20 products found for "inno_040107"

rc-car-online - Home

04.0107 INNOTEC Adhesive remover and degreaser, 500 ml can

Adhesive and Seal RemoverSeal and Bond Remover is a slow evaporating universal degreaser that is also perfect for quickly and efficiently removing all types of adhesive and sealant residue. The product softens most adhesives and sealants to make them easier to remove.Seal and Bond Remover is suitable for all types of metals and most plastics. In addition, it can be used without risk on almost all modern paints. This makes it particularly suitable for removing stickers, emblems, bumper trims and any adhesive residue that may remain. Even traces of sealant and adhesive after dismantling brackets, etc. can be safely removed without damaging the substrate. Seal and Bond Remover is also ideal for making surfaces free of grease and silicone, for example before applying new stickers, emblems, etc.Due to its high dissolving power, Seal and Bond Remover is also a recommended solution for removing tar splashes or even rubber from trim, etc.In the spray can, Seal and Bond Remover is particularly user-friendly and practical to use. Thanks to the unbreakable nozzle with spray tube, even hard-to-reach places are easy to reach. In addition, the spray can has a special valve that allows it to be used in any position. This allows emblems and bumper strips, among other things, to be removed most effectively by spraying Seal and Bond Remover directly behind the part in question while slowly pulling it off. HIGHLIGHTS. Very easy to use. Ideal for removing adhesive, tar, sealant and chewing gum residues Significantly facilitates the cutting out of glued car windows. Does not attack paint or most plastics in any way OEM approved CONTENT Base: Mixture of aliphatic and aromatic hydrocarbons. Density: 762 kg/m³ Consistency: liquid (ready to spray in aerosol can) Viscosity: ± 2 mPa.s Solvent: mixture of aliphatic and aromatic hydrocarbons. Flash point: 0°C Evaporation residue: None, the product dries without residue. Processing conditions: +10°C to +40°C Substrate: The most common substrates. If necessary, test in an inconspicuous place. USAGE.Shake spray can well before use. Spray Seal and Bond Remover on the surface to be treated and allow to act briefly. Remove adhesive, tar, sealant, chewing gum residues with a Multi Wipe. Wipe off with a clean, dry cloth or Multi Wipe. For thicker layers, remove the top layer first and then repeat the treatment. Hand cleaning: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water Shelf life: 2 years in unopened original packaging Storage conditions: Store in a cool, dry place Batch code type: F Details: OEM approval

Content: 500 Milliliter (€39.80* / 1000 Milliliter)

€19.90*

E540107 UFRC Cage front mount

Genuine UFRC spare/option part. Fits Growler GX1.Contents:1 piece

€3.90*

Chrome foil, 804010, 1 pce.

Sheet size approx. 260 x 260 mm

€6.10*

E540105 UFRC Bumper, front

Genuine UFRC spare/option part. Fits Growler GX1.Contents:1 piece

€28.90*

E540103-R UFRC Side panel r/h

Genuine UFRC spare/option part. Fits Growler GX1/Ghost Rabbit GR1.Contents:1 piece

€35.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

E540104 UFRC Frame, front

Genuine UFRC spare/option part. Fits Growler GX1.Contents:2 pieces

€5.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y1596 INNOTEC Allround Complete Set

