Receiver switch, BEC connectors, cs503024 - 1pce.

€7.70*

Prices incl. VAT plus shipping costs

Available

Product number: cs_503024

EAN: 4058575019107

Product information "Receiver switch, BEC connectors, cs503024 - 1pce."

BEC type connectors for both battery and receiver.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Alternatives

TT1000 Top Tuning Electronic 20 Amp Bigscale high voltage 30 Volt switch

Genuine Top Tuning spare/option part. Top Tuning The 20-amp Bigscale switch allows for a maximum input voltage of 30 volt. It is specifically designed as a receiver switch for use in combination with the Hitec HS-1005SGT servo and 4s receiver battery. The switch can also be used for other applications at your discretion with batteries up to 6S.Note: Top Tuning the electronic 20 amp Bigscale high voltage switch delivers the batterys full voltage. It does not replace a voltage regulator! The components which follow down the line (voltage regulator / servos / receiver) must be matched to this voltage! Using the latest MOSFET technology allows the 20 amp Bigscale high voltage switch to handle extreme loads, despite its small size. A blue LED status light clearly displays the activated mode. The 20 amp Bigscale high voltage switch is dust-and splash protected. He has an extremely low internal resistance and very low power consumption in off mode. Nevertheless it is recommended to unplug the battery when the model will not be used for an extended period. Properties:Voltage range: 3 to 30 VLoad: 20 ampsStandby consumption: 17 µAOperating temperature: - 15 ° C to +50 ° CCable length:Battery side 250 mmReceiver side 130 mmWeight: 13 gramsDimensions:Length: 29 mm Width: 13 mmHeight: 12 mmContents:1 piece

€39.90*

Details

y0210 Receiver switches, water protected, all conectors

Genuine HT spare/option part. Water protected receiver switches, silver plated contacts. Many different connectors to choose from.UniversalFGBECHigh currentContents:1 piece

€22.90*

Details

Similar products

TT1000 Top Tuning Electronic 20 Amp Bigscale high voltage 30 Volt switch

tt_tt1000 Connector: TT1000/01 Universal in - Universal out

€39.90*

Receiver switch, universal connectors, F1408 - 1pce.

Futaba / universal type connectors for both battery and receiver.

€9.90*

F003/2 Carson Universal On/Off Switch

Genuine Carson spare/option part. Contents:1 piece

€9.90*

6551 FG Receiver cable with switch FG/JR

Genuine FG spare/option part. Waterproof switch equipped with JR connector for receiver and FG gold contact connector for the receiver battery. Used to cut the power supply of receiver and battery. With fastening screw thread.Suitable for all radio control systems.Contents:1 piece

€31.40*

Details

y0314 Electronic high current receiver switch

schalter_elektronisch Battery connector: y0314/02 FG connector+ 5EUR

Genuine HT spare/option part.Electronic receiver switch, rated 5 A continuous / 15 A peak. This switch does not use mechanical contacts for the load, therefore it is less prone to failure caused by vibrations or dirt.The swith uses two separate connectors to distribute the load at the receiver terminals.With drilling template and mounting material.Contents:1 piece

Variants from €39.90*

€44.90*

80582 HPI Receiver Switch

Genuine HPI spare/option part.Contents:1 piece

€13.18*

Details

y0210 Receiver switches, water protected, all conectors

akku_0021 Battery connector: y0210/04 MPX old

Genuine HT spare/option part. Water protected receiver switches, silver plated contacts. Many different connectors to choose from.UniversalFGBECHigh currentContents:1 piece

€22.90*

Receiver switch, Multiplex connectors old, y0920 - 1pce.

Old version Multiplex type connectors for both battery and receiver.

€10.10*

6550 FG Switch for receiver cable

Genuine FG spare/option part. A switch which one well through a hole in the radio box and put on top and bottom can be secured with nuts.Contents:1 piece

€8.50*

Servo direct power supply cable with electronic switch, 1 pce.

servo_strom_mit Application: y0371 - 3 servos, battery connector FG+ 5EUR

Servo direct power supply cable with electronic switch, 1 pce.With this cable the servos get their current directly from the battery without straining the receiver circuit board.The integrated electronic receiver switch is rated 5 A continuous / 15 A peak. This switch does not use mechanical contacts for the load; therefore it is less prone to failure caused by vibrations or dirt. With separate charging connector.With drilling template and mounting material included.

Variants from €54.90*

€59.90*

Customers also viewed

500405224 Carson Upper front and rear tie-rod kit

Genuine Carson spare/option part. Contents:2 pieces

€39.99*

500405227 Carson Lower arms kit rear

Genuine Carson spare/option part. Contents:2 pieces

€39.99*

Receiver switch, Multiplex connectors old, y0920 - 1pce.

