Ball bearings for FG, sealed, diverse sizes

rc-car-online

€10.70*

Prices incl. VAT plus shipping costs

Available

lager_0003 Size

Product number: lager_0003.4

EAN: 4058575010227

Product information "Ball bearings for FG, sealed, diverse sizes"

Genuine HT spare/option part.

Dimensions:

Alloy differentials 15 x 28 x 7 mm
Plastic differentials 12 x 28 x 8 mm
Clutch bell(except standard Formula 1) 10 x 22 x 6 mm
Layshaft 10 x 19 x 7 mm
Wheel bearing 8 x 22 x 7 mm

Contents:

1 pair / 2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Alternatives

y19018 FG/Carson/Smartech 2WD ball bearing set, sealed, set

Contains all bearings for the specified FG-car.Complete ball bearing set for all FG touring and offroad 2WD cars (your choice of plastic or alloy diff case). Not suitable for WB535 Modelle.The set includes:wheel bearing, 8 pcs., 8x22x7 mmclutch bell bearing, 2 pcs., 10x22x6 mmlayshaft bearing, 2 pcs., 10x19x7 mmdiff bearing, 2 pcs., 12x28x8 mm for plastic diff case or 15x28x7 mm for aluminum diff case.

€69.90*

Details

Similar products

Ball bearings for FG, sealed, diverse sizes

lager_0003 Size: y19608-rs For clutch bell, 2 pieces+ 4.3EUR

Genuine HT spare/option part. Dimensions:Alloy differentials 15 x 28 x 7 mmPlastic differentials 12 x 28 x 8 mmClutch bell(except standard Formula 1) 10 x 22 x 6 mmLayshaft 10 x 19 x 7 mm Wheel bearing 8 x 22 x 7 mmContents:1 pair / 2 pieces

Variants from €10.70*

€15.00*

y0781 Dry-Fluid Extreme especially for RC-Cars, 20 ml

Dry lubricant instead of oilWe did not think that today its still possible to make a real improvement in lubricants!DryFluid Extreme is especially designed for remote control model cars, with the aim to maintain the functionality and durability of these little racers as long as possible or to even extend significantly.The effect of the new lubricants for shafts, bearings, guides and ball joints starts where other lubricants reach their limits. Low friction, high lubricity and minimal attractivity to dust or dirt were the main developmental targets. Recent findings in aerospace and automotive technology as well as the experience of RC car drivers are the mentors of innovation of this new lubricant.What is DryFluid Extreme RC-Cars?DryFluid lubricant is more of a solid lubricant than a classic fluid one. DryFluid is not a wax, not oiling, non-greasy and free of silicones. The use of dry particles, polymer lubricants and high-end lubricating fluids results in a previously unknown lubricity without binding dust and dirt. Ease of application and long-term effects of DryFluid Extreme will delight any modeler.DryFluid Extreme product featuresReduces the power losses of shafts, bearings and ball joint systems and guarantees a long life of the treated componentsLowest friction for smooth operation and wear reductionMultistage lubricant system with immediate and long-term lubrication effectsDoes not bind any dust or dirtExtremely good penetrating abilityHighest compatibility with all common materials like metals, plastics and rubberExcellent adhesion and corrosion protection propertiesThe use of DryFluid Extreme RC-CarsThe main effect of DryFluid Extreme is the reduction of friction and wear on shafts, bearings, guides and ball joint systems. The dry components do not bind any dust or dirt and ensure best possible long term lubrication effects.For best results the parts to be treated should be thoroughly cleaned and the fluid applied sparingly. Repeated use increases the long-term effect.Before use, shake bottle vigorously for a short time!Nanotec lubricant for joints, shafts, bearings and gears of rc-cars. Excellent long term lubrication effects. Use included put-on canula for fine dosing. Let dry for several minutes after application and close bottle tightly. Shake well before use Attention:Keep out of reach of children. Do not swallow. Avoid contact with eyes. Keep away from ignition sources. Keep bottle closed tightly.

Content: 20 Milliliter (€845.00* / 1000 Milliliter)

€16.90*

FG /Carson ball bearing set, shielded, set of 14

lager_0001 Version: y19600 For cars with plastic differential case

Contains all bearings for the specified car.Complete ball bearing set for all FG touring / offroad 2WD cars (not Formula 1) and all Carson 2WD large scale cars (offroad and touring cars).Your choice of plastic or alloy diff case.The set includes:- wheel bearing, 8 pcs., 8x22x7 mm- clutch bell bearing, 2 pcs., 10x22x6 mm- layshaft bearing, 2 pcs., 10x19x7 mm- diff bearing, 2 pcs., 12x28x8 mm for plastic diff case or 15x28x7 mm for aluminum diff case.

