6176 FG Dampening rubber for body support

€9.90*

Prices incl. VAT plus shipping costs

Available

Product number: fg_6176

EAN: 3410564506721

Product information "6176 FG Dampening rubber for body support"

Genuine FG spare/option part.

Contents:

4 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

6175 FG Body support Monster models

Genuine FG spare/option part.Dimensions:Length: 170 mmWidth: 28 mmThickness: 5 mmContents:1 piece

€5.90*

Similar products

6134/01 FG Engine mount small for CY / Zenoah Marder 2WD, 4WD

Genuine FG spare/option part.Fits all FG 2WD and 4WD off road cars except Leopard and Leopard race or for CY / Zenoah G230/240/260/270.Contents:1 piece

€13.90*

6180/01 FG Roll bar for Stadium Truck

Genuine FG spare/option part. This roll bar is just for looks, not for protection. It consists of aluminum tubes and plastic corner joints.Fits stadium truck body shells.Contents:1 set

€16.30*

6175 FG Body support Monster models

Genuine FG spare/option part.Dimensions:Length: 170 mmWidth: 28 mmThickness: 5 mmContents:1 piece

€5.90*

6135 FG Engine mount large Zenoah/Marder 2WD

Genuine FG spare/option part.Fits all FG off road cars except Leopard and Leopard race.Contents:1 piece

€15.90*

6155 FG Marder body shell Zenoah white

Genuine FG spare/option part. The FG Marder body shell is delivered white and without window gitter or decal set.Dimensions:Length: 580 mmWidth: 240 mmHeight: 205 mmContents:1 piece

€114.99*

6183/01 FG Alloy spacer tubes, 8x27 mm/10x34 mm

Genuine FG spare/option part. Necessary for 6183 and 6184.Contents:2 pieces

€7.90*

6137/01 FG Spacer tubes for gear plate

Genuine FG spare/option part.For offroad cars (vertically installed engine). Set with two 26,3 mm and one 24,3 mm, 6 mm bore.Contents:3 pieces

€9.50*

6180 FG Roll bar for Big Foot

Genuine FG spare/option part.This roll bar is just for looks, not for protection. It consists of aluminum tubes and plastic corner joints.Fits monster truck body shells.Dimensions double loop:Height: approx. 100 mmWide: approx. 230 mmDimensions kickers section:Length: approx. 190 mmWidth: approx. 120 mmContents:1 set

€29.30*

6156 FG Team ecals Marder/Zenoah - 1pce.

Standard Marder decals.Sheet dimensions:430 x 310 mm

€33.90*

6138/01 FG Bowden cable holder for rear disk brake

Genuine FG spare/option part. Contents:1 piece

€5.30*

6185 FG Side body mounts

Genuine FG spare/option part. For all monster models.Contents:2 pieces

€5.50*

6181 FG Front wishbone for Monster-Truck

Genuine FG spare/option part. Plastic wishbone for all monster and stadium modelsContents:1 piece

€12.95*

Customers also viewed

6034/01 FG Plastic part for stiffening brace

Genuine FG spare/option part. Necessary for installation of 6034.Dimensions:Length: 35 mmDiameter thicker part: 10 mmDiameter thin part: 76 mmThread: M4Contents:2 pieces

€4.90*

6180 FG Roll bar for Big Foot

€29.30*

6180/01 FG Roll bar for Stadium Truck

Genuine FG spare/option part. This roll bar is just for looks, not for protection. It consists of aluminum tubes and plastic corner joints.Fits stadium truck body shells.Contents:1 set

€16.30*

6185 FG Side body mounts

Genuine FG spare/option part. For all monster models.Contents:2 pieces

€5.50*

y1483 Walbro WT-1048 Racing carburetor

y1483 Version: y1483/01 WT-1048 Racing carburetor

Genuine Walbro spare/option part.Popular performance carburetor without choke; with 13.5 mm venturi diameter, especially suitable for large-displacement engines like the Zenoah G320.The stock throttle shaft has been replaced with the proper version required for car applications; including the throttle lever as well.All existing throttle linkages can therefore be connected as usual without modifications.This carburetor does not feature a primer bulb nor a connection for a return line. It is therefore only connected to the supply line from the tank, the return line of the tank has to be closed.Optional ball bearing of the throttle shaft can be selected from the shops menu.Contents:1 piece

€97.90*

8381/05 FG Tank venting valve, 1pce.

Item N° 08381/05 Tank venting valve, 1pce.Small handy vent valve for the fuel tank ventilation. Replaces the previously used vent hoses.

€12.90*

FG Monster Truck WB535 HT-Edition

The Wheelbase of the WB535 2WD version is 60 mm longer. This modification improved the directionally stability as well as further driving qualities significantly. In addition parts of the 4WD Monster models were assembled in order to make a conversion to a 4WD model possible with low efforts. According to the large tires this model can be driven almost everywhere. The 26 cm³ Zenoah engine provides sufficient power. Driving fun as well as tremendous looks are the prime characteristics of these models.The body shell comes unpainted, a decal set with writings for further decoration is enclosed in the delivery.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Technical description:The undercarriage of the Monster models is built on a 4 mm angled alloy plate. All borings for fixa- tion of the chassis parts at the bottom side are countersunk in order to prevent the screw heads from sticking out. At the front axle you have the possibility to adjust toe-in or toe-out as well as the wheel camber through track rods with right-hand/left-hand thread. The wheel camber of the rear wheels can be adjusted individually through adjusting screws with right-hand/left-hand thread. Four large-volume oil-pressure shock absorbers are mounted at the lower double wishbones of front and rear axle, these are able to absorb larger shocks of jumps to a great extent and care for an optimal road grip. All rotating drive components are supported by ball bearings. Highly stressed steel parts such as rear gearwheels, differential gears and drive components are hardened. Fuel tank and ra- dio control parts are protected through alloy plates at the sides. The body parts are made of coloured or respectively clear polycarbonate. The Monster tires with tire inserts are glued on chrome-plated rims.The models are equipped with a powerful 26 cm³ combustion engine with ready-for-use oiled air fil- ter. The engine runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-start system the engine can be started without any difficulties.HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount smallCNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant.Value: 54,90 EURAlloy spur gear carrierUse for 48T - 46 teeth spur gears.Value: 39,90 EURBall bearing set, sealed, set of 15The seal rings on sealed ball bearings keep dirt and dust out of the bearings. They are therefore particularly suitable for use in dirty and dusty environments.Value: 59,90 EURTotal value: 217,30 EURThe pictures may display the car with some optional items which are not included, like bed-mounted rollbar, lights, front bumper or mirrors. These items can be added in the drop down menus.The RTR version is delivered with assembled and preset radio control system and rechargeable batteries. To complete the non-RTR version all popular servos and radio control sys- tems are suitable.Dimensions: Length: 780 mm Width: 510 mm Height: 350 mm Wheelbase: 353 mm

€1,179.90*

Configure now