FG Sportsline 2WD-530 Electric BMW 320si up to 200A/8S

The 2WD-465 Sportsline model is built on the short chassis with double a-arms suspension front and rear. The vehicle is equippedwith the 2-shocks front suspension as standard, which ensures optimum traction for both front wheels.On the GT2, the front axle has been widened to 384 mm. The rear axle is 395 mm wide.Technical description:The model has a 465 wheelbase. The models are built on a 4mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in. Further equipment points are front disk brakes, differential gear, easy-running FG ball drive, alloy brake calliper with big brake disk, stabilizer bar front and rear, tuned pipe muffler, rear brace, 24T steel pinion, spark plug cap suppression cover, latest version (Evo) oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings. You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The models are equipped with a powerful 23ccm combustion engine. The engine needs a 2-stroke petrol oil mixture. One tank filling gives you about 45 minutes driving fun. The power is transmitted over the well-tried system: from the engine over the 2-block clutch over radial tooth wheels on to the rear axle which is equipped with the bevel differential gear with pluggable axles. RC-plate with receiver box.To complete the models all merchantable servos and radio control systems are suitable. The RTR version comes with complete factory installed rc-system, including Ni-Cads! The car comes with an unpainted body shell.The FG 5164 decor sheet is not included!Also available painted in the shop selection!Dimensions: Length: 840 mm Width: 395 mm Height: 250 mm Wheelbase: 465 mm Touring cars in action!Painting tips:

The FG Touring and Sports cars at scale 1:5 are known for their high quality and very detailed bodyshells true to original. Also the technically fully developed chassis are worth mentioning. These models are now available with a high-torque brushless engine. Surface conditions with maximum grip assumed speeds above 100 km/h can be reached and steered controlled. E stands for electric power which is equivalent to extremely high torque, high speed and all this without any engine noise. The Sportsline models are equipped with a powerful brushless engine and a Brushless ESC. This control can be regulated simply via transmitter or optionally via the program card.T2M standard equipment brushless motor and ESC:   - ESC 150A controller 6S   - Brushless motor 6S  You can order a motor/ESC combination with 8S for an additional charge.  - ESC 200A, 3-8S LiPo, BEC 8A   - Brushless Motor 8S You can select the car with complete RTR-equipment from the options menu. RTR equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. All E-Power versions need for the final assembling LiPo batteries and the suitable charger. For an unproblematic mounting we recommend to use LiPo batteries with a max. length 150mm and a width of 50mm. The model is delivered with an EC8 connector system.

The legendary 1/6 FG Marder 2WD Off Road Buggy! For many years the ideal entry into the elite class of radio controlled cars! The large-scale car with tough 26 cc engine is operated with normal 2-stroke gas. A 800 cc tank gives almost an hour of driving fun! For the FG Marder theres a wealth of option parts, most of them are not exactly a must, but make infinitely more fun! The FG Marder is also available with completely installed remote control. Just fuel up, start the engine and drive off.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Features:The model is built on an angled 4 mm chassis plate. All screws on the bottom are countersunk with no protruding heads. Double a-arms front and rear axle with 4 high volume oil-filled shock absorbers ensure optimum traction.All rotating parts are supported by ball bearings. Secondary spur gears, bevel gears inside the differential and all drivetrain parts are case-hardened. Rocker panels protect the car against contamination from below. The model is equipped with a powerful 26 cc engine. It needs a regular 2-stroke petrol/oil mix (available at every gas station). The integrated pull starter allows for easy engine starts without additional equipment.Dimensions: Length: 690 mm Width: 420 mm Height: 270 mm Wheelbase: 475 mm

The FG Touring and Sports cars at scale 1:5 are known for their high quality and very detailed bodyshells true to original. Also the technically fully developed chassis are worth mentioning. These models are now available with a high-torque brushless engine. Surface conditions with maximum grip assumed speeds above 100 km/h can be reached and steered controlled. E stands for electric power which is equivalent to extremely high torque, high speed and all this without any engine noise. The Sportsline models are equipped with a powerful brushless engine and a Brushless ESC. This control can be regulated simply via transmitter or optionally via the program card.T2M standard equipment brushless motor and ESC, 6S - 150A controller up to 3-6S  - brushless motor 6S You can order a motor/ESC combination with 8S for an additional charge.- ESC 200A, 3-8S LiPo, BEC 8A - Brushless Motor 8SThe model is also available in our shop selection including complete RTR equipment! RTR equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. All E-Power versions need for the final assembling LiPo batteries and the suitable charger. For an unproblematic mounting we recommend to use LiPo batteries with a max. length 150mm and a width of 50mm. The model is delivered with an EC8 connector system.

