305161 Shocks universal, 2 pcs.
€34.95
% €69.90 (50% saved)
Available
Product information "305161 Shocks universal, 2 pcs."
Shocks, universal 2 pcs.
Mounting hole distance: 173 mm
Travel: 56 mm
Diameter: 30 mm
Login
Accessories / Spare parts
Genuine HT spare/option part. Fits Carson Gas Devil/ Hell Devil 4x4. Not for Thunderbolt!.Measures:Inna diameter: 31,4 mmOuter diameter: 37 mmLength short spring: 103 mmCoils short spring: 8 StückLength long spring: 143 mmCoils long spring: 10 StückFront axle:VersionMeasuresColorItem N°GD012.3 x 103 mmyellowy0350/01GD022.4 x 103 mmredy0350/02GD032.6 x 103 mmbrowny0350/03GD042.75 x 103 mmbluey0350/04GD052.8 x 103 mmsilvery0350/05GD062.9 x 103 mmblacky0350/06Rear axle::VersionMeasuresColorItem N°GD072.3 x 143 mmyellowy0350/07GD082.4 x 143 mmredy0350/08GD092.6 x 143 mmbrowny0350/09GD102.75 x 143 mmbluey0350/10GD112.8 x 143 mmsilvery0350/11GD122.9 x 143 mmblacky0350/12HelpThe stock springs have 2.5 mm wire diameter. The Gas Devil / Titan shocks are factiry filled with silicone oil 500, which is slightly soft in rear and way to soft in front. In rear brown springs with oil in the 800 - 900 range or blue springs with 900 - 1000 range oil should be fine for bashing. In front blue springs and 1500 silicone oil are a good point to start from. Due to the size of the shocks you need two bottles of oil pes axle.Contents:2 pieces
Customers also bought
Item N° 305209, s054064 Fuel lines Carson / Smartech, setSet contents: 2 different fuel hoses, each approximately 50 cm long a) inner diameter 3 mm, outer diameter 4 mm b) inner diameter 5 mm, outer diameter 8 mm A total of 12 (6 each) various plastic hose holders and a fuel filter, approximately 30 mm long fits the hose with a 3 mm inner diameter
Genuine ATOP spare/option part.ATOP tie rod set with guide bushing set and with steel ball joints and turnbuckle center piece with locknuts for Losi 5ive-T.Balls with 6 mm bore diameter, adapter bushings for 5 mm screws, shortest distance between mounting points (center/center) 134 mm.Contents:2 pieces
Typical featuresLow inner resistance with high MPVHigher energy density with lower weightLonger lifecycle under proper usage, up to 200 timesFor LiPo batteries, the peak amp rate is usually twice the continuous crateCan be charged with 5C when time is criticalRecommended charge with 2CConnectors: EC5, XH-balancer. Spezification:Tension: 4S / 14,8VCapacity mAh: 5000Case: HartCable cross section: 12AWG/3,3Length +/- 5 mm: 137 mmWidth +/- 1,5 mm: 46 mmHeight: +/- 1,5 mm: 48 mmWeight +/- 10g: 548gCont. current: 60C (220A)Contents:1 piece
Rim with 18 mm square drive. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.1/6 monster truck tires, hard, glued on chromed FG Monstervrim. Outer Ø 210mm, width 120mm, fits FG Marder, Off-Road Buggy, Beetle and Monster cars. Fits other makes of 1/6 cars as well, wheel square size must be checked prior to installation. Installation of tires with a different diameter may require a change in gear ratio as well.Diameter 195 mm Width 120 mm 1 pair
Customers also viewed
Item N° y0656 Shocks for Bigscale cars 1/6 and 1/5, 173 mm long, 2 pcs.GD type extra high capacity shock for largescale cars. Shock comes complete with spring and is factory filled.Dimensions:Mounting hole distance (extended): 173 mmTotal length (extended): 190 mmTravel: 56 mmShock shaft diameter: 6 mmBody diameter: 30 mm
Genuine Smartech spare/option part.Please note: Color and design of Smartech springs and shock bodies may vary from batch to batch.Dimensions:Mounting hole distance: 127 mmTravel: 30 mmDiameter: 16 mmContent:2 pieces
Genuine Carson spare/option part. Contents:2 pieces
Item N° s054407 Rear shocks long, complete, 2 pcs.Mesaures:Spring length: 140 mmSpring inner diameter: 24 mmShock diameter: 22 mmBottom mounting hole distance: 170 mmRod end diameter top: 7,5 mm (without ball joints) bottom: 7,5 mm (without ball joints)
Mounting hole distance: 119 mmTravel: 21 mmDiameter: 16 mm
Product information "y1137/01 GPM-Big Bore Premium shock absorbers for FG, Carson/Smartech 2WD, set" Set consists of 4 shock absorbers. - 2 short dampers (slight signs of wear)- 2 long dampers (new)- Overall length, extended: long 155 mm, short 131 mm - Mounting distance, extended: long 144,5 mm, short 120,5 mm Premium version, suitable for FG, Carson / Smartech etc. Fully assembled and filled. Special features: 16 mm inner diameter for higher oil volume Volume equalisation Housing and screw connections made entirely of aluminium Hard anodised housing Precision piston made of Delrin, machined (no moulded part!) Aluminium piston rod base and aluminium spring plate Replaceable bearing bushes in the mounting eyes Pre-filled with 1000 silicone oil. For the following models: FG 2WD: Marder, Off-Road Buggy, Beetle, Monster Beetle Carson 2WD: Comanche, Attack Evo, CRT, CPT, Smartech monster truck Set contents: Two long and two short dampers.We recommend our progressive off-road tuning shock absorber springs from the "Dirt-Spring M" series for the shock absorbers. The original springs can also be used on FG models! Silicone oil recommendation: The GPM-Spezial Cross shock absorbers are filled with silicone oil viscosity 1000. This viscosity provides very good damping properties at normal outside temperatures. If softer damping is required, oil with a viscosity of 500 or 600 is recommended; for harder damping, 1500 or higher. One 50 ml bottle is sufficient for five long or six short dampers.
Genuine FG spare/option part. The Killer tires are glued on genuine 1/6 scale FG buggy rims with extension ring! Suitable for all 1:6 Off-Road models, Monster and Stadium Trucks. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.This Killer tire is distinguished through a lot of grip and a long durability. Diameter x width: 165 x 65 mm.Rim with 18 mm square drive.Content:2 pieces