Genuine INNOTEC spare/option part. The RC-car all-round wellbeing set for cleaning, sealing and moisture displacement. Set contents: INNOTEC PE100 silicone spray for plastic and rubber care PE100 was specially developed to protect plastics from external agents. The product penetrates right into the molecular structure of the plastic, which is thus protected from the inside out, remains permanently supple and retains its natural gloss. Content 500 ml Can INNOTEC Multi Spray 1000, moisture displacing lubricant Multi Spray 1000 is a strong moisture displacing lubricant that loosens stuck parts and protects against corrosion. Multi Spray 1000 displaces moisture by penetrating between the substrate and water and then protecting the substrate like a protective film. The product is ideal for numerous applications in the RC hobby. Content 500 ml Can INNOTEC Adhesive remover and degreaser Seal and Bond Remover is a slow evaporating universal degreaser that is also perfect for quickly and efficiently removing all types of adhesive and sealant residue. The product softens most adhesives and sealants to make them easier to remove. Content 500 ml Can INNOTEC Power Clean Metall- und insbesondere Aluminium Reiniger Power Clean ist ein sicherer, schnell wirkender Reiniger/Entfetter für fast alle Arten verunreinigter Metallteile und -flächen. Das Produkt entfernt Bremsstaub, Teer, Unterbodenschutz, Fett und diverse Wachse und jede Art von Verschmutzung. Power Clean ist ein ungefährlicher Reiniger für elektronische Brems- und ABS-Systeme. Da das Produkt den Untergrund nicht angreift, eignet es sich auch besonders zum Entfernen von Teerspritzern sowie Fettund Ölflecken. Content 500 ml Can INNOTEC Multi Clean Universal foam cleaner for all plastic and metal parts on the RC car Multi Clean is a highly effective foam cleaner for countless types of dirt on almost all surfaces that can be easily applied to horizontal as well as vertical surfaces due to a stable active foam while intensively affecting the contaminants. Content 600 ml Can Set consists of:5 Dosen

€59.90* €76.90* (22.11% saved)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

E540102 UFRC Roof panel

Genuine UFRC spare/option part. Fits Growler GX1/Ghost Rabbit GR1.Contents:1 piece

€54.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

E540103-L UFRC Side panel l/h

Genuine UFRC spare/option part. Fits Growler GX1/Ghost Rabbit GR1.Contents:1 piece

€35.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

10401 FG Steel manifold for tuned pipe F1 - 1pce.

Very strong steel manifold, for use with Formula 1 Sportsline tuned pipe and tuning pipe 10400 only.

€68.20*

LOS254010 Losi Hinge Pin, Set Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:1 set

€19.99*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

E540101 UFRC Bonnet panel

Genuine UFRC spare/option part. Fits Growler GX1/Ghost Rabbit GR1.Contents:1 piece

€64.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

04.0169 INNOTEC Power Clean metal and especially aluminum cleaner, 500 ml can

Special cleaner for aluminumPower Clean is a safe, fast-acting cleaner/degreaser for almost all types of contaminated metal parts and surfaces. The product removes brake dust, tar, undercoating, grease and various waxes and any type of contamination. Power Clean is a non-hazardous cleaner for electronic brake and ABS systems. Since the product does not attack the substrate, it is also particularly suitable for removing tar splashes and grease and oil stains.Power Clean evaporates completely without leaving any residue. Another major advantage is that the product does not cause white efflorescence on aluminum parts, as is the case with most brake cleaners. Thus, Power Clean is the perfect product for cleaning clutch and engine parts. The product comes out of the spray can at high pressure, making it easy to clean hard-to-reach places. In the spray can, Power Clean is particularly user-friendly and practical to use. Highlights .  span> harmless to aluminum. div>  span> High spray pressure, therefore suitable for heavily accessible places. div>  span> leaves no residues Content base: aliphatic hydrocarbons Density: 733 kg / m³ Consistency: liquid (firefitted in the aerosol can) viscosity: 2 mPa.s li> solvent: aliphatic hydrocarbons Flash point: 0 ° C Evaporation Residue: Maximum 4% Processing conditions: + 10 ° C to + 30 ° C SURFACES.Almost all types of metal, paints and plastics. Before use on plastics and paints, always test on an inconspicuous area. USAGESpray product on the parts to be cleaned and leave to act briefly. Re-spray to completely remove loosened dirt. Hand cleaning: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water Shelf life: 2 years in unopened original packaging Storage conditions: Store in a cool, dry place Batch code type: F

Content: 500 Milliliter (€19.80* / 1000 Milliliter)