The 2WD-465 Sportsline electric model is based on a short chassis (465 mm wheelbase) with double wishbones Rear and front axles built. The vehicle is factory equipped with the 2-damper front axle.E stands for electric power which is equivalent to extremely high torque, high speed and all this without any engine noise. The Sportsline models are equipped with a powerful brushless engine and a Brushless ESC. This control can be regulated simply via transmitter or optionally via the program card.In the unpainted version Version does not include a decal sheet!Features:The front axle of the GT2 was widened to 384 mm. The rear axle is 395 mm wide.Chassis short 465 with double wishbones on the rear and front axle completely assembled, ball bearings, differential gear, oil pressure shock absorber, multi-part unpainted polycarbonate body (item no. 05160L), white spoke rims, tires and tire inserts.T2M standard equipment brushless motor and ESC, 6S - 150A controller up to 3-6S  - brushless motor 6S You can order a motor/ESC combination with 8S for an additional charge.- ESC 200A, 3-8S LiPo, BEC 8A - Brushless Motor 8S The model is also available in our shop selection including complete RTR equipment! RTR features RTR = Ready to Run. The RTR version is delivered ready to drive and with the 2.4 GHz remote control installed.Decor set: selectable (included in the painted version)LiPo batteries and the appropriate charger are required for all versions of the electric models. We recommend using LiPo batteries with a maximum length of 150mm and a width of 50mm to ensure trouble-free installation. The model is supplied with an EC8 connector system.

The FG Touring and Sports cars at scale 1:5 are known for their high quality and very detailed bodyshells true to original. Also the technically fully developed chassis are worth mentioning. These models are now available with a high-torque brushless engine. Surface conditions with maximum grip assumed speeds above 100 km/h can be reached and steered controlled. E stands for electric power which is equivalent to extremely high torque, high speed and all this without any engine noise. The Sportsline models are equipped with a powerful brushless engine and a Brushless ESC. This control can be regulated simply via transmitter or optionally via the program card. T2M standard equipment brushless motor and ESC, 6S:  - 150A controller up to 3-6S  - brushless motor 6S You can order a motor/ESC combination with 8S for an additional charge.- ESC 200A, 3-8S LiPo, BEC 8A - Brushless Motor 8SYou can select the car with complete RTR-equipment from the options menu. RTR equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. All E-Power versions need for the final assembling LiPo batteries and the suitable charger. For an unproblematic mounting we recommend to use LiPo batteries with a max. length 150mm and a width of 50mm. The model is delivered with an EC8 connector system.

