DYNS2661 Losi Dynamite FUZE 160A BL WP 1/5th ESC, 8s control

€259.99*

Prices incl. VAT plus shipping costs

No longer available

Product number: dyn_dyns2661

EAN: 605482086353

This is the successor of the product:

SPMXSE1160 Spektrum Firma 160 Amp Brushless Smart ESC 3S-8S

€249.00* €269.99* (7.77% saved)

Continue to product

Product information "DYNS2661 Losi Dynamite FUZE 160A BL WP 1/5th ESC, 8s control"

Genuine Losi spare/option part.

Contents:

1 set

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

y1539 Leopard Hobby Multifunction LED Professional Program Box

Genuine Leopard Hobby spare/option part.This multifunction program box is for programming Leopard Hobby brushless ESCs and DYNS2661 Dynamite FUZE 160A BL WP 1/5th ESC, 8s control. Its friendly LED interface makes ESC programming easy and quick. Besides, its compact, portable and very applicable for field use.SpecificationsSize: 88 x 58 x 14mm（LxWxHWeight: 65gInput Voltage: 4.8-6V(a separate battery is needed for powering this program box when ESC has no built-in/external BEC)Contents:1 piece

€19.90*

Similar products

LOS252017 Axle Boot Set Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:10 pieces

€29.99*

LOS252009 Differential Rebuild Kit Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:1 set

€8.99*

LOS250055 Losi Wing, FOX Racing, DBXL-E 2.0

Genuine Losi spare/option part. Contents:1 piece

€29.99*

LOSA99172 Camber Gauge

Genuine Losi spare/option part. Contents:1 piece

€19.99*

LOS252006 Front/Rear Differential Outdrive Set Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:2 pieces

€29.99*

LOS250016 Body Set, Screened, black, DBXL-E

Genuine Losi spare/option part. Contents:1 set

€169.99*

LOS251012 Radio tray & gas tank mount Losi DBXL 1/5 4WD

Genuine Losi spare/option part. Contents:1 set

€59.99*

Details

LOS250019 Losi LED Light Bar set, complete, DBXL-E

Genuine Losi spare/option part. Contents:1 piece

€59.99*

LOS251045 Losi Wing Mount, Complete, DBXL-E

Genuine Losi spare/option part. Contents:1 set

€39.99*

LOS252001 Driveshaft & Axle Dogbone Losi DBXL 1/5 4WD

Genuine Losi spare/option part. Replacing the pins on DBXL drive shafts LOS252001, LOS252021, LOS252019: Remove set screw completelyOpen bench vise until the pin just fits between the jaws Position shaft on vice, held by a second person if necessaryDrive pin out with light hammer blows using a pin punch or a suitable comparable tool If Loctite was excessively used in the assembly, heating the shaft end may be required. Depending on the thread locking compound, you will strive for a value of 200 - 300°C. The shaft end must not be annealed! An annealed pin will mushroom on impact and make it very difficult to drive it out if not impossible. When installing the new pin from set LOS252020 make sure that the flat section of the pin is positioned under the set screw. The set screw should be just slightly tightened against the pin using high strength thread locker (link). Firm tightening puts the pin under preload and increases the risk of breakage!Contents:2 pieces

€39.99*

LOS251053 Losi Roll Cage, Flip, Complete, DBXL-E

Genuine Losi spare/option part. Contents:1 set

€119.99*

LOS252004/01 Differential bevel gears set Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:1 set

€32.90*

Details

Customers also viewed

HW30104002 Hobbywing Ezrun MAX4-HV ESC Sensored 300 Amp, 6-12s LiPo, BEC 10A

The Ezrun Max4 controller is suitable for particularly large 1:4 and 1:5 scale models. This controller is ideal for use in any of these models, whether heavy-duty off-roaders or trucks. It is the ideal choice for high-end models that are subject to high demands or are operated aggressively. Despite the enormous size, care was taken to use high-quality and, above all, durable materials in the construction. This can be seen, for example, in the fact that the Max4 controller is excellently protected against dust, water and similar external influences. The electronic switch is also optimally protected against damage that could otherwise occur during a normal ride. In addition, the Ezrun Max4 has a built-in super high-current BEC that can provide a maximum output power of up to 25A. The output voltage can therefore be switched between 6V, 7.4V and 8.4V. The high-current BEC was developed to supply the latest high-current servos with sufficient power on request and thus to be able to precisely control the appropriate large models. Features - Super-strong switch mode BEC with a constant current of 10A, instant 25A and the ability to switch between 6, 7.4 and 8.4V - Fireproof circuits to protect the battery connector - Additional built-in protection mechanisms: undervoltage, overheating, signal loss, ... - Versatile programmability - Real-time data recording Technical data: Current (continuous/short) 300A / 2000A Motor type: Sensor/sensorless brushless motors Motor limit: 12S LiPo: kV <= 600 (70125 size) LiPo cells: 6-12S BEC: 6V / 7.4V / 8.4V with 10A (switchable) Fan: Yes (supply via built-in BEC) Programming input: Fan / PRG input Programming: LED programming card, LCD programming box, OTA programming module Size: 125x85x61.7mm Weight: 775.4g Application: 1/4 and 1/5 Heavy Duty-Off-Road, Trucks

€335.00*

DYNS1665 Dynamite 1/5th Brushless Motor, 800kv

Genuine Losi spare/option part. Contents:1 piece

€249.99*

Details