Tamiya spray paint PS-18 metallic purple
€4.89
% Regular price: €9.79 (50% saved)
Available
Product information "Tamiya spray paint PS-18 metallic purple"
The body shell should be degreased and cleaned before use. Best painting results are achieved when thin layers of paint are sprayed on from a distance of approx. 30 cm. Between two spraying processes the paint should dry slightly to avoid "tears".
Always follow the painting instructions of models and on the can.
Danger warnings:
- H222 Extremely flammable aerosol.
- H229 Container is under pressure: may burst when heated.
- H315 Causes skin irritation.
- H318 Causes severe eye damage.
- H335 May cause respiratory irritation.
- H336 May cause drowsiness and dizziness.
- EUH066 Repeated exposure may cause skin dryness or cracking.
Content:
- 100 ml spray can with spray head
Login
Accessories / Spare parts
Fits most spray cans from many manufacturers.Convert your spray can into a spray gun. The long-lever system of this handle makes using a spray can much more convenient and provides better flow rate control as well.No more dirty hands from paint work.Contents:1 piece
Genuine HT spare/option part. Schneider permanent marker, cap with clip and bullet tip. Dries quickly, water and wipe proof, black color.Recommended for marking and contour tracing on body shells.Lines can be easily removed with isopropyl alcohol or dry-cleaning naphtha.Contents:1 piecePainting tips:
Genuine HT spare/option part. Perfect surface preparation for paint jobs.Metal-free grinding fleece with a 1000, 1200 or a 1500 grit to roughen the inside of the body shell to improve paint adhesion. The flexible carrier of the fleece allows for a consistent, uniform contact with the work surface and makes it possible to prepare the polycarbonate to the smallest corner.Use it dry or wet when you rinse the body shell. The 1,500 grit (y0544//03) is especially recommended for metallic paint.Contents:5 pieces PadsPainting tips:
Genuine HT spare/option part. Perfect surface preparation for paint jobs.Metal-free grinding fleece with a 1000, 1200 or a 1500 grit to roughen the inside of the body shell to improve paint adhesion. The flexible carrier of the fleece allows for a consistent, uniform contact with the work surface and makes it possible to prepare the polycarbonate to the smallest corner.Use it dry or wet when you rinse the body shell. The 1,500 grit (y0544//03) is especially recommended for metallic paint.Contents:5 pieces PadsPainting tips:
Genuine HT spare/option part. Perfect surface preparation for paint jobs.Metal-free grinding fleece with a 1000, 1200 or a 1500 grit to roughen the inside of the body shell to improve paint adhesion. The flexible carrier of the fleece allows for a consistent, uniform contact with the work surface and makes it possible to prepare the polycarbonate to the smallest corner.Use it dry or wet when you rinse the body shell. The 1,500 grit (y0544//03) is especially recommended for metallic paint.Contents:5 pieces PadsPainting tips:
Genuine HT spare/option part.For masking of windows or various other locations in body shells that are not to be painted.Also ideally suited for templating patterns or shapes that are to be incorporated into the body to be painted .Contents:1 piece / 50 meters
Content: 5000 Zentimeter (€0.08 / 100 Zentimeter)
Genuine HT spare/option part.For masking of windows or various other locations in body shells that are not to be painted.Also ideally suited for templating patterns or shapes that are to be incorporated into the body to be painted .Contents:1 piece / 50 meters
Content: 5000 Zentimeter (€0.17 / 100 Zentimeter)
Ideal for masking fine lines or patterns. The masking tape for professionals! Also suitable for achieving clean, smooth edges when masking large areas. - 1 roll of 3 mm masking tape Ideal fo masking fine lines or patterns.
Content: 1000 Zentimeter (€0.80 / 100 Zentimeter)
Ideal for masking fine lines or patterns. The masking tape for professionals! Also suitable for achieving clean, smooth edges when masking large areas. - 1 roll of 6 mm masking tape Ideal fo masking fine lines or patterns.
