Mielke 5705/01 plug manifold for 5705

€39.50*

Prices incl. VAT plus shipping costs

Available

Product number: mielke_5705_01

EAN: 4058575112273

Product information "Mielke 5705/01 plug manifold for 5705"

Genuine Mielke spare/option part.

Original replacement part for Mielke no 5705 plug tuning pipe.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Accessories / Spare parts

y0757 Special exhaust manifold screw set, 5 pcs.

Cap screws for 1/5 & 1/6 large scale cars, DIN 912 - 8.8 M5x16 with corresponding external tooth lock washers DIN 679A.The lock washers prevent loosening of the manifold screws.Bag with five each screws and lock washers.Part is delivered in silver or black color from vendor!

€3.90*

y0758 Special exhaust manifold screw set, 5 pcs.

Cap screws for 1/5 & 1/6 large scale cars, DIN 912 - 8.8 M5x16 with corresponding spring washers DIN 127.The spring washer's tension prevents loosening of the manifold screws.Bag with five each screws and spring washers.Part is delivered in silver or black color from vendor!

€3.90*

y0564 RC Tech Pipe Protect 400 ml

Genuine HT spare/option part. RC Tech Pipe Protect protects your exhaust against oil and rubber deposit while racing. A clean exhaust gives better resonance, which means better performance from your engine. Thanks to RC Tech Pipe Protect your exhaust system can evacuate the temperature better.Direction of useSpray a relatively thick layer of Pipe Protect from a close distance; +/- 15/20 cm on your new or just-cleaned and preferably polished exhaust pipe. After each ride clean the exhaust pipe with a clean cloth, if necessary slightly sprayed with some Pipe Protect. Treat the exhaust pipe again before each race.Contents:1 piece / 400 ml

Content: 400 Milliliter (€24.75* / 1000 Milliliter)

€9.90*

y804 HT-flange sealer 518, 50 ml up to 200°C

Especially for installation of all engine gaskets. Temperature resistant from -55 °C to +200 °C. Resistant to water, mineral oils, synthetic lubricants, fuels, organic solvents and refrigerants. info: Hand tight: 10 - 20 minReady to use: 1 - 3 hoursGap fill: 0.5 mmContent: 50 ml Notes for usage: This surface seal is not for use as the sole sealant, it should always be applied in combination with a paper gasket.The HT-surface sealing agent should be sparsely applied over the entire surface, with care being taken that the sealant does not enter the devices internals (e.g. crankcase, differential a.s.o.) during the assembly.

Content: 50 Milliliter (€538.00* / 1000 Milliliter)

€26.90*

Similar products

Mielke 5099 O-ring 20 x 3 mm , 2 pcs.

Genuine Mielke replacement part.Set with 2 viton o-rings to seal the Masterfix connector from manifold to pipe. Isolates the pipe from engine vibrations.O-ring fits Mielke plug systems and FG #6299. Dimensions:Inner diameter: 20 mmOuter diameter: 26 mmThickness: 3 mm

€3.90*

Mielke Hurricane mounting hardware, 5062, set

Replacement installation kit for the Hurricane system.

€6.95*

5702 Mielke special Teflon gasket for all Masterfix systems

Special Teflon gasket, fits all Mielke Masterfix systems.Dimensions:Length: 19.4 mmInner diameter: 19.9 mmOuter diameter: 24.7 mm

€8.95*

Mielke 5082 Steel-Power manifold,

Original replacement part for Mielke.Inhalt:1 Stück

€39.90*

This product is currently not available.

5090/01 Mielke Mounting for FG-EVO-Models, Set

Item-No.: 5090/1Mounting for FG EVO-Modelle, Set

€29.90*

Mielke SOS gasket set / teflon tube, 5063, set

Spare parts for Mielke Side-Power tuned pipe.Part is delivered in white or black color from vendor!

€8.90*

Mielke 5096 tuned pipe sealing set, 2 pcs.

Original Mielke sealing set for tuned pipes.

€9.90*

Mielke 5059/01 Steel manifold Formula 1 fits RS5 models

Genuine Mielke spare/option part.Fits Mielke tuned pipe with the order number 5058.

€44.90*

5194 Mielke Cross-Power Mounting set

Mounting set for Cross-Power tuned pipe for Smartech UNO and Carson Attack

€24.90*

5185/01 Mielke Manifold for 5185 Big Power

Genuine Mielke spare/option part.Steel manifold, fit Mielke Big Power with the order number 5185. Contents:1 piece

€29.90*

Mielke Hurrican steel wool packing, 5093, 1 pce.

Replacement packing for the Hurrican system.

€5.90*

Mielke 5082/01 Hurrican plug manifold, set.

Original replacement part for Mielke no 5090 (New) Hurrican plug tuning pipe.

€39.90*

Customers also viewed

7117 FG Tuned pipe bracket - 1pce.

Is need for mounting all FG tuning pipes.Wire diameter 2 mm

€7.50*

7331/06 FG Silicone tube 14 x 3 x 40 mm

Genuine FG spare/option part. Spare part for: 7331 Silencer. Dimensions:Length: 40 mmOutside diameter: 20 mmInside diameter: 14 mmThickness: 3 mmContents:2 pieces

€6.90*

5090/01 Mielke Mounting for FG-EVO-Models, Set

Item-No.: 5090/1Mounting for FG EVO-Modelle, Set

€29.90*

TT0990 Top Tuning Failsafe with kill switch and status LED for all transmitters

Genuine TT spare/option part.The new and improved failsafe modul.This kill switch module works with most FM and 2.4 GHz rc-systems. Not compatible with AVC-equipped receivers! You must have a free channel on your rc-system in order to install the module! This means at least a 3-channel radio for standard 1-servo brake/throttle setups or a 4-channel radio for dual brake servos driven by the radio's mixer function. With this module you can stop the engine with your radio. Additionally the module features a failsafe function which stops the engine when the rx-battery's voltage drops below a certain level or the rc-system has a glitch. A kill switch module fulfils two tasks. On the one hand, as a safety device, it is intended to shut off an engine with magneto ignition in case of failure of the remote control, and on the other hand, the engine can be stopped at any time by remote control.While the latter is mainly used for convenience, the safety aspect is what really matters.The failsave circuit integrated in all modern remote controls may brake the vehicle in the event of a radio interference, but this feature is dependent on the basic functionality of the receiver system and its power supply. However, if the receiver, the gas servo or the power supply fails completely, the failsave of the remote control can no longer do its job. The vehicle may be running haywire at full throttle.In these cases, the kill switch will cut the ignition of the engine and the vehicle will roll out without power.Features:Ready to install no soldering requiredRemote LED for easy-to-spot operational status (ignition live/killed)Optically coupled to isolate the ignition from the radio systemThreshold value for undervoltage protection (4V, 5V, 6V) adjustable with jumpers allows adaptation to the rx-battery type (LiPo, LiFePo, NiMH, NiCd)Contents:1 piece

€34.90* €42.90* (18.65% saved)

903184/01 Clutch block carrier

Genuine Smartech spare/option part.

€6.90*

Exhaust manifold Samba Marder, 4115, 1 pce.

samba_4115 Version: Standart black/steel

€46.00*

This product is currently not available.

8114 FG Manifold f. tuning pipe 4WD, 1:5, 1pce.

Item N° 08114 Manifold f. tuning pipe 4WD, 1:5, 1pce.

€45.50*