9538/09 FG Brake rotors, 2 pcs.
€37.80
Currently unavailable
Replacement part for Mecatech twin piston hydraulic brake.Measures:Diameter 64 mmThickness 1.9 mm18 mm square
Product information "9538/09 FG Brake rotors, 2 pcs."
Item N° 9538/09
Brake rotors, 2 pcs.
Replacement part for MecaTech twin piston hydraulic brake.
Measures:
- Diameter 64 mm
- Thickness 1.9 mm
- 18 mm square
Login
Customers also bought
Item N° 6432 Steel pinion 18 teeth - 1pce.For combination with 46T main spur gear.Diameter 29,7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule: m=1,5
Item N° 6432/17 Steel gearwheel 17 teeth, profile displaced, 1 pce. True running steel pinion for minimized wear. Suitable for all FG cars except Formula 1. Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.
Genuine FG spare/option part. Part is delivered in silver or black color from vendor!Content:2 pieces
Genuine FG spare/option part.High-strength, coated dowel screws to fix the clutch blocks. Suitable for the standard clutch blocks and the Tuning clutch blocks.Contents:2 pieces
Genuine FG spare/option part.Replacement part for Mecatech Expert and Cross Hydro.
Genuine HT spare/option part. For fitment on additional engines or as a spare part for engine quick mount y1421. The engine flange is available in two versions:y1423/01 for all Zenoah and Chung Yang engines up to 30 cm³ with standard bolt pattern 50 x 36 mmy1423/02 for Zenoah G320 - For installation of a Zenoah G320 in a FG Evo (Model range from 2004 till 2014). Fits the standard quick mount.When mounting the motor flange the bolts/nuts must be tightened together in small steps. To mount the studs from y1421/01 or the screws from y1421/02 the use of thread locking compound (link) is required.Please note: y1423/01 does not fit in combination with Zenoah OEM clutch!
Customers also viewed
Genuine FG spare/option part. Low weight, temperature stability and a very good dosable progressive brake performance distinguish these GFK brake disks. Suitable for all FG models with hydraulic brake system. Only useable in connection with the steel brake lining .Dimensions:Diameter: 69 mmThickness: 1.4 mmContents:2 pieces
PRM premium quality epoxy brake discs. Material thickness is reduced for 0.1 mm to absorb tire debris or dirt easier!Dimensions: Outer diameter: 64 mmInternal dimension: 18 mm (square)Material thickness: 1,8 mm Suitable for:3002 Crosshydro hydraulic brake1001 Mecatech twin piston hydraulic brake FG Evo2020Content:2 Pieces
PRM premium quality epoxy brake discs Material thickness is reduced for 0.1 mm to absorb tire debris or dirt easier!Dimensions: Outer diameter: 64 mmSocket size: 18 mm (square)Material thickness: 1,8 mm Suitable for:3002 Crosshydro hydraulic brake1001 Mecatech twin piston hydraulic brakeContent:2 Pieces
Genuine FG spare/option part. Brake discs for the old twin disc setup.Dimensions:Diameter: 36 mmSquare size: 15 mmContents:2 pieces
Suitable for 39, 40 and 41 teeth main gear wheel.Measures:Diameter: 38,7 mmBore: 10 mmTotal width: 18 mmTooth width: 11,5 mmModule: m=1.5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.Content:1 piece
Genuine FG spare/option part. Reinforced front drive axle from M6 to M8 thread. Suitable for all 2WD Buggy models. For mounting the self-locking wheel nuts M8 Item No. 6115 are necessary.Length: 60 mm.Contents:1 piece