheelbase: 530 mmContents:1 piecePainting tips:

€249.90*

Elcon Cleon rear wing, clear

Genuine Elcon Cleon rear wing, clear.Painting tips:

€19.90*

4171 FG Front body Audi R8 clear

Genuine FG spare/option part. Contents:1 piece

€63.30*

y1438 Front section BMW M3 Superstars, clear

y1438 Thickness: y1438/02 - 1,00 mm version

Spare part for y1437 BMW M3 Superstar body shell.Available material thicknesses:1.0 mm2.0 mmPainting tips:

€32.95*

04.0169 INNOTEC Power Clean metal and especially aluminum cleaner, 500 ml can

Special cleaner for aluminumPower Clean is a safe, fast-acting cleaner/degreaser for almost all types of contaminated metal parts and surfaces. The product removes brake dust, tar, undercoating, grease and various waxes and any type of contamination. Power Clean is a non-hazardous cleaner for electronic brake and ABS systems. Since the product does not attack the substrate, it is also particularly suitable for removing tar splashes and grease and oil stains.Power Clean evaporates completely without leaving any residue. Another major advantage is that the product does not cause white efflorescence on aluminum parts, as is the case with most brake cleaners. Thus, Power Clean is the perfect product for cleaning clutch and engine parts. The product comes out of the spray can at high pressure, making it easy to clean hard-to-reach places. In the spray can, Power Clean is particularly user-friendly and practical to use. Highlights .  span> harmless to aluminum. div>  span> High spray pressure, therefore suitable for heavily accessible places. div>  span> leaves no residues Content base: aliphatic hydrocarbons Density: 733 kg / m³ Consistency: liquid (firefitted in the aerosol can) viscosity: 2 mPa.s li> solvent: aliphatic hydrocarbons Flash point: 0 ° C Evaporation Residue: Maximum 4% Processing conditions: + 10 ° C to + 30 ° C SURFACES.Almost all types of metal, paints and plastics. Before use on plastics and paints, always test on an inconspicuous area. USAGESpray product on the parts to be cleaned and leave to act briefly. Re-spray to completely remove loosened dirt. Hand cleaning: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water Shelf life: 2 years in unopened original packaging Storage conditions: Store in a cool, dry place Batch code type: F

Content: 500 Milliliter (€19.80* / 1000 Milliliter)

€9.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Tamiya spray paint PS-55 flat clear

This paint will be applied to the outside of the body shell to get the flat appearance.TAMIYA PS = Polycarbonate spray paints are specially developed for painting unpainted kit body shells. Numerous colour shades are available and allow the individual design of models. Each can contains 100 ml of highly opaque paint, which is oil and fuel resistant, allowing the use on nitro models.The body shell should be degreased and cleaned before use. Best painting results are achieved when thin layers of paint are sprayed on from a distance of approx. 30 cm. Between two spraying processes the paint should dry slightly to avoid "tears".Always follow the painting instructions of models and on the can. Danger warnings: H222 Extremely flammable aerosol. H229 Container is under pressure: may burst when heated. H315 Causes skin irritation. H318 Causes severe eye damage. H335 May cause respiratory irritation. H336 May cause drowsiness and dizziness. EUH066 Repeated exposure may cause skin dryness or cracking. Content: 100 ml spray can with spray headPainting tips:

Content: 100 Milliliter (€115.50* / 1000 Milliliter)

€11.55*

LOSB 8102 Cab Body Section 5T clear, 1 pce.

You will need polycarbonate paint (sold separately) for the paint job when you select the clear version: Tamiya Sprühfarbe - 1St. Painting tips:

€129.99*

5190 Porsche 911 body shell, Wheelbase 530 mm, clear

Fits on all standard width touring car chassis' with 530 mm wheelbase, FG, Carson C5 chassis and most other 1/5 touring cars with the same wheelbase. The body shell is vac-formed from 2 mm Lexan. Replacement parts: 5192 FG Front Porsche 911 GTR3 R clear 5193 FG Rear Wing Porsche 911 GTR3 R clear Required body mounts:Mount front: FG 8418 Front bumperRear body mount: FG 7152/01 Rear body mountSide body mount front: FG 3014 Body mountsSide body mount rear: FG 3014 Body mountsDimensions:Length: 940 mmWidth: 415 mmHeight: 230 mmWheelbase: 530 mm Painting tips:

€219.95*

36150 FG Body Monster-/ Stadium-Hummer H2 4WD clear, 1 pce.

Clear Hummer H2 body fits for Monster / Stadium Trucks.Length 660 mmWidth 290 mmHeight 195 mmWheelbase 460 mmPainting tips:

€59.90*

Details

Tamiya spray paint PS-58 pearl clear

Content: 100 Milliliter (€135.50* / 1000 Milliliter)

€13.55*

86927 HPI O-rings P6 6 x 2 mm, clear

Genuine HPI spare/option part. Contents:12 pieces

€7.90*

4159 FG Audi RS5 DTM clear

Genuine FG spare/option part. Audi RS5 DTM clear body shell for 1/5 cars with 530/535 mm wheelbase.The set includes main section and front air dam as well as the required special screws.The body shell does not come with drilled mounting holes to make it possible to fit any 1/5 car with 530/535 mm wheelbase.Rear wing, side flaps/winglets and several decal sets are available from the options menu.The front section is also available separately as a spare part with part number y1441/01.This Audi RS5 DTM body shell is also available fully painted with either Team Audi Ultra (y1441/06) or Team Jägermeister (y1441/07) design.Required body mounts:Mount front: FG 7020/14 Front bumper Rear body mount: FG 7152/01 Rear body mount Side body mount front: FG 3014 Body mounts Side body mount rear: FG 3014 Body mounts / for 4WD: FG 7014/02 Body mountContents:1 set

