6103/06 FG Alloy upright front 1:6 2WD

€99.99*

Available

Product number: fg_6103_06

EAN: 3410564506318

Product information "6103/06 FG Alloy upright front 1:6 2WD"

Genuine FG spare/option part.

Suitable for all FG 2WD 1:6 Off-Road and monster models.

Bearing seats: 22 x 7 mm.

Contents:
1 set

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Alternatives

y0932 HT Alloy front uprights for FG / Smartech

Genuine FG spare/option part. Machined alloy front uprights with replaceable steering arm, accept 608 sized bearings (8 x 22 x 7 mm, stock size). Fits all FG (except 4wd models) and Carson / Smartech 2WD 1/5 and 1/6 cars.included in delivery contents:4 x M5 x mm screws8 x M3 x mm screws8 x M5 x mm washerFor installation in offroad cars you will need shorter steering rods 7028/01.Contents:2 pieces

€129.90*

Customers also bought

%

y04475 HT Rear alloy shock mount 2WD

Genuine HT spare/option part.Rear alloy damper plate with several adjustment possibilities of the shock absorbers. Replacement for FG plastic rear shock tower FG 7072/01Please note: When installing in combination with plastic diff mounts you should insert a-arms with hinge pins before bolting together rear plate and diff mounts.Content:1 pieces

€86.90* €89.90* (3.34% saved)

6496 FG Alloy front bulkhead 2WD A and B

Genuine FG spare/option part.CNC-manufactured front axle mounts A and B in alloy with rebound stop. The borings for the wishbone pins are equipped with guide bushes. Suitable for Marder, Marder Race, Beetle On-/Off-Road and Monster models.Contents:1 set

€78.95*

Elcon 14404, front shock tower for FG Monster Truck 2WD

CNC-milled aluminum version, suitable for the old version of the FG 2WD monster and stadium models. These vehicles were distinguished by coming from the factory with four shocks each front and rear. The shock tower comes complete with mounting hardware and four quick-release mounts for the upper shock ends.

€79.90*

y6479 HT rear alloy upright

Genuine HT spare/option part.Alloy upright for a ball fastening at the upper wishbone. Adjustable at the lower wishbone (hinge pin), too. Fits the rear axle of all FG and Carson / Smartech 1/6 scale cars.Comes with adjustment clips and grub screws for the hinge pins included.Dimensions:Bearing seats: 22 x 7 mmHinge pin bore: 6 mmDistance wheel shaft/hinge pin: 25 mm Contents:2 pieces

€89.90*

7028/01 FG Track rod left/right for 1:5 65 mm, 2 pcs.

Genuine FG spare/option part.Alloy track rod.

€12.90*

y6107/01 Wheel squares 18 mm HART-COAT, 14 mm wide

Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)14 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 14 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€17.45*

Customers also viewed

4407 FG Axially displaced front aluminium uprights 1,5 mm

Genuine FG spare/option part. With 1,5 mm displaced axial. Fits FG Evo and Competition.Content:2 x Uprights2 x Steering arm2 x Stop unitConsumables

€129.95*

10470 FG Front alloy uprights for F1

Front alloy upright for the Formula 1 models. CNC-cut, optimal fitting, non-twisting even by heat. Recommendable when mounting a disk brake.

€128.99*

68413 FG Front alloy uprights 4WD

Genuine HT spare/option part.The set includes uprights, steering arm, stoppers and screws.Suitable for Off-Road Buggy 4WD RTR, Off-Road Beetle 4WD RTR and Monster/ Stadium models 4WD RTR and Mini and Leopard 2 und 4WD.Contents:1 set

€219.95*

6497 FG alloy front axle for 2WD Monster-Truck models for double shocks setup - set

Genuine FG spare/option part.Solid alloy front axle for all FG 2WD Monster-Stadium models for twin shock absorbers.Without Shocks and uprights.Contents:1 set

€269.95*

y7092/02 Aluminium spring plate small 16 mm, 4 pieces

Alloy spring retainer, replaces FG 7092 or Carson 32556.Fits all FG shocks with 16 mm body and all Carson / Smartech 2WD and many other 1/5 and 1/6 scale models.Dimensions:Retainer diameter: 23 mmAccepts springs with approx. 16 mm inner diameterSlot for 4 mm shock shaftContents:4 pieces

€29.90*

LOS45006 Left & Right Tire & Foam Insert Losi DBXL 1/5 4WD

Genuine Losi spare/option part.

€109.99*

Details

y0932 HT Alloy front uprights for FG / Smartech

Genuine FG spare/option part. Machined alloy front uprights with replaceable steering arm, accept 608 sized bearings (8 x 22 x 7 mm, stock size). Fits all FG (except 4wd models) and Carson / Smartech 2WD 1/5 and 1/6 cars.included in delivery contents:4 x M5 x mm screws8 x M3 x mm screws8 x M5 x mm washerFor installation in offroad cars you will need shorter steering rods 7028/01.Contents:2 pieces

€129.90*