Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

B57020 Clutch bell holder

Product information "B57020 Clutch bell holder"

Dimensionally identical with Losi 5ive-T 1.0 part LOSB5036.

Contents:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Alternatives

Average rating of 0 out of 5 stars

LOSB5036 Losi Clutch Mount w/Bearings & Hard. (Assm) 5T and Mini
Genuine Losi spare/option part.Fits Losi 5ive-T and 5ive Mini.Dimensionally identical with B57020Content:1 piece

€49.99*

Average rating of 0 out of 5 stars

AT-5T019 ATOP aluminum clutch bell holder Losi 5ive-T and Mini
Genuine ATOP spare/option part. CNC-machined from 6061-T6 aluminum by ATOP. Open design for maximum clutch cooling and reduced weight. Larger 15x32x9 mm bearings for higher load capacity.Contents:1 piece

€54.90*

Similar products

Average rating of 0 out of 5 stars

B58004 HV2060MG Digital Servo (48-62kg)
Power 48 kg with a 6V battery, 62 kg with 2S LiPoDimensions: length 66 mm x width 30 mm x height 56 mmOutput shaft 15T splineContents:1 piece

€79.90*

Average rating of 0 out of 5 stars

B55002 C.hub spacer bushing
Dimensionally identical with Losi 5ive LOSB2074.Contents:4 piece

€12.90*

Average rating of 0 out of 5 stars

B69016 Front ball drive cup set
Contents:1 set

€14.90*

Average rating of 0 out of 5 stars

B56045 Screw for shock install M6x45mm
Dimensionally identical with Losi 5ive part LOSB2859.Contents:4 piece

€24.90*

Average rating of 0 out of 5 stars

B51016 Stabilizer bar mounting plate
Dimensionally identical with Losi 5ive part LOSB2562.Contents:4 piece

€9.80*

Average rating of 0 out of 5 stars

B55004/54003 Steering center link with bushings
Dimensionally identical with Losi 5ive-T 1.0 part LOSB2552.Contents:1 set

€14.90*

Average rating of 0 out of 5 stars

B55020 Wheel shaft
Dimensionally identical with Losi 5ive-T part LOSB3224.Contents:2 piece

€29.80*

Average rating of 0 out of 5 stars

B55061 Spark plug wrench
Contents:1 piece

€9.80*

Average rating of 0 out of 5 stars

B61039/55039/55040/55013 Stabilizer bar with linkage, front
Wire has same dimensions as Losi LOSB2562 (3.5 mm wire diameter), but links are BWS-specific.Contents:1 set

€19.90*

Average rating of 0 out of 5 stars

B61007/51027 Fuel tank bracket
Contents:2 piece

€14.90*

Average rating of 0 out of 5 stars

B69006 Engine protect cover
Contents:1 set

€32.90*

Average rating of 0 out of 5 stars

B61025 Throttle servo mount
For servos with a 75 x 18 mm mounting bolt hole pattern.Contents:1 piece

€12.90*

Customers also viewed

Average rating of 0 out of 5 stars

LOSB5036 Losi Clutch Mount w/Bearings & Hard. (Assm) 5T and Mini
Genuine Losi spare/option part.Fits Losi 5ive-T and 5ive Mini.Dimensionally identical with B57020Content:1 piece

€49.99*

Average rating of 0 out of 5 stars

y0726 Gas-nitrided tuning clutch bell for Losi 5ive-T/2.0/B and Mini
Gas-nitrided tuning clutch bell machined from high grade steel with a hole for easy clutch adjustment. Special vents remove dirt and clutch lining debris automatically, preventing it from accumulating in the clutch bell and causing premature wear to clutch bell and linings. They aid in cooling of the clutch bell as well.The clutch bell features a significantly reinforced wearing surface and face which guarantees dimensional stability even under high loads! The shaft is a tiny bit longer than stock (about 0.2 mm) to prevent the bearings from binding.Since this clutch bell is single-piece machined from bar stock there is no weld bead on the inside of the face plate. The gained space allows now to use the adjustable GPM Big Extreme clutch.Suitable for genuine slot drive Losi pinions. Comes with bolts and spring washers included.The bolt hole is countersunk from the inside so you can also use a flat head screw from the inside and a nut on the outside if you like. Content:1 pieces

€49.90*
%

Average rating of 0 out of 5 stars

y2003 Tuning front suspension set for nearly all FG 4WD Sportsline cars
y2003 Model: y2003/03 - FG 4WD Marder and FG touring cars with 510 mm wheelbase: Mini Cooper and Porsche GT3 RSR
Tuning front suspension set for all FG 4WD Sportsline cars: Monstertruck; Baja; Marder; Beetle; touring cars:Not fit Formular 1, Leopard and Truggy!y2003/01 fits:FG 4WD Monster-Truck models, Beetle.Part number:Name:y68412Aluminum front lower a-armsy2000Alu Querlenker Front unteny68413Aluminum front uprightsy0563Aluminum shock tower Monster-Truck/Beetley1036Rose joint for alloy wishboney2003/02 fits: FG 4WD Baja Buggy.Part number:Name:y68412Aluminum front upper a-armsy2000Aluminum front lower a-armsy68413Aluminum front uprightsy0578Aluminum shock absorber plate for Bajay1036Rose joint for alloy wishboney0579Alloy roll cage brackety2003/03 fits:FG 4WD Marder and FG touring cars with 510 mm wheelbase: Mini Cooper and Porsche GT3 RSR. When installing in a Porsche GT3 RSR or Mini Cooper 4WD with 510 mm wheelbase, the steering travel limiter must be installed into the first threaded hole of the knuckle arm and not at the standard location on the knuckle as in off-road cars!Part number:Name:y68412Aluminum front upper a-armsy2000Aluminum front lower a-armsy68413Aluminum front uprightsy0578Aluminum shock absorber plate for Bajay1036Rose joint for alloy wishbone

€469.90* €599.90* (21.67% saved)

Average rating of 0 out of 5 stars

TLR252012 TLR Clutch Mount, Aluminum 5ive-B
Genuine TLR spare/option part.Spare part for TLR/Losi 5ive-B.Contents:1 set

€74.99*
%

Average rating of 0 out of 5 stars

500304033D/2.0 Carson 1/5 Wild GP Drift Attack blue 2.4G RTR, 29cc engine, with all accessories
Carson Drift Attack 2.0 special equipment with 60 mm wide front and rear narrow-grip tyres!  The off-road tyre for sandy surfaces and spectacular drifts!The model includes the completely installed 2.4 GHz remote control, incl. transmitter alkalines, as well as a fail-safe system (automatic engine cut-off in case of possible malfunctions!), 20kg throttle servo and 35 kg steering servo, as well as a 2.000 mAh 6V receiver battery with charger and a tool set. Furthermore a spare air filter element and a special mixing canister. A detailed multilingual manual is also included.Technical details: - approx. 70 km/h top speed - 0 - 70 km/h approx. 2.5 seconds - With one tank of gas (700ccm) approx. 40 minutes driving time - 29cc engine, with pull starter - Sound reducing tuned pipe exhaust system - 2-shoe clutch with steel clutch bell - A steel differential. - Aluminium shocks, dust protected - bead-lock rims with off-road tyres - aluminium rim driver - adjustable rear wing - Completely ballraced 2WD drivetrain - Water protected receiver box - ventilated double disc brake - aluminium chassis1 piece

€629.90* €839.90* (25% saved)
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Agency