8380/06 FG Tank gasket
Product information "8380/06 FG Tank gasket"
Genuine FG spare/option part.
Spare part for order no: 8380.
Contents:
Spare part for order no: 8380.
Contents:
- 1 set
Login
Alternatives
Genuine FG spare/option part.This fuel cap tuning seal ensures a perfect seal of your fuel tank (items 8380/06, 8380/08 are not included).Drill with an 8 mm hole through the tank lid. Insert seal # 8384/02 into the neck of the lid.Insert seal # 8380/06 along with the aluminum cover with sealing ring into the plastic lid (# 8380/08).Tighten the complete assembly with the included nut, and finally add vent fitting # 8381/03.Reinstall the lid onto the tank.Content:1 set
Customers also bought
Keeps cool air coming to your engine by keeping dirt and grass from clogging up the pull starter area. Easily wipe off anything not deflected away. Installs on the starter cover with hook & loop tape. With metal cable management.If using a FG monster / stadium model an additional hole for the support of the lateral carrier plate has to be cut out.
Genuine FG spare/option part. Nylon bag with a main compartment and two side bags. Ideal for storing rims and tires for 1:5 and 1:6 scale models.Colour: Black with FG print.Dimensions: 57 x 35 x 24 cmContents:1 piece
Genuine FG spare/option part. The advantage of a one-way clutch over conventional or limited slip differentials is the combination of maximum propulsion and outstanding agility in the turns. This results in a 4WD vehicle with the quick turning-in of a 2WD while retaining the advantages of 4WD traction when accelerating out of corners.This applies to offroad and street cars alike.The inner races in the one-way clutch feature the internal spline drive to accept FG differential shafts. They are made of high strength steel, hardened and ground to very close tolerances. Combined with the large one-way clutches, this guarantees the transfer of the high maximum torque.Installation is pretty easy; the one-way clutch unit replaces the bevel gears in the diff including the satellite gear shaft and is inserted as a single piece into the differential case. You just have to take care that the side where the writing on the clutch can be seen goes to the left hand side (in the direction of travel).Fits FG-plastic differential case and HT- or FG-aluminum cases for non-self-locking differential versions.For vehicles not equipped with in-wheel brakes it should be noted that there will be no more braking action in front from the layshaft brake when running the one-way clutch as a front differentialOnly for 4WD models. Suitable for all differential housings except viscous and Powerlock diff.Contents:1 piece
FG Catalog 2025 only as download.
Link :
https://drive.google.com/file/d/1HImXhA0lNk3j4V1aV_zAJQLvaNoPSG2d/view?usp=sharing
This pair of Tyres have the following use indications: VERY HIGH GRIP situation for very clean track. VERY HIGH GRIP situation for big asphalt. VERY HIGH GRIP situation for very high temperatures. This pair of Tyres have the following technical features: REVO treated profile for the maximum traction and the maximum lateral grip. Treated profile studied to maintain the tyre surface alway clean from rubber murble. Compound exclusively developped for model tyres. Inside belt flexible but very strong, vulcanized directly together with tyre compound. Insert foam with special material for high temperatures, for maximum stability and high drive precision. Spoked wheel moulded with special material for high temperatures for maximum grip and stability. Special gluing system 100% guaranteed.The main sizes for this tyre are: WHEEL fixing with square 18mm. TYRE outside diameter 118mm. WHEEL inside diameter 90mm. TYRE tota width 65mm. Note:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability. Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!
Genuine FG spare/option part.Dimensions:6 x 8 x 7,5 mmContents:6 pieces
Customers also viewed
Genuine FG spare/option part. Plastic Rammer for fixing the front body mounts for the Audi RS5.Dimensions:Length: 125 mmWidth: 390 mmContents:1 piece
23 cc Zenoah engine for large scale cars!The engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch and / or ball beard carburetor are optionally available at additional charge.Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise. Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.
Genuine FG spare/option part.This fuel cap tuning seal ensures a perfect seal of your fuel tank (items 8380/06, 8380/08 are not included).Drill with an 8 mm hole through the tank lid. Insert seal # 8384/02 into the neck of the lid.Insert seal # 8380/06 along with the aluminum cover with sealing ring into the plastic lid (# 8380/08).Tighten the complete assembly with the included nut, and finally add vent fitting # 8381/03.Reinstall the lid onto the tank.Content:1 set
Ready for an extra portion driving fun? Then try the FG Monster Buggy Pro! This aggressive looking model based on the Fun Cross chassis is extremely fast, easy to handle and very pleasant to drive. A complete package of well-tried racing technology! The model will be delivered with a clear body shell.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Equipment of the modelAngled 4 mm, alloy chassis, completely covered belt drive, two differential gears at front and rear axle with hardened bevel gearwheels, closed front axle housing, front bumper, double wishbones at front and rear axle, gear brake, adjustable right/left thread rods at the track rods and at the front and rear wishbones, front uprights with steering stops, gearwheels made of case-hardened steel, completely ballbeared, four large-volume oil-pressure shock absorbers, receiver box.HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount smallCNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant.Value: 54,90 EURDriveshaft bootsProtect ball drive as well as cardan drive against dirt. 4 pairs / 8 piecesValue: 42,90 EURAlloy spur gear carrierUse for 46T - 48 teeth spur gears.Value: 39,90 EURTotal value: 200,30 EURPowerful 26 cm³ petrol engineMaintenance friendly chassis2 Differential gearsHardened driving partsCompletely ball-bearingedLarge-volume alum. dampersAggressive rim designGrip tires with 185 mm diameter and 95 mm widthReady to use Off-Road filterSimple handlingLow weightPure funThe model is equipped with a powerful 26cm³ (series) combustion engine with ready-for-use oiled air filter. The engine runs with normal 2-stroke petrol-oil mixture (available at every patrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-stat system the engine can be started without any difficulties. The RTR version is delivered with installed and preset radio control system and rechargeable batteries. To complete the non-RTR version all popular servos and radio control systems are suitable.Measures:Length: 715 mmWidth: 495 mmHeight: 360 mmWheelbase: 535 mmWeight: 10,4 kg