273 products found for "at_dbxl005"

rc-car-online - Home

AT-DBXL005 ATOP aluminum steering servo horn 15T, double-sided for Losi DBXL/DBXL-E

Genuine ATOP spare/option part. CNC-machined from 6061 aluminum, significantly stronger and more rigid than any plastic version. Doule-sided anodized aluminum servo horn with 15T spline. Three M4 threaded holes per side. Fits:Savöx 0236 MGSavöx 0235Losi 900and many other servos with 15T / 8mm spline shaftContents:1 piece

€16.90*

AT-DBXL002 ATOP aluminum camber rods/steering rods for Losi DBXL/DBXL-E

Genuine ATOP spare/option part. Camber rods for Losi DBXL with center section cnc-machined from 6061 aluminum by ATOP. High grade all-metal ball joints at the pivot points provide zero backlash and strength. Fits front and rear.Attention: On a DBXL-E 2.0 these rods can only be used as camber rods, not as steering rods! Dimensions: Hole to hole: 117mm Total length: 135mm Contents:2 pieces

€34.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

AT-DBXL006 ATOP aluminum front chassis brace for Losi DBXL/DBXL-E

Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum front chassis brace for Losi DBXL/DBXL-E. Compared to the stock plastic part the higher strength of the aluminum part noticeably increases the chassis rigidity.Contents:1 piece

€24.90*

AT-DBXL007 ATOP aluminum rear chassis brace for Losi DBXL/DBXL-E

Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum rear chassis brace for Losi DBXL/DBXL-E. Compared to the stock plastic part the higher strength of the aluminum part noticeably increases the chassis rigidity.Contents:1 piece

€27.90*

AT-DBXL009 ATOP Front shock tower for Losi Desert XL/XL-E +MTXL

Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum front shock tower for Losi DBXL. Direct replacement for the stock part.Contents:1 piece

€59.90*

AT-DBXL008 ATOP aluminum front top chassis brace for Losi DBXL/MTXL

Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum front top chassis brace for Losi DBXL/MTXL. Stiffer than the stock plastic part the aluminum brace reduces chassis tweak in the area of the steering assy.Contents:1 piece

€27.90*

AT-DBXL025 ATOP aluminum front top chassis brace for Losi DBXL-E 2.0

Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum front top chassis brace; fits Losi DBXL-E 2.0 only.Stiffer than the stock plastic part (from set # LOS251097), the aluminum brace reduces chassis tweak in the area of the steering assy. Contents:1 piece

€34.90*

AT-DBXL004/02 ATOP aluminum steering servo horn for Losi DBXL/DBXL-E 18 teeth

Genuine ATOP spare/option part. CNC-machined from 6061 aluminum, significantly stronger and more rigid than any plastic version. Single-sided anodized aluminum servo horn, available in 18t spline version. Three M4 tapped holes for the linkage. 18T fits:Spektrum DBXL-servo SPMS901Contents:1 piece

€14.90*

AT-DBXL 015 ATOP Lower front- and rear alloy a-arms for Losi Desert XL/XL-E / 2.0

Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum suspension arms for Losi DBXL. Set of four a-arms with plastic bushings for the hinge pins, all required nuts and bolts are included.Contents:2 pieces

€79.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

AT-DBXL003 ATOP aluminum throttle/brake servo horn for Losi DBXL/DBXL-E

at_dbxl003 Version: AT-DBXL003-02 with 18 teeth

Genuine ATOP spare/option part. CNC-machined from 6061 aluminum, significantly stronger and more rigid than any plastic version. Doule-sided anodized aluminum servo horn, available in 15T and 18t spline version. Three smooth 2.5 mm holes per side. 15T fits:Savöx 0236 MGSavöx 0235Losi 900and many other servos with 15T spline shaft18T fits:Spektrum DBXL-servo SPMS901Contents:1 piece

€14.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

AT-DBXL001 ATOP Alloy spring retainer for Losi DBXL/XL-E +MTXL shocks

Genuine Atop spare/option part. Two pieces CNC-machined 6061-T6 aluminum spring perches for Losi DBXL. Direct replacement for the stock part (from set. # LOS 253006).Content:2 pieces

From €16.90*

Details

AT-DBXL021 ATOP Aluminum front transmission mount for Losi DBXL/DBXL-E/2.0 + MTXL

Genuine ATOP spare/option part. Front transmission mount for Losi DBXL cnc-machined from 6061 aluminum by ATOP.Through the use of aluminum, the problem of torn out threads (incl. the front bumper installation) is eliminated. At the same time the chassis section under the transmission is strengthened and the mounting points for the shock towers are reinforced.Comes with all mounting screws included.This is the new ATOP version with the additional mounting points between transmission housing and transmission bracket for a more secure connection of these parts.Old and new versions are fully compatible, regardless of whether they are made of aluminum or plastic. The parts therefore fit all versions of DBXL and MTXL in any combination.However, the use of the additional mounting points requires the new version of both transmission housing and bracket!Contents:1 piece This article is identical to the article in the video!