€264.95*

LOS350003 Losi Front Hood, Clear, Super Baja Rey

Genuine Losi spare/option part. Contents:1 pieces

€59.99*

LOS250018 Losi Body Set w/sticker sheet, Clear, DBXL/DBXL-E

Genuine Losi spare/option part. Also painted available: LOS250010 Painted body shell Losi Desert Buggy XL K&N LOS250016 Body Set, Screened, black, DBXL-E LOS250017 Body Set, Screened, grey, DBXL-EContents:1 setPainting tips:

€169.99*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y0738/02 Bugatti EB 110 1/5 body shell Wheelbase 530/535 , clear

The legendary sports car Bugatti EB 110 body shell for 1:5 on-road cars with standard chassis width and 530/535 mm wheelbase. The body shell is vac-formed from 2 mm Lexan.Dimensions:Total length approx. 870 mmTotal width approx. 380/385 mmTotal height approx. 220 mmRequired body mounts:Mount front: FG 7020/14 Front bumper Rear body mount: FG 7154/01 Rear body mount Side body mount front: FG 8013 Body mounts Side body mount rear: FG 3014 Body mounts The body support FG 7154/01 is screwed directly onto the rear bridge. For attachment to the rear bridge, 2 holes 4 mm must be drilled in them.As a detailing kit (mirrors, windshield wipers!) set # 5435 is recommended (not included!).Since the Bugatti EB 110 1:5 scale body is - just like the original very low, a very low height air filter (#9043) is required. We also recommend 9.5 mm wide wheel squares: #6107 wheel squares 9.5 mm/M6 - 2pcs..For the body side support 32781.

€169.90*

04.1115 INNOTEC Multi Clean Universal foam cleaner for all plastic and metal parts on the RC car, 600 ml can

Universal Foam Cleaner div>Multi Clean is a highly effective foam cleaner for countless types of dirt on almost all surfaces that can be easily applied to horizontal as well as vertical surfaces due to a stable active foam while intensively affecting the contaminants.Multi Clean is therefore ideal for cleaning your RC cars. Through the foam shape, Multi Clean, including the ideal product, is to liberate zbdachhimetal cladding of nicotine approaches or stains as a result of assembly work.Also on transparent plastic parts, Multi Clean achieves a perfect cleaning effect in combination with Power Clean [Link] Inno_040169: Power Clean [Endrink] without damaging damage occurring when using scrubbing agents. Multi Clean is a universal cleaner because it does not attack glass or paint or plastic. In addition, the product is free of silicone, which would make any further treatment with wax or the like. Due to foaming, Multi Clean is highly productive and last but not least through the pleasant smell. In the spray box and foaming, Multi Clean is especially user-friendly and application practical. Even wipeing will be for pleasure because the product does not leave a strip. This makes it difficult to treat hard-to-reach sites. Highlights  span> Easy application  span> versatile  span> stable foaming, thus longer exposure period  span> cleans to deep into the fibers  span> harmless for plastic, rubber, fabric, leather, glass, pmma, aluminum, varnish etc div>  span> leaves no stripes  span> spread a pleasant fresh smell CONTENTS Base: Mixture of surfactants, glycol ethers and paraffin oils in water Density: 975 kg / m³ Consistency: White foam solvent: glycol ether and water Flash point: 0 ° C foam stability: very good Processing conditions: + 5 ° C to + 30 ° C Underground: The most common surfaces, such as fabric covers, aluminum, leather, wood, paints andVarious plastics nobr> USESpray can shake well before use. Spray Multi Clean on the surface to be treated and have a brief. Then wipe the surface with a clean, dry cloth (Innotec Multi Wipe or Inno-Cleaner). For coarser surfaces Multi Clean possibly rubbing after spraying with a soft brush and then rub dry with a clean, dry cloth. With bonded panels, it is advisable not to spray the product in a large amount directly on the surface, but to apply and retract with a clean cloth. If necessary, test in advance at an unobtrusive place.Hands-Cleaning: with Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and Water Shelf life: 2 years in unopened original packaging Storage conditions: Cooling and dry Store Batchcod Type: F

Content: 600 Milliliter (€24.83* / 1000 Milliliter)

€14.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

8193FG Rear wing BMW M4 DTM clear

Genuine FG spare/option part. size: 32,5cm x 5,6cmContents:1 piece

€40.60*

8144 FG BMW 320si WTCC 2 mm clear for 530/535 wheelbase EFRA 5052/06

Genuine FG spare/option part. The Set contains the front body, the main body, the spoiler-set and the body screws. The body shell is vac-formed from 2 mm Lexan.EFRA number: 5052/06The set is delivered not painted. The body is not drilled and fits all fabricate.Required body mounts:Mount front: Rear body mount: Side body mount front: Side body mount rear: Measures:Length: 885 mmWidth: 392 mmHeigth: 260 mmWheelbase: 530 mmContents:1 piecePainting tips:

€199.95*

23150/02 FG Front body Monster Truck WB 535, clear, 1 pce.

Genuine FG spare/option part.

€49.90*

68150/01 FG Body shell Off-Road Buggy 4WD, clear - 1 pcs.

he bodyshell is made from clear unpainted polycarbonate and it´s only for 4WD models.Length 500 mmWidth 285 mmHeight 155 mmPainting tips:

€112.40*

150 products found for "pureten_mk1_clear"

Filter products

rc-car-online - Home