23 products found for "cs_ke04001"

rc-car-online - Home

KE04001 Carson Throttle/brake Servo 20kg

Genuine Carson spare/option part. Dimensions40,8 x 20,1 x 38 mm Contents:1 piece

€39.90*

E540018 UFRC Wheel hex

Genuine UFRC spare/option part. Fits Growler GX1.Contents:2 pieces

€24.90*

540019, Shaft, front

Front axle intermediate shaft for Kamitiro 4WD kit.

€16.40*

540015, Pitman arm

Lower servo saver part for Kamitiro 4WD kit.

€20.40*

B64001 Chassis plate

Contents:1 piece

€249.90*

E540011 UFRC Schock beam

Genuine UFRC spare/option part. Fits Growler GX1.Contents:1 piece

€14.90*

E540015 UFRC Hinge pin bushing A

Genuine UFRC spare/option part. Fits Growler GX1.Contents:4 pieces

€4.90*

E540017 UFRC Wheel shaft

Genuine UFRC spare/option part. Fits Growler GX1.Contents:1 piece

€19.90*

540017, Bearing flange, engine, l/h

L/h bearing block for middle layshaft.

€34.10*

10400 FG F1 tuning pipe

For install you need FG Exhaust FG 10215.

€165.20*

HW30850400 Hobbywing OTA Bluetooth Programer

Product information "Hobbywing OTA Bluetooth Programer"Thanks to the OTA Programming Module, Hobbywing ESCs can be programmed in a new modern and intuitive way. The ESC is wirelessly connected to a smartphone via the Bluetooth signal sent by the module. All parameters can then be selected and set as usual in the Hobbywing "HW Link" app.The OTA programming module is also smaller and lighter than a conventional programming box and therefore fits comfortably in any pocket. So perfect for on the go.FeaturesEasy to operateCompact designData Recording in real time (compatible ESC required)Firmware-Update within the "HW Link"-AppInclusive Reset-Button on the bottom sideSuitable for the following HobbyWing productsselected XERUN and EZRUN-ESCs for RC carsselected PLATINUM-ESCs for RC aircraftsselected SEAKING-ESCs for RC BoatsTechnical SpecificationsDimensions:30x25.5x8.5mmWeight:10.2gWorking Voltage:5-12.6VEffective Range:0-3mSupported Bluetooth-Version:>/= 4.0 Notice: You can download the "HW Link"-App by Hobbywing for Android-Devices in the Google Play Store as well as for IOS-Devices in the Apple Store.

€33.20*

E540014 UFRC Ball head A

Genuine UFRC spare/option part. Fits Growler GX1.Contents:2 pieces

€14.90*

E540010-L UFRC A-arm, front upper l/h

Genuine UFRC spare/option part. Fits Growler GX1.Contents:1 piece

€16.90*

540016, Bearing flange, engine, r/h

R/h bearing block for middle layshaft.

€29.80*

Chrome pinstripes, 804009, 1 pce.

Precutted chrome pinstripes, approx. 2 mm wide. Sheet size approx. 63 x 275 mm

€6.10*

540011, Engine connecting plate

Rear engine brace plate for Kamitiro 4WD kit.

€46.00*

E540012 UFRC Shaft for shock beam

Genuine UFRC spare/option part. Fits Growler GX1.Contents:1 piece

€19.90*

E540010-R UFRC A-arm, front upper r/h

Genuine UFRC spare/option part. Fits Growler GX1.Contents:1 piece

€16.90*

E540013 UFRC A-arm bracket front upper

Genuine UFRC spare/option part. Fits Growler GX1.Contents:1 piece

€16.90*

50040050 Lightscale alloy rebound gauge, black, 1 pce.

The Lightscale Camber Gauge is a black anodised alloy block that features 8 different angled planes in 0.5° steps from 0.5° to 4° on different surfaces. The gauge is to be layed down beside a tyre for negative camber angles and any 90° part is put on one of the planes an pulled towards the tyre. Doing so you can easily check the camber of your tyres. To check positive camber, just turn around the gauge. Turning the gauge upside down will make it a 10mm high block to support you measuring the droop of any 1/5, 1/6 and 1/10 scale Electric or nitro car. Those are usually put on 10mm support blocks and beeing measured their droop with a special tool. The Lightscale ride height gauge (50160200) is a droop gauge as well and will do the job for you.

€27.90*

TLR254001 TLR Adjustable Rear Hinge Pin Brace w/Inserts 5ive-B, 5ive-T

Genuine TLR spare/option part.Spare part for TLR/Losi 5ive-B, 5ive-T and Mini WRC.Contents:1 set

€69.99*

HW30104002 Hobbywing Ezrun MAX4-HV ESC Sensored 300 Amp, 6-12s LiPo, BEC 10A

The Ezrun Max4 controller is suitable for particularly large 1:4 and 1:5 scale models. This controller is ideal for use in any of these models, whether heavy-duty off-roaders or trucks. It is the ideal choice for high-end models that are subject to high demands or are operated aggressively. Despite the enormous size, care was taken to use high-quality and, above all, durable materials in the construction. This can be seen, for example, in the fact that the Max4 controller is excellently protected against dust, water and similar external influences. The electronic switch is also optimally protected against damage that could otherwise occur during a normal ride. In addition, the Ezrun Max4 has a built-in super high-current BEC that can provide a maximum output power of up to 25A. The output voltage can therefore be switched between 6V, 7.4V and 8.4V. The high-current BEC was developed to supply the latest high-current servos with sufficient power on request and thus to be able to precisely control the appropriate large models. Features - Super-strong switch mode BEC with a constant current of 10A, instant 25A and the ability to switch between 6, 7.4 and 8.4V - Fireproof circuits to protect the battery connector - Additional built-in protection mechanisms: undervoltage, overheating, signal loss, ... - Versatile programmability - Real-time data recording Technical data: Current (continuous/short) 300A / 2000A Motor type: Sensor/sensorless brushless motors Motor limit: 12S LiPo: kV <= 600 (70125 size) LiPo cells: 6-12S BEC: 6V / 7.4V / 8.4V with 10A (switchable) Fan: Yes (supply via built-in BEC) Programming input: Fan / PRG input Programming: LED programming card, LCD programming box, OTA programming module Size: 125x85x61.7mm Weight: 775.4g Application: 1/4 and 1/5 Heavy Duty-Off-Road, Trucks

€335.00*

TLR354001 TLR hinge pin, rear outer, TiCN coated, 5ive-T/2.0, TLR 5ive-B and Mini WRC

TLR hinge pin for Losi 5ive-T, TLR 5ive-B and Mini WRC, rear outer; TiCN (titanium carbon nitride) coated; approx 79.5 mm long.Direct replacement for stock hinge pin from the set LOSB 2080.Contents:2 pieces

€19.99*

23 products found for "cs_ke04001"

Filter products

rc-car-online - Home