FG Sportsline 2WD-530 Electric Audi RS5 up to 200A/8S

The FG Touring and Sports cars at scale 1:5 are known for their high quality and very detailed bodyshells true to original. Also the technically fully developed chassis are worth mentioning. These models are now available with a high-torque brushless engine. Surface conditions with maximum grip assumed speeds above 100 km/h can be reached and steered controlled.According to the installed fourwheel drive the models are easy to handle and to steer. E stands for electric power which is equivalent to extremely high torque, high speed and all this without any engine noise. The Sportsline models are equipped with a powerful brushless engine and a Brushless ESC. The models can be steered easily and smoothly thanks to the built-in all-wheel drive. The control can be regulated simply via transmitter or optionally via the program card. T2M standard equipment brushless motor and ESC:  - ESC 150A controller 6S  - Brushless motor 6SYou can order a motor/ESC combination with 8S for an additional charge.- ESC 200A, 3-8S LiPo, BEC 8A - Brushless Motor 8SYou can select the car with complete RTR-equipment from the options menu.RTR equipmentRTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed.All E-Power versions need for the final assembling LiPo batteries and the suitable charger. For an unproblematic mounting we recommend to use LiPo batteries with a max. length 150mm and a width of 50mm. The model is delivered with an EC8 connector system.

The Basic Kit is particularly intended for persons switching and differs from the Evo 2020 by not including the following parts: Engine Tuned pipe Body shell Rear wing Wheels Innovations of the, according to the manufacturer FG, the race model EVO 2020 to be expected in September 2020 Competition-OnRoad RC car with the latest technical developments. Latest version Improved - in numerous details! Unique among the large scale models. New stabilizer bar construction front and rear. Ball stabiliszers or frame stabilizers can be used (accessories). 10 mm thick chassis made of T7075 aluminium with cut-outs for weights (also under the tank) and grooves in the front area. This allows the vehicle to be perfectly adapted to the track or the driver. The engine is now again bolted to the chassis for more stiffness. Optimally designed wishbones on front and rear suspension. Reinforced and with toe-in adjustability, which is performed via aluminum wedges. Front upper wishbone for more adjustment possibilities. All gears with fine pitch.Since 1997, i.e. since the beginning of the 1:5 RC car scene, FG Modellsport has been represented with team drivers worldwide at national and international competitions. With the Competition-EVO series, FG won most world championships and almost all European championships. Content10 mm T7075 aluminum chassis plateAir filter / AirboxFront and rear hydraulic brakesDifferentialLarge volume shock absorbers, black anodized

Special offer price !  Including Mecatech Expert hydraulic brake on the front axle.Highlights News 2025Tuning aluminium lower wishbones, one-piece (front and rear) Tuning chassis plate black anodised and milled Tuning milled aluminium rear axle linkage for toe-in adjustment  Perforated tuning clutch bell Side flaps on the rear spoiler in carbon fibreHighlights Formel 1 Competition- Numerous aluminium parts such as front and rear bearings, damper linkage, engine mount, wishbone ends. - Uniball steel ball joints, which allow all possible adjustments of the front and rear axle- gear drive, which ensures high reliability and optimum function. Like all FG Competition models, the Formula Competition from FG is the most successful model of recent years. The experience gained from the competitions has been incorporated into the latest version. With FG gear drive, which is extremely smooth-running and provides more power reserves. With this version, FG Modellsport has certainly created a competition-ready model for the years to come that will seamlessly build on past successes. Highlights Aluminium wishbones FG Gear drive Aluminium rear axle plate FG Adjustable aluminium shock absorbers Aluminium servo saver with ball bearings 26 cc Zenoah engine Airbox Resonance pipe system Mecha. rear disc brakes 5 mm aluminium chassis  blackLexan bodyworkAnother improvement is the hydraulic disc brake in the front wheels. The chassis of the FG Formula 1 Competition is built on a 5mm aluminium chassis and all screws at the bottom of the chassis are countersunk. The front and rear axle carriers as well as the engine unit are connected to each other over the entire length of the chassis, so that almost the rigidity of a monocoque chassis is achieved. The engine is fixed in place using a quick-release fastener, making it possible to change the engine quickly. The rear axle is driven by several smooth-running spur gears and an FG ball drive on the rear axle. The clutch bell is held by a separate flange bearing to reduce the load on the crankshaft. The front and rear axle with versatile adjustment options such as camber, caster, etc. consists of aluminium wishbones at the bottom. Sturdy aluminium rear axle plates reduce wear on the rear axle and provide enormous driving stability. Four oil-pressure shock absorbers, which are actuated via a push-rod suspension, and stabilisers ensure optimum ground contact.The model is powered by a powerful 26 cc engine with airbox and resonance silencer.The chassis is supplied with tuning bowden cable brakes for the rear axles.Equipment of the FG Formula 1 Competition kit 5 mm aluminium chassis, 26 cm³ engine, intake noise filter, tuning resonance silencer, FG gear drive, ball drive, complete rear axle and front axle carrier unit with integrated quick engine mounting, double aluminium wishbone mountings, aluminium triangular wishbones at the bottom of the rear axle and front axle, front and rear aluminium steering knuckles, ball bearing servo saver, steering stops, pushrods, 4 oil pressure shock absorbers with aluminium shock absorber pistons or mechanical tuning brakes at the front and rear. Servo saver, steering stops, pushrods, 4 oil pressure shock absorbers with aluminium shock absorber pistons or mechanical tuning brakes front and rear, anti-roll bar for front and rear axle, 10 mm aluminium balls, polycarbonate body, polyamide front spoiler, receiver box, competition tyres with tyre inserts.  The models are supplied as a kit with assembly instructions. The body parts are made of crystal-clear polycarbonate for self-painting. These parts are not included and must be ordered or delivered separately if installation is required!To complete the models, you will also need: -  1 remote control system (transmitter, receiver) -  1 large servo for the steering (approx. 40 - 50 kg)-  2 servos for throttle/brake (approx. 20 - 30 kg)-  batteries and charger. IncludetZenoah 26cc engineClear bodyshell and polycarbonate spoilerMechanical brakes rearHydr. brakes frontDimensionsLength: 960mmWidth: 440mmHeight: 230mmWheelbase: 620mmFormular 1 models in action!Drive:2WDMotorization:GasRTR:Without RTRScale:1/5

The FG Touring and Sports cars at scale 1:5 are known for their high quality and very detailed bodyshells true to original. Also the technically fully developed chassis are worth mentioning. These models are now available with a high-torque brushless engine. Surface conditions with maximum grip assumed speeds above 100 km/h can be reached and steered controlled. E stands for electric power which is equivalent to extremely high torque, high speed and all this without any engine noise. The Sportsline models are equipped with a powerful brushless engine and a Brushless ESC. This control can be regulated simply via transmitter or optionally via the program card.T2M standard equipment brushless motor and ESC, 6S - 150A controller up to 3-6S  - brushless motor 6S You can order a motor/ESC combination with 8S for an additional charge.- ESC 200A, 3-8S LiPo, BEC 8A - Brushless Motor 8SYou can select the car with complete RTR equipment from the options menu. RTR equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. All E-Power versions need for the final assembling LiPo batteries and the suitable charger. For an unproblematic mounting we recommend to use LiPo batteries with a max. length 150mm and a width of 50mm. The model is delivered with an EC8 connector system.