Fans of rock crawling, large-scale models, and Jeep® vehicles alike will be thrilled with the extreme detail and high-performance functionality of the SCX6 Jeep® JLU Wrangler 4WD RTR. At 1/6 scale, it takes Axial® off-road adventuring to a new level. Key Features The first ever Axial® 1/6 scale chassis design based on the proven SCX10 III Metal gear transmission comes configured for two speeds with high and low gears Includes AR90 Standard axles with a Heavy-Duty Spool Durable three-link front and four-link rear suspension setup provides optimal handling High-traction, 7" tall BFGoodrich® KM3 tires mounted on Black Rhino Primm 3-piece beadlock wheels Funktionen The first ever Axial® 1/6 scale chassis design based on the proven SCX10 III Includes AR90 "Standard" axles with a heavy-duty spool Metal gear transmission comes configured for two speeds with high and low gears Durable three-link front and four-link rear suspension setup provides optimal handling Replica V8 engine cover adds to the realistic appearance Spektrum DX3 2.4GHz DSMR® radio provides superior range, response, and interference resistance and is compatible with Smart technology Spektrum Firma Crawler 120A ESC feeds telemetry data to the DX3 transmitter in real time Includes a powerful Spektrum S905 Large Scale Metal Gear steering servo (also accepts larger 1/5 scale servos with the included adapter) Detailed Jeep® JLU Wrangler body with LED headlights and taillights provides exceptional scale looks High-traction, 7" tall BFGoodrich® KM3 tires are mounted on Black Rhino Primm 3-piece beadlock wheels Battery trays adjust to fit a wide range of battery sizes 2-Year limited warranty (see product manual for details) Axial Takes Scaling To A New LevelAt 1/6 scale, the ready-to-run SCX6 Jeep® JLU Wrangler 4WD brings a whole new dimension to RC crawling and Axial® engineers have done it right. Whether you're a fan of full-size Jeep® vehicles, rock crawling, large-scale models, or all of the above, you'll be thrilled by the amount of realistic detail and high-performance functionality found here.The SCX6 Jeep® JLU Wrangler 4WD takes Axial® "scaling" to the next level. Based on the proven SCX10 III, the SCX6 chassis might be considered its big brother. It's engineered for extreme durability and performance with AR90 axles. For optimal handling, the chassis has a three-link Panhard front and four-link rear suspension setup. The transmission offers high and low gears out of the box, with a Spektrum S614 Metal-Gear Servo included and installed for the two-speed linkage.While the 1/6 scale size allows more room for impressive detail, the SCX6 Jeep® JLU Wrangler 4WD still fits conveniently into the trunk of your car and most rock gardens and hiking trails provide plenty of exciting challenges to overcome. As you navigate the trails, you'll admire how well the Jeep® JLU Wrangler body reproduces its full-size counterpart. Even the most demanding Jeep® enthusiasts will appreciate the accuracy of the details molded throughout. When the sun goes down, LED headlights and taillights add even more realism.Massive, 7" tall BFGoodrich® KM3 tires provide excellent grip and ground clearance for dirt, rocks, and all other off-road surfaces. They're mounted on licensed Black Rhino Primm injection-molded, 3-piece beadlock wheels so that the tires can be removed and replaced easily without gluing. Forest, desert, lake, mountains...the SCX6 Jeep® JLU Wrangler 4WD is ready to go anywhere.With the included Spektrum DX3 radio, you'll enjoy the superior range, response, and interference resistance of exclusive DSMR® technology. Together with the installed Firma Crawler 120A Smart Sensored-Brushless ESC, it also comes ready to deliver the telemetry advantages of exclusive Spektrum Smart technology. Outfit the DX3 with the optional BT2000 Bluetooth module, download the free Spektrum Dashboard app to your smart device, and you're ready to use more Smart real-time telemetry without needing on-board sensors or modules.With its 1/6 scale size, popular Jeep® styling, and unstoppable Axial® engineering, the SCX6 Jeep® JLU Wrangler 4WD takes RC scaling to an exciting new level. Just add your choice of suitable battery and take on the rocks! SCX6 CHASSISAufbauend auf dem bewährten SCX10 III-Layout, hebt das SCX6 in 1:6 die Langlebigkeit, Funktionalität und Leistung durch Features wie dem Stahl-Chassis, Allradantrieb, Based on the proven SCX10 III layout, the 1/6 scale SCX6 takes durability, functionality, and performance to the next level with features that include a steel chassis, 4-wheel drivetrain, multi-link suspension, AR90 axles, oil-filled shocks, and more. TWO-SPEED METAL GEAR TRANSMISSIONOut of the box, the Axial® SCX6 Jeep® JLU Wrangler 4WD RTR is configured for two speeds with high and low gears. A Spektrum S614 Metal-Gear Servo is included for the two-speed linkage. 3-LINK FRONT/4-LINK REAR SUSPENSIONFor optimal handling, the SCX6 suspension features a durable three-link front and four-link rear setup. JEEP® JLU WRANGLER SCALE BODYThe Jeep® JLU Wrangler body mirrors its full-size counterpart, with many molded scale details throughout the interior and exterior that even the most demanding Jeep® enthusiasts will admire. LED headlights and taillights add to the realism after dark. SCALE ENGINE DETAILA replica V8 engine covers and protects the included Spektrum Firma Smart ESC while adding to the model's realistic appearance. SPEKTRUM DX3 2.4GHz DSMR® TRANSMITTERThe included Spektrum DX3 radio features exclusive DSMR® technology for superior range, response, and interference resistance. It's also fully compatible with the Smart telemetry potential provided by the vehicle's installed Spektrum Firma 120A Smart ESC. SPEKTRUM FIRMA CRAWLER 120A SENSORED BRUSHLESS SMART ESCThe factory-installed, waterproof Firma Crawler 120A Smart ESC delivers power and intelligence all-in-one no additional vehicle modules or links required. This brushless ESC gives your SCX6 Jeep® JLU Wrangler 4WD the ultimate drive while feeding important telemetry data straight to your DX3 transmitter in real time. SPEKTRUM S905 STEERING SERVOIncluded and installed, the waterproof Spektrum S905 Large-Scale Metal-Gear Servo produces impressive torque (537.72 oz-in at 6V, 555.50 oz-in at 7V) for responsive, dependable steering control. The chassis will also accept larger 1/5 scale servos, if desired, with the included adapter. BFGOODRICH® KM3 TIRESMassive, 7" tall BFGoodrich® KM3 tires provide excellent grip and ground clearance for dirt, rocks, and all other off-road trails. They're mounted to licensed Black Rhino Primm injection-molded, 3-piece beadlock wheels so that tires can be removed and replaced easily without gluing. MULTIPLE BATTERY MOUNTING LOCATIONSBattery trays are included on both the right and left sides of the chassis. You can install a single battery or add a second on the opposite side (using a parallel Y-harness, y0425/03) to extend run time. For the operation of the model still required are driving batteries and possibly a charger. Available in the selection in our online store.