7430/24 FG Alloy gearwheel 24 teeth
€26.90
% €30.20 (10.93% saved)
Available
Product information "7430/24 FG Alloy gearwheel 24 teeth"
Extreme light alloy gear wheel in anodizing quality with 24 teeth.
Suitable for the gear wheels with 39, 40 and 41 teeth.
Dimensions:
- Diameter: 38,7 mm
- Bore: 10 mm
- Total width: 18 mm
- Tooth width: 11,5 mm
- Module: m=1,5
Contents:
- 1 piece
Lebacher Strasse 4
66113 Saarbrücken
Germany
Login
Customers also bought
Light and very solid air box, high air permeability for more engine power. With choke for the Zenoah engines G240RC and G270RC in 1:5 touring cars and 1:6 race trucks. DMC legal ( No. DMC 5 - 093 ).The set includes: Air filter adapter, air box, foam filter, gaskets and installation hardware.
Genuine HT spare/option part. Fits all CY / Zenoah engines. Laser cutted stainless steel.The long design increases stiffness of the carburetor assembly significantly compared to the previous version. Comes with gasket and mounting bolt.Content:1 piece
Genuine FG spare/option part. Powerfull servo for 2WD and 4WD 1/5 and 1/6 cars. Ballraced, with metal gears.Technical data:Voltage : 6.0-7.4VSpeed : 0.14s-0.12s/60°Torque: 9-10kgcmDimensions : 40.8 x 20.1 x 38 mmWeight : 56 gContents:1 piece
Genuine spare/option part.Protects chassis and body shell.Dimensions:Length: 334 mmWidth: 20 mmBore: 8 mmContents:2 pieces
Customers also viewed
Extreme light alloy gear wheel in anodizing quality with 23 teeth suitable for the gear wheels with 39, 40 and 41 teeth.Diameter 38,7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.
Hard coated surface for wear protection.Non-standard sizes use two numbers for definition. The second number gives the size of the corresponding ring gear.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.
The alloy housing has an outside thread to adjust the damper spring. The upper alloy shock absorber seal is equipped with a ventilation boring which makes the refilling if the damper easier. Completely new is the lower shock absorber seal with the plastic guiding bushes for the damper piston rod and for an easier chaning of the o-rings. The alloy adjusting ring has a socket for the spring collet and an adjusting mark. The shock absorber 2004 has an diameter of approx. 16mm. Suitable for all damper springs with approx. 17mm inside diameter .With 115 mm hole distance.
Suitable for all 1:5 models. With 63 mm diameter.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.
Outer diameter 72 mmInner diameter 26 mmBolt circle 3 x 35 mmWidth 10 mmModule m=1.5
Genuine FG spare/option part. The set includes: 10250/02 FG Body set F2000 1.5 mm 10254 FG Rear spoiler for F1 10455 Frontspoiler 10265/03 Decals Contents:1 set