LOSB 5972/01 Outer Axle Ball Bearings, 12 x 24 x 6 mm, Losi 5ive-T/2.0, TLR 5ive-B and Mini WRC.
€9.90
Available
Product information "LOSB 5972/01 Outer Axle Ball Bearings, 12 x 24 x 6 mm, Losi 5ive-T/2.0, TLR 5ive-B and Mini WRC."
Fits Losi 5ive-T, TLR 5ive-B and Mini WRC.
Content:
- 2 pieces
Login
Customers also bought
Genuine HT spare/option part. Soft trim for body shell edges and cut-outs. Use speed glue for installation.Contents:1 piece / 3 metersPainting tips:
Content: 300 Zentimeter (€4.97 / 100 Zentimeter)
Genuine HT spare/option part. Hardened special screws for mounting the beadlock rings of MadMax and Losi DBXL rims.For HPI rims due to the screw head diameter only to be used in combination with non-HPI beadlock rings (i.e. MadMax or Losi 5ive-T)!The combination of larger diameter and substantially larger thread depth ensures a secure grip of the screws in the plastic of the rims; the coarse thread also allows for quick assembly.The large head with T10 hexalobular drive distributes the load as wide as possible on the ring.The screws are galvanized for rust protection.Please note: it is not recommended to use the screws in rims which had previously M3 screws installed. With new rims or in exchange for M2.5 screws appropriate strength is ensured.Dimensions: Diameter: 3,1 mmLength: 12 mmHexalobular drive: T10 (Torx) Content:1 Set of 40 screws for one pair of rims.
Genuine Losi spare/option part.The set is for two tires (one pair).Content:1 set
Genuine HT spare/option part.Available as 272 high strength and heat resistant, 270/1 high strength or 241 medium strength.The strength of 272 and 270/1 is comparable, but 272 can handle temperatures up to 230°C vs. 150°C for 270/1. It is therefore the perfect choice for applications like exhaust or clutch pinion bolts. However, curing of 272 takes at least twice as long as 270/1.An excellent recommendation for removal of screws treated with threadlocking compound:CFH Diamant M50 Gasbrenner, y1007 Contents:1 piece / 10 gram
Content: 20 Gramm (€690.00 / 1000 Gramm)
Genuine Losi spare/option part. Contents:1 set
Genuine Losi spare/option part. The esc mounting bracket is equipped with an extremely strong double-sided adhesive tape for fixing the controller. Additionally the esc can be secured with the Top Tuning Velcro TT1021/12, which you can select from the shopping options.Compared to the standard plate, the support surface has been widened by 1mm, so that the ZTW 300A controller can be mounted ideally; slipping back and forth is securely avoided.Contents:1 set
Customers also viewed
The Reflex Wheel Pro III is the perfect choice for sport-level car, truck and boat drivers. Everything you need to bash around your backyard or local track. Proven performance, reliability and range from the Spektrum brand make the Reflex Wheel Pro III great for someone looking to get involved in RC surface or a great grab-and-go transmitter for the expert. Key FeaturesPerfect for sport level cars and boatsErgonomic gripServo reversingProven reliability from the Spektrum brandReflex Wheel Pro III 3-channel receiver includedInterchangeable grips (Medium grip included. Other grip sizes sold separately in Optional Accessories)Travel adjustProduct SpecificationsNumber of Channels: 2Modulation: DSMRBand: 2.4GHzReceiver: Reflex Wheel Pro III Receiver Battery Type: AAThis set contains:Reflex Wheel Pro III Top Digital Big-Scale Steering ServoTop Digital Big-Scal Throttle/brake servo y0425 Y-harness, universal connectorLOSB 9642 Global AC 6V Charger 2000 mAh 6V Battery with universal connectorWhen used in a FG 2WD car, adaptor plate 6118/02 is required for steering servo installation.
Genuine FG spare/option part. Heavy duty servos 2WD and 4WD 1/5 and 1/6 models. Ball-bearinged with metal gears.Speed: 0.22s-0.20s/60°Torque: 26 - 28kg/cmDimensions : 59,5 x 29,5 x 51,3 mmVoltage: 6.0-7.4VWeight: 154gContents:1 piece
Item N° LOSB2576Rear Bumper Brace Set 5T, 1 St.
Sintered steel clutch for Zenoah and many other rc-car engines from 23 cm³ to 32 cm³. incl. clutch spring!Note: The sintered steel clutch needs a break in period of at least half an hour run time after their first installation. Only then the clutch surface reaches the desired grip and provides the necessary friction. After that the clutch will show consistent operation and extremely low wear!With 80 grams the weight of the clutch is about the same as the usual OEM clutches.As with all non-adjustable clutches a periodic monitoring of the clutch spring is recommended. By changing the spring, it is also possible to match your car to the track conditions, i.e.: the harder the spring, the higher the stall speed of the clutch.If not on hand, for installation of the sintered steel clutch a clutch spring, the Zenoah screw set # 7318 and the original Zenoah clutch mount # 7315 are required!