€9.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

03.1104 INNOTEC PE100 silicone spray for plastic and rubber care, 500 ml can

Special plastic cleanerPE100 was specially developed to protect plastics from external agents. The product penetrates right into the molecular structure of the plastic,which is thus protected from the inside out, remains permanently supple and retains its natural gloss.Most RC cars have various axle parts, such as control arms and bearing blocks made of plastic. Due to weather influences and especially UV rays,or contact with tire conditioners can cause the plastic to become brittle and weather over time.Especially with unpainted plastic, this process progresses relatively quickly. PE100 slows down this process and provides intensive protection,which significantly extends the life of the plastic. Also, the likelihood of seals and protective rubbers (e.g. bellows for drive parts) becomingbecome brittle are much lower.In addition to this protective effect, PE100 gives the plastic parts a fresher appearance. PE100 is also excellent for protecting electronic parts frommoisture in electronic parts. Das Produkt bildet eine wasserverdrängende Schicht und verbessert somit den Korrosionsschutz.In the spray can, PE100 is particularly user-friendly and practical to use. Thanks to the special nozzle with tube supplied, even difficult-to-reach areas can be treated effortlessly. Highlights H3>  span> clear, almost invisible fluid div>  span> Easy application div>  span> displaces moisture div>  span> Long-term effect div>  span> protects plastics against discoloring div>  span> holds rubber parts supple and prevents them freeze div>  span> protects ignition systems from moisture-related disorders div> div>> CONTENTS base: silicone oils, mineral oils and additives Density: 710 kg / m³ Consistency: liquid (firefitted in the aerosol can) viscosity: ± 15 mPa.s li> Flash point: 0 ° C compressive strength: minimal li> temperature resistance: -20 ° C to> 150 ° C li> water resistance: good li> acid resistance: resistant to dilute acids li> corrosion protection: good. Corrosion protection results from the formation of a water-displaced layer. Inputs: good li> lubricant content: 17% li> Processing conditions: + 5 ° C to + 40 ° C Underground: Most plastics, rubber and metal USAGEPreparation of the substrate: Provide a clean, dry, grease-free and non-corroded substrate.Shake can well before use. When used as a lubricant, spray the product directly onto the part to be lubricated. When used as a plastic and rubber protector, spray the product directly (spray distance 15-20 cm) or apply with a cloth or sponge. To achieve a beautiful shine, briefly polish the plastic with a clean, dry Multi Wipe. Material cleaning: With Innotec Multisol or Innotec Power Clean Hand cleaning: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water Shelf life: 2 years in unopened original packaging Storage conditions: Store in a cool, dry place Batch code type: F

Content: 500 Milliliter (€31.80* / 1000 Milliliter)

€15.90*

E540106 UFRC Cage front section

Genuine UFRC spare/option part. Fits Growler GX1.Contents:1 piece

€19.90*

E540109 UFRC Cage roof strut

Genuine UFRC spare/option part. Fits Growler GX1.Contents:1 piece

€3.90*

E540108 UFRC Cage front struts

Genuine UFRC spare/option part. Fits Growler GX1.Contents:2 pieces

€6.90*

305164, s054010, Steering post Carson / Smartech 4x4, 2 pcs.

€23.65*

03.1118 INNOTEC Multi Spray 1000, moisture displacing lubricant, 500 ml can

Moisture Displacing LubricantMulti Spray 1000 is a strong moisture displacing lubricant that loosens stuck parts and protects against corrosion. Multi Spray 1000 displaces moisture by penetrating between the substrate and water and then protecting the substrate like a protective film. The product is ideal for numerous applications in the RC hobby.It is ideal as a lubricant for bearing bushings, shafts, Bowden cables, etc., as well as for impregnating rubber. Multi Spray 1000 keeps rubber and plastic parts supple and smooth and protects plastic parts from weathering. Even already weathered plastic looks like new again due to the high penetrating power of the product. Multi Spray 1000 gives the plastic a natural shine in the process.Multi Spray 1000 cleans and protects tools, work surfaces, engines, sports equipment, boats, weapons, machines and stainless steel, copper or brass surfaces for a long time, but is also particularly suitable for electrical hand tools, switch boxes, power sockets, ignitions, batteries, spark plugs and electrical connections. These are often located in places exposed to weather, dirt, grease and road salt. Multi Spray 1000 has a protective effect, preventing corrosion.Multi Spray 1000 is one hundred percent silicone-free and therefore also an ideal working aid in repair shops and paint stores, or in any place where paints are processed industrially. All these properties make the product the perfect (light) lubricant, cleaner and protector for any work in the workshop. Multi Spray 1000 is available as a user-friendly spray can with extra nozzle and tube for those hard to reach places. HIGHLIGHTS. Loosens stuck parts and protects against corrosion. Keeps rubber and plastic supple and smooth Cleans and protects for a long time. Silicone free! Displaces moisture Ideal lubricant for locks, tools, cables etc.  Schützt elektrische Verbindungen auf sehr lange Daue  OEM-Genehmigung CONTENT base: mineral oil with special additives Density: 718 kg / m³ Consistency: liquid (ready to spray in the aerosol can) viscosity: 17.5 mPa.s (at 50 ° C) Flash point: 0 ° C compressive strength: minimal temperature resistance: -20 ° C to + 120 ° C water resistance: good against condensing moisture, moderately against sprayed water li> Acid Resistance: Good for sour haze, moderately against sour fluids no rust after 1000 hours (steel plates in relative humidity of 95%) no rust after 50 hours of salt spray test, starting rust after 100 hours Penetrating power: good Lubricant content: 25% Tests: Meets NSF requirements for category H2, registration number: 153349. Application conditions: -20°C to +40°C Substrate: All ferrous and non-ferrous metals, rubber and many plastics (except PMMA, PC, PTFE) USAGEPreparation of the substrate: Provide a clean, dry, grease-free and non-corroded substrate.Shake spray can well before use. When used as a lubricant, spray the product directly onto the part to be lubricated. When used as a plastic and rubber protector, spray the product directly (spray distance 15-20 cm) or apply with a cloth or sponge. To achieve a beautiful shine, briefly polish the plastic with a clean, dry Multi Wipe. Material cleaning: With Innotec Multisol or Innotec Power Clean Hand cleaning: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water Shelf life: 2 years in unopened original packaging.

