6081/01 FG Steel ball Ø5mm 10x15 mm

€16.90*

Available

Product number: fg_6081_01

EAN: 3410564505960

Product information "6081/01 FG Steel ball Ø5mm 10x15 mm"

Genuine FG spare/option part.

Ball joint with 5mm bore suitable for all FG plastic ball-and-socket joints.

Contents:

4 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Customers also bought

6029/08 FG Ball-and-socket joint for M8

Genuine FG spare/option part. Reinforced plastic ball-and-socket joints for M8 thread rods. Replacement for the plastic ball-and-socket joints 6029/01.Fits 10 mm balls, total length 39 mm.Contents:4 pieces

€12.90*

6029/07 FG Ball-and-socket joint for M6

Genuine FG spare/option part. Reinforced plastic ball-and-socket joints for M6 thread rods. Replacement for the plastic ball-and-socket joints 6029.Fits 10 mm balls, total length 39 mm.Contents:4 pieces

€12.90*

6030/05 FG Steel balls with covering disc Ø4mm/10 x 15,5 mm

Genuine FG spare/option part. Made from hardened steel.Dimensions:Inner diameter: 4 mmHight: 15,5 mmThickness: 10 mmContents:4 pieces

€13.90*

6029/05 FG Ball-and-socket joint 10mm for M8 adjustable

Genuine FG spare/option part. Contents:4 pieces

€12.90*

6030 FG Steel ball 10x10,75 mm

Genuine FG spare/option part. Steel ball with 4 mm bore.Contents:4 pieces

€12.90*

y6107/01 Wheel squares 18 mm HART-COAT, 14 mm wide

Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)14 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 14 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€17.45*

Similar products

6077/05 FG Steel ball 10x13mm for rear upright - 2pcs.

Steel ball for rear upright.5 mm bore diameter

€8.50*

6079/05 FG Ball driving axle M8

Original FG Ersatz-/Tuningteil.Inhalt:1 Stück

€35.90*

6065/01 FG Plastic diff. cover

Original FG Ersatz-/Tuningteil.Well-priced but still effective plastic diff. cover. Stones can damage metal covers and it is difficult to removethem. According to the flexible plastic material an impressing becomes hardly possible. If it still happens the cover can be easily removed through cutting with a knife or a scissors.Dimensions:Length: 43 mmDiameter: 45 mmFlange diameter: 65 mmInhalt:1 Stück

€6.90*

6077/02 FG Screws M5x30 mm for rear uprights

Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Contents:4 pieces

€2.95*

6064 FG Differential case

Genuine FG spare/option part. Stock plastic differential case. Also available in aluminum.Dimensions:Length: 70 mmDiameter: 42.5 mmFlange diameter: 65 mmBearing seats: 12 x 8 mmShaft bore: 8 mmInner dimensions: 40 x 30 mmContents:1 piece

€25.50*

6069/01 FG Differential axle spline drive

Genuine FG spare/option part.For all FG cars with standard drive shafts (no ball drive). Accepts dogbones with 10 mm ball and 4 mm pin.Dimensions:Shaft, diameter: 8 mmLength: 27 mmSpline drive for FG bevel gearsCup, diameter: 18,5 mmLength 14 mmContents:1 piece

€27.90*

6078 FG Ceramic ball bearings, sealed 8x22x7 mm

Genuine FG spare/option part.Why ceramic? Besides corrosion and wear resistance ceramic balls are smoother and have a better shape stability; resulting in less drag from the bearing itself.Wheel bearing suitable for all FG and Carson models.Contents:2 pieces

€19.90*

6080 FG Rear dogbone

Genuine FG spare/option part. Replacement drive shaft (dogbone). Long Version.Suitable for BMW GTR, Mercedes CLK-GTR, Race-Trucks, C291, Porsche GT1, GT2, GT3 and all FG Off-Road models.Dimensions:Shaft diameter: 7 mmBall diameter: 10 mmLength: 101,5 mmContents:1 piece

€17.90*

This product is currently not available.

6062 FG Rear diff mount right

Genuine FG spare/option part. Contents:1 piece

€12.90*

6057 FG Window grid r/h

Genuine FG spare/option part. Suitable for 6154, 6155, 6154/03.Dimensions:Width: 195 mmHeight: 80 mmContents:1 piece

€15.90*

This product is currently not available.

6077/08 FG Spacer bushing for rear upright

Genuine FG spare/option part. Only suitable with standard size ball bearings.Dimensions:Length: 10 mmOuter diameter: 11 mmInner diameter: 8 mmContents:2 pieces

€4.50*

6061 FG Rear diff mount left

Genuine FG spare/option part.Contents:1 piece

€12.90*