€79.90*

DBXL017 ATOP Aluminum front chassis brace for DBXL-E 2.0

Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum front chassis brace for Losi DBXL-E 2.0.Compared to the stock plastic part (from set # LOS251100) the higher strength of the aluminum part noticeably increases the chassis rigidity.Contents:1 piece

€29.90*

AT-DBXL002/01 ATOP Spacer bushings for camber/steering rods of Losi DBXL and DBXL-E

Genuine ATOP spare/option part. Aluminum spacer bushings for the ball joints on camber and steering rods of Losi DBXL and DBXL-E.Content:8 pieces

€9.80*

DBXL006/007 ATOP Front- and rear chassis brace, full set, for Losi DBXL/DBXL-E

Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum chassis braces for Losi DBXL/DBXL-E. Compared to the stock plastic part the higher strength of the aluminum part noticeably increases the chassis rigidity.Contents:2 pieces

€44.90*

AT-DBXL030 ATOP aluminum rear chassis brace small for Losi DBXL 2.0

Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum small rear chassis brace, only for Losi DBXL 2.0.Compared to the stock plastic part (from set # LOS251116) the higher strength of the aluminum part noticeably increases the chassis rigidity.Contents:1 piece

€36.90*

AT-DBXL031 ATOP aluminum rear chassis brace large for Losi DBXL 2.0

Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum large rear chassis brace, only for Losi DBXL 2.0.Compared to the stock plastic part (from set # LOS251116) the higher strength of the aluminum part noticeably increases the chassis rigidity.Contents:1 piece

€54.90*

DBXL023 ATOP Aluminum/steel differential case for DBXL/XL-E/XL-E 2.0

Genuine ATOP spare/option part. Two-part differential housing made of aluminum with steel bearing shield. The one-piece steel end shield ensures greater stability compared to aluminum end shields with a pressed-in bushing.Fits all differentials in all DBXL and DBXL-E versions!The delivery includes gaskets and O-rings, screws, ball bearing and sliding blocks.Contents:1 piece

€59.90*

AT-DBXL020 ATOP Complete Aluminum transmission case front / rear for Losi DBXL/DBXL-E/2.0 + MTXL

Genuine ATOP spare/option part. CNC-machined 6061 aluminum transmission case by ATOP, fits front and rear.Service life of ball bearings and ring & pinion will greatly benefit from the increased strength of this aluminum case. Comes with all mounting screws included.This is the new ATOP version with the additional mounting points between transmission housing and transmission bracket for a more secure connection of these parts.Old and new versions are fully compatible, regardless of whether they are made of aluminum or plastic. The parts therefore fit all versions of DBXL and MTXL in any combination.However, the use of the additional mounting points requires the new version of both transmission housing and bracket!Contents:1 piece This article is identical to the article in the video!

€139.90*

AT-DBXL029 ATOP Aluminum front chassis brace for DBXL 2.0

Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum front chassis brace, for Losi DBXL 2.0.Compared to the stock plastic part (from set # LOS251115) the higher strength of the aluminum part noticeably increases the chassis rigidity.Contents:1 piece

€34.90*

DBXL023/3 ATOP Aluminum/steel differential case for DBXL/XL-E/XL-E 2.0, set of 3

Genuine ATOP spare/option part. Set of 3!Two-part differential housing made of aluminum with steel bearing shield. The one-piece steel end shield ensures greater stability compared to aluminum end shields with a pressed-in bushing.Fits all differentials in all DBXL and DBXL-E 2.0 versions!The delivery includes gaskets and O-rings, screws, ball bearing and sliding blocks.Contents:3 pieces

€149.90*

DBXL018/019 ATOP Aluminum rear chassis brace 1+2 for DBXL-E 2.0

Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum rear chassis brace 1 + 2 for Losi DBXL-E 2.0.Compared to the stock plastic part (from set # LOS251100) the higher strength of the aluminum part noticeably increases the chassis rigidity.Contents:1 set

€69.90*

AT-DBXL034 ATOP Aluminum servo saver for Losi DBXL 2.0

Genuine ATOP spare/option part. Ballraced servo saver and steering assy, for Losi DBXL 2.0Replaces all plastic stock parts of the servo saver, no more tweaking even under high loads.Contents:1 piece

€99.90*

AT-DBXL014 ATOP Layshaft bearing flange for Losi Desert XL+MTXL

Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum intermediate transmission shaft bracket for Losi DBXL. The high strength of the material and the larger screws provide a secure seat for the bearings and add torsional rigidity.The set includes lager bearings (8 x 22 x 7) for higher load capacity and mounting bolts.Contents:1 piece This article is identical to the article in the video!

€28.90*

273 products found for "at_dbxl005"

Filter products

rc-car-online - Home