LOS254011 Turnbuckles, Set Losi DBXL 1/5 4WD

€69.99*

Prices incl. VAT plus shipping costs

Available

Product number: losi_los254011

EAN: 605482118177

Product information "LOS254011 Turnbuckles, Set Losi DBXL 1/5 4WD"

Genuine Losi spare/option part.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Alternatives

AT-DBXL002 ATOP aluminum camber rods/steering rods for Losi DBXL/DBXL-E

Genuine ATOP spare/option part. Camber rods for Losi DBXL with center section cnc-machined from 6061 aluminum by ATOP. High grade all-metal ball joints at the pivot points provide zero backlash and strength. Fits front and rear.Attention: On a DBXL-E 2.0 these rods can only be used as camber rods, not as steering rods! Dimensions: Hole to hole: 117mm Total length: 135mm Contents:2 pieces

€34.90*

Similar products

LOS254006/01 Suspension Arm Losi DBXL 1/5 4WD

Genuine Losi spare/option part. Content:1 piece

€16.90*

LOS252020 Universal Rebuild Kit (2): 1:5 4wd DBXL+MTXL

Genuine Losi spare/option part.Replacing the pins on DBXL drive shafts LOS252001, LOS252021, LOS252019: Remove set screw completelyOpen bench vise until the pin just fits between the jaws Position shaft on vice, held by a second person if necessaryDrive pin out with light hammer blows using a pin punch or a suitable comparable tool If Loctite was excessively used in the assembly, heating the shaft end may be required. Depending on the thread locking compound, you will strive for a value of 200 - 300°C. The shaft end must not be annealed! An annealed pin will mushroom on impact and make it very difficult to drive it out if not impossible. When installing the new pin from set LOS252020 make sure that the flat section of the pin is positioned under the set screw. The set screw should be just slightly tightened against the pin using high strength thread locker (link). Firm tightening puts the pin under preload and increases the risk of breakage!Contents:1 set

€11.99*

LOS254005 Losi Uprights Carriers/Spindles/Hubs Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:1 set

€39.99*

LOS254009 Losi Hinge Pin Brace Inserts, Set Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:1 set

€9.99*

LOS254006 Losi Suspension Arm Set Losi DBXL/DBXL-E/DBXL 2.0 1/5 4WD

Genuine Losi spare/option part. Content:4 pieces

€59.99*

LOS252127 Losi Diff Shims, 24x21x0.3mm, DBXL-E 2.0

Genuine Losi spare/option part. Contents:10 pieces

€9.99*

LOS252064 Losi Pinion Gear, 13T, 1.5M, 8 mm Shaft

Genuine Losi spare/option part. Contents:1 piece

€19.99*

LOS253006 Losi Spring Cups/Clips/Shock Ends Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:1 set

€29.99*

LOS253008 Losi Shock gaitors Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:4 pieces

€19.99*

LOS252065 Losi Pinion Gear, 14T, 1.5M, 8 mm Shaft

Genuine Losi spare/option part. Contents:1 piece

€19.99*

LOS252058 Losi Engine mount w/Adapter, Black, DBXL-E/2.0

Genuine Losi spare/option part. Contents:1 set

€79.99*

LOS252061 Losi Center Diff Spur Gear, 48T, DBXL-E

Genuine Losi spare/option part. Contents:1 piece

€49.99*

Customers also viewed

y1388 Offroad tuning springs Dirt-Spring DBXL/XL-E +MTXL

y1388 Version: y1388/01 - 2,5 x 110 mm Ocher, 1 pair

Genuine HT spare/option part. Fits Losi Desert Buggy XL stock shocks.The Desert Buggy XL stock springs use a high preload, which is even bigger than the shocks travel. This means that the stock spring action increases not that much going through the available suspension travel. To handle hard impacts high viscosity oil is used in the shocks; however, this oil is too heavy for these springs for a proper rebound. A sensible suspension tuning becomes much pretty difficult.For this reason, the tuning springs Dirt-Spring Desert Buggy XL are shorter than the stock springs, but also use heavier gauge wire in return. Therefore the change in spring action during the suspension travel is noticeably higher than the preload; the suspension settings can be influenced more effectively.Due to their different characteristics the stock springs are difficult to be sorted among the line of the tuning springs.As a rule of thumb theyre similar to the 2.7 mm version when used with the current 2000 viscosity oil factory fill.Dimensions:Inner diameter: 35 mmFree length: 110 mmNumber of turns: 9Versions:y1388/01 - 2,5 x 110 mm Ochery1388/02 - 2,6 x 110 mm Bluey1388/03 - 2,7 x 110 mm Greeny1388/04 - 2,8 x 110 mm Silvery1388/05 - 2,9 x 110 mm Whitey1388/06 - 3,0 x 110 mm Goldy1388/07 - 3,2 x 110 mm Pinky1388/08 - Complete set, unit prices: 132,93 EUR / Offer price: 89,99 EUR

€21.99*

LOS251096 Losi Turnbuckle Set for DBXL-E 2.0

Genuine Losi spare/option part. Contents:6 pieces

€59.99*