€26.20*

10411 FG Ball bearing set for F1

fg_10411 Version: 10411CO Competition sealed+ 5EUR

Genuine FG spare/option part. Suitable for Formula 1. The set contains all ball bearing which are necessary for one model.Contents:10411SL Sportsline:10411CO Competition:2x 8x16x6 mm4x 10x19x7 mm8x 8x22x72x 12x28x8 mm3x 8x16x5 mm4x 10x19x7 mm8x 8x22x7 mm2x 15x28x7 mm

Variants from €43.90*

€48.90*

y19018 FG/Carson/Smartech 2WD ball bearing set, sealed, set

lager_0002 Car: y19600-RS Version for plastic diff excepting F1

€69.90*

y0098 Ceramic ball bearings, sealed, set

y0098 Set content: y0098/1 - set of 6

Why ceramic? Besides corrosion and wear resistance ceramic balls are smoother and have a better shape stability; resulting in less drag from the bearing itself.Available sets: Set consists 6 bearings, includes bearings for FG clutch bell, layshaft and differential (alloy case only!).Set includes:2 pcs. 10x22x6 mm2 pcs. 10x19x7 mm2 pcs. 15x28x7 mmSet consists 14 bearings, includes all bearings from a standard FG-car (not Formula 1) with alloy differential.Set includes:8 pcs. 8x22x7 mm2 pcs. 10x22x6 mm2 pcs. 10x19x7 mm2 pcs. 15x28x7 mm

€92.30*

4411/06 FG bearing set with grease filling EVo/Competition

Genuine FG spare/option part. FG ball bearing with heat resistant grease filling up to 180°. Therefore essentially improved durability of the wheel bearings and the clutch bell.For all FG cars with alloy differential case except 4WD and Formula 1.Contents:Eight pieces: 8 x 22 x 7 mmTwo pieces: 10 x 22 x 6 mmTwo pieces: 10 x 19 x 7 mmTwo pieces 15 x 28 x 7 mm

€39.50*

4411/12 FG ball bearing set for Leopard 4 Competition, sealed, 23 pcs.

Genuine FG spare/option part.Fits too WB535 cars.Content:4 pieces: 6 x 15 x 5 mm5 pieces: 10 x 19 x 7 mm2 pieces: 10 x 22 x 6 mm6 pieces: 8 x 22 x 7 mm2 pieces: 17 x 26 x 7 mm4 pieces: 15 x 28 x 7 mm

€86.90*

y0781/01 Dry-Fluid "Gear Lube" for gears, 10/20 ml

y0781_01 Size: y0781/20 - 20 ml+ 8.1EUR

Dry lubricant instead of oil DryFluid Extreme Gear Lube is specifically designed for highly loaded gears in models. It is characterized by extreme pressure resistance and excellent adhesion. Through the use of solid lubricant components, it shows only a slight tendency for dust and dirt retention. Main applications of the newly developed Gear Lube Gear are of model helicopters, rc-cars and trucks, model trains and servos. Also ideally suited for shafts and gimbals of any kind.DryFluid lubricant is more of a solid lubricant than a classic fluid one. DryFluid is not a wax, not oiling, non-greasy and free of silicones. The use of dry particles, polymer lubricants and high-end lubricating fluids results in a previously unknown lubricity without binding dust and dirt. Especially the long-term effects of DryFluid Extreme will delight any modeler. Product characteristics at a glance: Exciting lubricating propertiesReduces power losses caused by friction Reduces operating noise Reduces wear Extremely pressure resistant Long-term stability Highest adhesion High material compatibility with metals, plastics and rubber materials Low tendency for dust and dirt binding Application Notes: A thin layer of the Gear Lube is enough for an extreme lubricating effect. If possible, apply to an upright standing gear and rotate it during the application. For hard to reach places and selective applications use the included canula. For fine and uniform distribution use a fine hair brush immediately after the application of Gear Lube. Transmissions that have not been treated with Gear Lube before should be thoroughly cleaned first. Shake well before using and apply sparingly!High End dry lubricant for highly loaded gears in models. Especially for transmissions of model helicopters, rc-cars, trucks, model trains and servos. Can also be used for shafts and gimbals of any kind Through the use of dry particles, lubricating polymers and high-end lubricating fluids an unprecedented lubricating effect is achieved. Extremely pressure-resistant and with excellent adhesion. Very low tendency for dust and dirt retention. Multistage dry lubricant system with long-term effects.

Content: 10 Milliliter (€2,500.00* / 1000 Milliliter)

Variants from €16.90*

€25.00*

4411/14 FG ball bearing set for 1/6 2WD, sealed, 14 pcs.