Content: 500 Milliliter (€29.80* / 1000 Milliliter)

€14.90*

04.1115 INNOTEC Multi Clean Universal foam cleaner for all plastic and metal parts on the RC car, 600 ml can

Universal Foam Cleaner div>Multi Clean is a highly effective foam cleaner for countless types of dirt on almost all surfaces that can be easily applied to horizontal as well as vertical surfaces due to a stable active foam while intensively affecting the contaminants.Multi Clean is therefore ideal for cleaning your RC cars. Through the foam shape, Multi Clean, including the ideal product, is to liberate zbdachhimetal cladding of nicotine approaches or stains as a result of assembly work.Also on transparent plastic parts, Multi Clean achieves a perfect cleaning effect in combination with Power Clean [Link] Inno_040169: Power Clean [Endrink] without damaging damage occurring when using scrubbing agents. Multi Clean is a universal cleaner because it does not attack glass or paint or plastic. In addition, the product is free of silicone, which would make any further treatment with wax or the like. Due to foaming, Multi Clean is highly productive and last but not least through the pleasant smell. In the spray box and foaming, Multi Clean is especially user-friendly and application practical. Even wipeing will be for pleasure because the product does not leave a strip. This makes it difficult to treat hard-to-reach sites. Highlights  span> Easy application  span> versatile  span> stable foaming, thus longer exposure period  span> cleans to deep into the fibers  span> harmless for plastic, rubber, fabric, leather, glass, pmma, aluminum, varnish etc div>  span> leaves no stripes  span> spread a pleasant fresh smell CONTENTS Base: Mixture of surfactants, glycol ethers and paraffin oils in water Density: 975 kg / m³ Consistency: White foam solvent: glycol ether and water Flash point: 0 ° C foam stability: very good Processing conditions: + 5 ° C to + 30 ° C Underground: The most common surfaces, such as fabric covers, aluminum, leather, wood, paints andVarious plastics nobr> USESpray can shake well before use. Spray Multi Clean on the surface to be treated and have a brief. Then wipe the surface with a clean, dry cloth (Innotec Multi Wipe or Inno-Cleaner). For coarser surfaces Multi Clean possibly rubbing after spraying with a soft brush and then rub dry with a clean, dry cloth. With bonded panels, it is advisable not to spray the product in a large amount directly on the surface, but to apply and retract with a clean cloth. If necessary, test in advance at an unobtrusive place.Hands-Cleaning: with Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and Water Shelf life: 2 years in unopened original packaging Storage conditions: Cooling and dry Store Batchcod Type: F

Content: 600 Milliliter (€24.83* / 1000 Milliliter)

€14.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

20 products found for "inno_040107"

Filter products

rc-car-online - Home