TT1021/03 Top Tuning Motor mount base plate

€29.90*

Available

Product number: tt_tt1021_03

EAN: 4058575109914

Product information "TT1021/03 Top Tuning Motor mount base plate"

Genuine Top Tuning spare/option part.

Spare part for electric conversion kit TT1021 or for your own designs.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Alternatives

TT1021 Top Tuning Electric conversion kit for Losi 5ive-T/B and Mini

Genuine Top Tuning spare/option part. All aluminum parts are made of 7075 alloy.Front motor mount design to assure ample clearance for the rear brake disc when running mechanical brakes.Accepts two batteries up to 150 mm long und 50 mm wide. The battery tray accepts batteries up to 164 mm long, but the motor pinion limits the max. length of one battery to 155 mm.Rear motor clamps:Diameter 57 mm i.e. for Tenshock or CastleDiameter 57,8 mm i.e. for Leopard 58 lineDiameter 60 mm i.e. for LehnerDiameter 70 mm i.e. for BP70120 ZTW Beast Brushless engine 620 kVPlease note: This set does not include Motor or ESCThis conversion kit is not intended for the 5ive-T 2.0, even though the installation in this vehicle would be feasible with some modifications (drilling and thread tapping required). The version for the 5ive-T 2.0 you can find here: TT1024. Driving batteries with the following maximum dimensions can be installed: Length: 165 mm Width: 51 mm Height: variable The speed controller (ESC) requires EC8 connections or corresponding ! Contents:Motor mount with your choice of rear clamp for 57 / 57.8 / 60 / 70 mm motor diameterBattery carrier plate made of 3 mm epoxy with aluminum brackets for the hook-and-loop tapes4 hook-and-loop tapes to secure the batteriesaluminum mounting pedestals for the battery plate16T pinion with 8 mm bore diameterMounting screws

€249.90*

Configure now

Customers also bought

TT1021/01 Top Tuning Motor mount

Genuine Top Tuning spare/option part. Spare part for electric conversion kit TT1021 or for your own designs.Bolt pattern: 4 x 30 mm pitch circle for M4 screwsDistance center of motor / base plate: 32 mmContents:1 piece

€24.90*

TT1021/02 Top Tuning Motor clamps

tt_tt1021_02 Version: TT1021/02B - Diameter 57,8 mm

Genuine Top Tuning spare/option part. Spare part for electric conversion kit TT1021 or for your own designs.Available with the following diameters:Diameter 57 mm i.e. for Tenshock or CastleDiameter 57,8 mm i.e. for Leopard Baureihe 58Diameter 60 mm i.e. for LehnerDiameter 70 mm i.e. for BP70120 ZTW Beast Brushless engine 620 kV, requires the taller TT1021/01B Top Tuning Motor mount for ZTW Beast motorDiameter 55,75 mmContents:1 piece

€29.90*

TT1021/01B Top Tuning Motor mount for ZTW Beast motor

Genuine Top Tuning spare/option part. Spare part for electric conversion kit TT1021 or for your own designs.Fits BP70120 ZTW Beast Brushless motor 620 kV.Bolt pattern: 4 x for M4 screws on 30 mm pitch circleDistance center of motor / base plate: 37 mmContents:1 piece

€39.90*

TT1021/12 Top Tuning Cable hook-and-loop tape 20x500 mm

Genuine Top Tuning spare/option part. Dimensions:Length: 500 mmWidth: 20 mmContents:2 pieces

€11.90*

y1303/21 EC5 Short circuit connector

Genuine HT spare/option part.Allows the use of a single 4S or 6S battery in a Losi Super Baja Rey / Rock Rey.Content:1 piece

€6.90*

Similar products

TT1021/06 Top Tuning Bracket for hook-and-loop tapes

Genuine Top Tuning spare/option part. Spare part for electric conversion kit TT1021 or for your own designs.Contents:2 pieces

€16.90*

TT1021/12 Top Tuning Cable hook-and-loop tape 20x500 mm

Genuine Top Tuning spare/option part. Dimensions:Length: 500 mmWidth: 20 mmContents:2 pieces

€11.90*

TT1021/11 Top Tuning Cable hook-and-loop tape 20x420 mm

Genuine Top Tuning spare/option part. Dimensions:Length: 420 mmWidth: 20 mmContents:2 pieces

€10.90*

TT1021/07 Top Tuning electric Motor pinion nitrided hardened, 8 mm bore, module 1.5

tt_tt1021_07 Version: TT1021/07B - Type B with 16 teeth+ 8EUR

Genuine Top Tuning spare/option part. Motor pinion made of nitrided hardened steel, module 1.5 and 8 mm bore. Reinforced hub for set screw M5x6. The pinions with odd tooth counts are profile shifted. Within the same outer diameter, there is no need to adjust the backlash when changing the pinion. When mounting on vehicles with mounting holes in the motor mount that are specific to the tooth count, the mounting holes for the higher number of teeth in each case (16 or 18) must be used.Profile regraded:This means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn´t really matter. Available in two sizes with two tooth counts:Outer diameter 30 mm with 17T or 18TOuter diameter 27 mm with 15T or 16TContents:1 piece

€15.90* €19.90* (20.1% saved)

TT1021/01B Top Tuning Motor mount for ZTW Beast motor

€39.90*

LOS251099/01 ZTW 300A ESC mounting bracket for DBXL-E 2.0

Genuine Losi spare/option part. The esc mounting bracket is equipped with an extremely strong double-sided adhesive tape for fixing the controller. Additionally the esc can be secured with the Top Tuning Velcro TT1021/12, which you can select from the shopping options.Compared to the standard plate, the support surface has been widened by 1mm, so that the ZTW 300A controller can be mounted ideally; slipping back and forth is securely avoided.Contents:1 set

€24.90*

TT1021/02 Top Tuning Motor clamps

tt_tt1021_02 Version: TT1021/02A - Diameter 57 mm

€29.90*

TT1025/01 Top Tuning adapter plate for ZTW 620KV motor in Losi DBXL-E 2.0

Genuine Top Tuning spare/option part. Motor adapter plate to mount the ZTW 620KV Beast motor into the Losi DBXL-E 2.0. The plate has four mounting holes, which should also be used due to the enormous torque of the ZTW motor. In order to install the screw at the l/h top position, at least 0.6mm material must be removed from the existing motor/differential mount. Contents:1 piece

€29.80*

TT1021/05 Top Tuning Pedestal for battery plate

tt_tt1021_05 Version: TT1021/05B - Type B

Genuine Top Tuning spare/option part. Spare part for electric conversion kit TT1021 or for your own designs.Contents:1 piece

€17.90*

TT1021/04 Top Tuning Battery plate

Genuine Top Tuning spare/option part. Spare part for electric conversion kit TT1021 or for your own designs.Contents:1 piece

€54.90*

TT1021/01 Top Tuning Motor mount

€24.90*

TT1024/01 Top Tuning Pedestal for battery plate for TT1024

Genuine Top Tuning spare/option part. Spare part for electric conversion kit TT1024 or for your own designs.Contents:1 piece

€24.90*