Genuine FG spare/option part.Fits too WB535 cars.Content:2 pieces: 10 x 19 x 7 mm8 pieces: 8 x 22 x 7 mm2 pieces: 9 x 22 x 6 mm2 pieces: 17 x 26 x 7 mm2 pieces: 12 x 28 x 8 mm

€51.70*

4411/16 FG ball bearing set for electro, sealed, 21 pcs.

Genuine FG spare/option part.Fits too WB535 cars.Content:2 pieces: 10 x 22 x 6 mm4 pieces: 6 x 15 x 5 mm3 pieces: 10 x 19 x 7 mm2 pieces: 17 x 26 x 7 mm4 pieces: 12 x 28 x 8 mm6 pieces: 8 x 22 x 7 mm

€53.90*

y0462 Ceramic - Hybrid bearings for FG 4WD tensioning pulley, 1 pcs.

Single spare parts to replacement number: y0460Ceramic ball bearings suitable for the aluminum and plastic shaft bearings of the clamping roller in the back tension roller housing for all 4WD models FGDimensions: 10 x 19 x 7 mm

€16.90*

Customers also viewed

4411/13 FG ball bearing set for 1/5 2WD, sealed, 14 pcs.

Genuine FG spare/option part.Fits too WB535 cars.Content:2 pieces: 10 x 19 x 7 mm2 pieces: 10 x 22 x 6 mm8 pieces: 8 x 22 x 7 mm2 pieces: 12 x 28 x 8 mm

€51.70*

4406/01 FG Alloy upright axially displaced left

Genuine FG spare/option part. One piece replacement upright left for 4406.Contents:1 piece

€57.10*

FG Fun Cross WB535 4WD Buggy

This 1/6 scale 4WD Off-Road buggy has been strongly inspired by competition types. With its front and rear Leopard type suspensions, the Fun Cross allows the most extreme drives. Built on a 4mm aluminium chassis, closed belt drive, 2 differential gears, double wishbones at front and rear axle with many adjusting possibilities as well as large-volume oil-pressure shock absorbers for traction and optimal ground contact. The model is equipped with a powerful 26 cm³ combustion engine with tuning pipe and ready oiled air-filter. The engine runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-start system the engine can be started without any difficulties. You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The RTR version is delivered with assembled and preset 2.4 GHz radio control system and rechargeable batteries. To complete the non-RTR version are all popular servos and radio control systems are suitable. Equipment of the model:Powerful 26 cm³ engineTwo differentials4 mm thick chassisFour wheel independent suspensionsBig Bore dampersDimensions:Length: 700 mmWidth: 460 mmHeight: 310 mmWheelbase: 535 mmWeight: 10,4 kg

€1,049.95*

6063/06 FG Ball bearing 12x28x8 mm sealed

Genuine FG spare/option part. Are used in all FG and Carson models for bearing the differentials with plastic housing.Contents:2 pieces

€11.90*

Ball bearings for FG, sealed, diverse sizes

lager_0003 Size: y19608-rs For clutch bell, 2 pieces+ 4.3EUR

Variants from €10.70*

€15.00*

y0464 Seal bearing set for the FG 4WD sportsline models, set

Complete seal bearing rate with 24 bearings for the FG Competition 4WD models. Quantity / Size / use4 pieces 6 x 15 x 5 mm - Front Pulley2 pieces 10 x 22 x 6 mm - Clutch Bell5 pieces 10 x 19 x 7 mm - layshaft / belt tensioner4 pieces 12 x 28 x 8 mm - Differential6 pieces 8 x 22 x 7 mm - wheel bearings2 pieces 17 x 26 x 7 mm - the inside front wheel bearingsTotal value of stock: 110,30 EUR

€74.90*

690000 FG Leopard 3 Competition 4WD

Der neue Allrad-Wettbewerbsbuggy Leo 3 ist mit drei Differenzialen ausgestattet. Diese neue Version ist von den 1/8 Wettbewerbsbuggys inspiriert. Durch die sehr direkte Kraftübertragung wird mehr Leistung generiert. Die Zentralbremse ist im Differential- Bock integriert. Das Modell ist mit einem Chassis aus gefrästem 5 mm T7075-Aluminium, großvolumigen Stoßdämpfern, ein Resonanzschalldämpfer und einer neuen aerodynamischen Karosserie ausgestattet. Der Motor (separat zu erwerben) wird in der Mitte mit einer Neigung zur Optimierung des Schwerpunkts eingebaut. Die Wartung dieses Modells wird durch einen schnellen Ausbau der einzelnen Teile erleichtert. Das Modell wird ohne Motor, Kupplung, Airbox und RC-Anlage geliefert.Abmessungen : Länge : 770mm Breite : 470mm Hohe : 330mm Radstand : 580mm Gewicht : 13.2kgNicht inbegriffen : Motor 26cc, 29cc Kupplung Airbox RC-Anlage

€3,499.00*