Content: 1000 Zentimeter (€1.05 / 100 Zentimeter)
Ideal for masking fine lines or patterns. The masking tape for professionals! Also suitable for achieving clean, smooth edges when masking large areas. - 1 roll of 9 mm masking tape Ideal fo masking fine lines or patterns.
Content: 1000 Zentimeter (€1.25 / 100 Zentimeter)
Ideal for masking fine lines or patterns. The masking tape for professionals! Also suitable for achieving clean, smooth edges when masking large areas. - 1 roll of 12 mm masking tapeIdeal fo masking fine lines or patterns.
Content: 1000 Zentimeter (€1.45 / 100 Zentimeter)
Ideal for masking fine lines or patterns. The masking tape for professionals! Also suitable for achieving clean, smooth edges when masking large areas. - 1 roll of 3 mm masking tape - 1 roll of 6 mm masking tape - 1 roll of 9 mm masking tape - 1 roll of 12 mm masking tape Ideal fo masking fine lines or patterns. Also suitable to get cleaner and more precise edges when masking large areas.Contents:4 piece / 33 meters
Content: 1000 Zentimeter (€4.49 / 100 Zentimeter)
Genuine HT spare/option part. Scissors for cutting and detailing of Lexan bodies. Slim design makes preparing small holes easier. Slightly curved blades for smooth radius cutting (wheel housings for example).Contents:1 piece
Genuine HT spare/option part. Scissors for cutting and detailing of Lexan bodies. Slim design makes preparing small holes easier. Slightly curved blades for smooth radius cutting (wheel housings for example).Contents:1 piece
A nice tool to create clean circular cuts in Lexan bodies. Adjustable for diameters from 10 to 150 mm. Storage compartment with six blades.Inhalt:Circle cuttersix replacement blades
Customers also bought
Self adhesive backed.
Item N° Mielke 5097/1 Extension spring for Steel-Power, 3 pcs.Fits FG tuning pipes no. 6299/01 and 67298.
TAMIYA PS = Polycarbonate spray paints are specially developed for painting unpainted kit body shells. Numerous colour shades are available and allow the individual design of models. Each can contains 100 ml of highly opaque paint, which is oil and fuel resistant, allowing the use on nitro models.The body shell should be degreased and cleaned before use. Best painting results are achieved when thin layers of paint are sprayed on from a distance of approx. 30 cm. Between two spraying processes the paint should dry slightly to avoid "tears".Always follow the painting instructions of models and on the can. Danger warnings: H222 Extremely flammable aerosol. H229 Container is under pressure: may burst when heated. H315 Causes skin irritation. H318 Causes severe eye damage. H335 May cause respiratory irritation. H336 May cause drowsiness and dizziness. EUH066 Repeated exposure may cause skin dryness or cracking. Content: 100 ml spray can with spray headPainting tips:
Content: 100 Milliliter (€49.90 / 1000 Milliliter)
Customers also viewed
Genuine rc-car-online spare/option part.The optimal parking lot or race tires for your FG Racetruck an Offroad models with 18 mm Square mount.- On race trucks, the rim extension rings for the rear tyres must be glued on the inside. - On off-road models, the rim extension rings for the rear tyres are glued on the outside.Type Width Outer diameterFront 64 mm 153 mmRear 78 mm 153 mmGlued on original FG-Racetruck rims (rear tire with extension to the inside), incl. foam rubber insert,FG rim with 18 mm square drive and reinforcement ring.Attention: From experience we warn against using rims and extensions from another manufacturer.Since the Mammoth tires provide a very good grip, the rim and bonding are extremely stressed. Due to the high torque load in relation to the bonding of tires on large models, an occasional check in this regard and possibly a repair of the bonding (y0067) is inevitable.As a recommendation:The dirtier the track or the colder the temperature, the softer the rear tire should be.Reference for the front tire: With 2WD models this should be one to two stages harder than the used rear tire. On 4WD models, a tire combination with the same shore hardness front and rear is often good to drive.Of course, with Mammoth Supergrip Racetruck tires, the softer the tire, the higher the wear.The Mammoth Supergrip Racetruck tires have a special onroad tread. Whereby these still have an optimal grip after the wear of the tread, and can still be driven for a long time.