LOS254031 Losi Pivot Balls and Rod Ends MTXL

€39.99*

Prices incl. VAT plus shipping costs

No longer available

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Product number: losi_los254031

EAN: 605482624999

Product information "LOS254031 Losi Pivot Balls and Rod Ends MTXL"

Genuine Losi spare/option part.

Contents:

1 set

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

LOS252120 Losi Axle Boot Set 5mm Drive Pins DBXL-E 2.0

Genuine Losi spare/option part. Contents:10 pieces

€29.99*

LOS254009 Losi Hinge Pin Brace Inserts, Set Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:1 set

€9.99*

LOS254006/01 Suspension Arm Losi DBXL 1/5 4WD

Genuine Losi spare/option part. Content:1 piece

€16.90*

LOS252064 Losi Pinion Gear, 13T, 1.5M, 8 mm Shaft

Genuine Losi spare/option part. Contents:1 piece

€19.99*

LOS352009 Losi Wheel Nut, Captured, Black, DBXL-E 2.0

Genuine Losi spare/option part. Contents:4 pieces

€39.99*

LOS252125 Losi Universal Rebuild Kit, 4,6mm Pin, DBXL-E 2.0

Genuine Losi spare/option part. Contents:2 pieces

€9.99*

LOS253027 Losi Shock Boot Set, DBXL-E 2.0

Genuine Losi spare/option part. Contents:4 pieces

€19.99*

LOS351018 Losi Front Top Plate, Aluminum, Black, DBXL-E 2.0

Genuine Losi spare/option part. Contents:1 piece

€39.99*

Details

Losi LOS250044 Body Set, Screened, DBXL-E 2.0

Genuine Losi spare/option part. Contents:1 set

€159.99*

LOS252127 Losi Diff Shims, 24x21x0.3mm, DBXL-E 2.0

Genuine Losi spare/option part. Contents:10 pieces

€9.99*

LOS252020 Universal Rebuild Kit (2): 1:5 4wd DBXL+MTXL

Genuine Losi spare/option part.Replacing the pins on DBXL drive shafts LOS252001, LOS252021, LOS252019: Remove set screw completelyOpen bench vise until the pin just fits between the jaws Position shaft on vice, held by a second person if necessaryDrive pin out with light hammer blows using a pin punch or a suitable comparable tool If Loctite was excessively used in the assembly, heating the shaft end may be required. Depending on the thread locking compound, you will strive for a value of 200 - 300°C. The shaft end must not be annealed! An annealed pin will mushroom on impact and make it very difficult to drive it out if not impossible. When installing the new pin from set LOS252020 make sure that the flat section of the pin is positioned under the set screw. The set screw should be just slightly tightened against the pin using high strength thread locker (link). Firm tightening puts the pin under preload and increases the risk of breakage!Contents:1 set

€11.99*

LOS254006 Losi Suspension Arm Set Losi DBXL/DBXL-E/DBXL 2.0 1/5 4WD

Genuine Losi spare/option part. Content:4 pieces

€59.99*