17 products found for "fg_7100"

rc-car-online - Home

7100 FG Adjusting clip for 16 mm axle, 16 pcs.

These adjusting clips allow a faster adjustment of the wishbones. Suitable for front and rear suspension. The set contains 16 adjusting clips in 2 and 6mm size for 6 mm axles.

€9.50*

67100 FG Body Leopard Sportsline, white, 1St.

Item N° 67100 Body Leopard Sportsline, white, 1St.The bodyshell is made from colored (not painted!) polycarbonate.

€124.95*

7101 FG Front axle support - 1pce.

Riser plate for the front end of 1/5 touring cars and race trucks with plastic front suspension.Raises the front bulkhead 13 mm over the rear one.

€8.90*

7200 FG alloy shock absorber 04 short

Genuine FG spare/option part. The alloy housing has an outside thread to adjust the damper spring. The upper alloy shock absorber seal is equipped with a ventilation boring which makes the refilling if the damper easier. Completely new is the lower shock absorber seal with the plastic guiding bushes for the damper piston rod and for an easier chaning of the o-rings. The alloy adjusting ring has a socket for the spring collet and an adjusting mark. The shock absorber has an diameter of approx. 16 mm. Suitable for all damper springs with approx. 17 mm inside diameter .With 110 mm hole distance.Contents:2 pieces

€74.90*

7180 FG Damper spring 1,8mm pink, 2 pce.

Item N° 7180 Damper spring 1,8mm pink, 2 pce.Suitable for all FG shock absorbers and also for other makes with an outside diameter of 16mm.Measures:Length: 53 mmOutside diameter: 20 mmWire diameter: 1,8 mm

€11.60*

7102 FG Front wishbone pin - 2pcs.

6 x 87 mm

€9.90*

1100 FG Front lower alloy wishbone left Evo 04

Genuine FG spare/option part. Contents:1 piece.

€76.90*

7800 FG Zenoah G290RC with Walbro carburetor WT 990

Same dimensions as the Zenoah G230, G240, G260, G270.New generation Zenoah engine with 28,5cm³ cylinder capacity and approx. 3.9 hp. The cylinder is fixed with 4 screws. The technical details are identical to the Zenoah engines G240RC and G270RC.The engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch and / or ball beard carburetor are optionally available at additional charge. Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise. Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.

€284.90*

7105 FG ATS rim white 65mm - 2pcs.

Suitable for all FG 1:5 models and other makes.Rim with 18 mm square driveRim width: 65mmRim diamter: 95mmColour: White

€18.80*

7106 FG ATS rim silver 65mm - 2pcs.

Suitable for all FG 1:5 models and other makes.Rim with 18 mm square driveRim width: 65mmRim diamter: 95mmColour: Silver

€20.70*

8100 FG Front lower wishbone 1:5

Genuine FG spare/option part. Up to version 2004.Contents:1 piece

€16.50*

6100 FG Front wishbone 2WD

Genuine FG spare/option part. Standard plastic wishbone for all 2WD FG off road models except Leopard race and monster/stadium models with dual shock axles.Contents:1 piece

€17.50*

671000 FG Leo Competition 2020.2 Expert 2WD

Special tuning parts in front: 67320 aluminum shock absorber long 67289 Aluminum front shock mount 67289/01 Shock mount board Special tuning parts rear: 67231 aluminum rear damper plate 67331 Big Bore Shocks 67332 Lower rear shock mount 67316 Big Bore springs soft 67317 Big Bore Springs hard The new off-road flagship from FG. The Leopard Competition Expert 2020.2, made of high-quality aluminium and carbon fibre components, is the winner of the first French championship, showing directly what this vehicle is capable of. The model comes with a 26cc engine, a central hydraulic brake, wheels and unpainted clear body. This buggy combines high performance with top driving characteristics and maximum reliability.The complete radio system and the servos (RTR!) are required for operation.The complete RTR equipment can be selected in our online shop options menu for a surcharge.The new benchmark for 2WD competition buggiesNew extended chassis with 580 mm wheelbaseMilled front chassis part to improve mass distributionSide chassis stiffeners made of T7075 alloy Newly developed tuned pipe systemNewly developed and weight-saving radio plateWinner of the first racing series of the French championshipDimensions:Length: 780 mm Width: 470 mmHeight: 330 mmWheelbase: 580 mmWeight: 10 kg

€2,490.00*

Configure now