Old version Multiplex type connectors for both battery and receiver.

€10.10*

y1310 Hitec HS-1005SGT/HS-1100WP small mounting set for Losi 5ive-T, 2.0, 5ive-B and Mini

Fits 5ive-T 2.0 as well!Set includes:y1307 Aluminum servo horn Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WPy1308/01 Aluminum servo mount A Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WPy1308/02 Aluminum servo mount B Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WPy1309 All steel linkage steering servo/servo saver applicationy1307 Aluminum servo horn Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WP Losi 5ive-T, 5ive-B and MiniGenuine HT spare/option part.This extremely strong servo horn is specifically designed with dimensions for the installation of the Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WP high-performance servo in the Losi 5ive-T and Mini for steering application, but it can be used in other cars with this kind of servo.It bolts directly to the servos stock aluminum disk.The lever of this arm is longer than that of the servo saver. This gives you faster actuating speed of the steering.A linkage with a double-sided arm can only be done properly if all corresponding levers are the same length and the linkages run exactly parallel. If this is not the case, the servo and servo saver shaft will try to change the distance to each other with every steering movement . Thus, undesirable constraining forces.For this reason we decided to give preference to the single-sided arm.Scope of delivery:1 x Aluminium servo horn4 x Socket head cap screws 3 x 14 mm1 x Socket head cap screws 4 x 30 mm1 x Self-lockinghexagon nut M44 x Shim ring 3,2Contents:1 piecey1308/01 + y1308/02 Aluminum servo mounts Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WP Losi 5ive-T, 5ive-B and MiniGenuine HT spare/option part.These servo mounts allow for a simple and strong mounting of the Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WP high power servo for steering application.The massive servo mounts bolt to the chassis using existing mounting holes. The mount for the stock servo has to be cut off the radio plate. The aluminum servo mounts feature a pair of additional mounting holes to install a stock servo should ever the need arise. The rear mount bolts to the radio plate as well, providing additional support for the plate.Scope of delivery y1308/01:1 x Mount A2 x Socket head cap screws 3 x 16 mm2 x Countersunk screw 4 x 14 mm2 x Shim ring 4,2 mmScope of delivery y1308/02:1 x Mount B1 x Socket head cap screw 3 x 25 mm1 x Socker head cap screw 3 x 16 mm2 x Countersunk screw 4x14 mm2 x Shim ring 3,2 mmContents:1 sety1309 All steel linkage for Losi 5ive-T and Mini steering servo/servo saver applicationGenuine HT spare/option part.Very strong linkage with M6 steel ball joints.M6 threaded rod with lock nuts, balls with holes for M4 screws.Maximum length about 96 mm, but through cutting the M6 rod allows for a minimum length of 48 mm.Significantly stronger than the standard plastic version, and especially recommend when using the Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WP servo, this linkage can be used with "normal" servos as well.The threaded rod is not designed as a turnbuckle for a reason because there is not need to change the adjusted length for this application after installation. The setting accuracy of 0.5 mm (½ turn) means a maximum difference to the ideal length of 0.25 mm. This is always sufficient, the trim on the transmitter handles the final adjustment.On the other hand, a connecting rod with the same thread on both ends will always keep its setting when installed, even when both lock nuts are not tightened against the ball joints. Therefore reliability is higher.Set includes:2 x steel ball joints M62 x flat lock nuts1 x M6 x 60 mm threaded piece for Losi 5ive-T1 x M6 x 80 mm threaded piece for Losi 5ive-T 2.02 x spacer tubesContents:1 piece

€139.90*

y1099 Flex wing rc-car-online - 1 pce.

The flexible rear wing for FG and Carson / Smartech offroad cars, with reinforcement ribs on the underside.

€19.90*

DYNE1240 Dynamite Large Scale Safety Kill Switch

Genuine Dynamite spare/option part.Key Features:Kills your 2-cycle gas engine on command, loss of radio signal, low battery, or total battery power lossComes ready to install no soldering requiredOptically Coupled to isolate your ignition system from your radio systemBuilt-in LED for easy-to-spot operational status3-Channel Radio System RequiredNot Compatible with AVC-Equipped ReceiversContents:1 piece

€39.99*

Details

y1353 Battery box for 4 AA cells, choice of versions

y1353 Version: y1353/03 Battery Box with Universal connector+ 4EUR

This black plastic battery box accepts 4 AA cells, available with either BEC or universal connector.The universal connector version is also available with receiver switch.UniversalBEC

Variants from €4.90*

€8.90*