903215, Spark plug NGK CMR7A - 1pce.

Genuine FG spare/option part.The NGK Iridium high-tech spark plug allows for better smoothness, enhanced acceleration, reduced emissions and leads to a reduction in fuel consumption.In the model sports the high-tech metal iridium guarantees top performance.The iridium spark plug has several advantages. Its center electrode from the precious metal iridium is only 0.6 mm thin and very tough. Because the melting point of iridium is over 2400 ° C, it is extremely durable.Thread size M10 x 1Applications:Chung YangZenoah G230/240/260/270/290Contents:1 piece

Genuine FG spare/option part.Thread size M10 x 1 mm.Contents:1 piece

Genuine FG spare/option part. Thread size M10 x 1.Content:1 piece

Genuine Mecatech spare/option part for the FW01.Contents:1 piece

This drift car is based on the 4WD Sportsline chassis and is equipped as follows:Aluminum engine mount, aluminum spur gear carrier, low gear ratio, universal drive shafts, stiffer shocks and special slick tires.The high-quality polycarbonate body is a faithful replica of the BMW M3 E30.Option parts included:Large and small engine mount 66215 - 6485/01Front universal drive shafts 68415Aluminum spur gear carrier 7439Steel hub for brake disk 06042/05You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The RTR version of the car includes servos, transmitter, receiver, rechargeable batteries for transmitter / receiver.The 4WD Sportsline chassis opens up a new era within the Touring and Sportscar class of large scale model cars. Main target was the development of a chassis with supreme driving dynamics and ultimate performance. Maximum traction as well as easy handling, sufficient grip in curves, only a fourwheel powered model offers all these advantages. With the new 4WD Sportsline series FG Modellsport once again sets a trend at 1:5 scale.The 4WD Sportsline chassis is delivered with a wheelbase of 510mm. The fourwheel drive is carried out over an almost wear resistant tooth belt. 2 differential gears, tank with snap closure and a powerful engine with Tuning pipe turn the Sportsline 4WD chassis into a high-class 1:5 scale model with outstanding driving characteristics.You can choose this 4WD model with 2.4 GHz radio control system, servos, batteries in our configurator.The engine runs with a 2-stroke petrol-oil mixture. Through the installed pull-start system the engine can be started without any problems. A tank filling enables you to run your model around 45 minutes. Equipment and technical description of the 4WD Sportsline Mini Cooper:Solid 4mm chassis made of high-quality aluminium low-wear belt drive splash-proved 2 differential gears double wishbones at front and rear axle toe-in, castor and wheel camber adjustable at the axles - rear FG ball drive all steel driving components hardened all rotating parts ball-beared servo relieving servo saver front disk brake rear gear brake with big brake disk 700ccm fuel tank with snap closure oil-pressure shock absorbers with volume control and spring adjusting ring 26 cm³ combustion engine with Tuning pipe fabric hollow chamber tires with inserts receiver box and battery holder optional painted polycarbonate bodyshell with decals and with the RTR version the 2.4 GHz pistol grip radio control system with steering and gas servoDimensions:Length: 830 mmWidth: 405 mmHeight: 260 mmWheelbase: 510 mmWeight: 10,2 kgPainting tips:

The Leopard 2 Sportsline is the affordable entry into the 2WD competition class. You will hardly reckon the differences in construction compared to the bigger brother - the Leopard 2 Competition, just a few more plastic parts were used. Nevertheless this is no disadvantage at all! The Leopard 2 Sportsline offers ready-to-drive competition technology to a sensible price for beginners. The driving components are built on a 4mm aluminium chassis. The extremely long double wishbones at front and rear axle result in a vehicle width of 470mm. The long wheelbase of 530mm as well as the large-volume oil-pressure shock absorbers care for a balanced driving performance. The lateral splash-guard and the almost closed bodyshell prevent engine, servos a.s.o. from dirt. The model is equipped with a powerful 26 cm³ combustion engine with tuning pipe and ready oiled air-filter. The engine runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-start system the engine can be started without any difficulties. The RTR version is delivered with assembled and preset 2.4 GHz radio control system and rechargeable batteries, either with painted or clear bodyshell. To complete the non-RTR version with clear bodyshell all popular servos and radio control systems are suitable. You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery For an additional charge you can also select the HT-EDITION above. A great tuning offer for your new FG Sportsline. The standard price for the individual parts is €227.35. These tuning parts not only look great, but they also make your model more reliable.HT-Edition?HT-Edition means: this version comes with a big set of spare / option parts included.Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount bigCNC machined alloy engine mount, direkt replacement for the stock plastic part, heat and tweak resistant. They come with all necessary hardware included.Value: 64,95 EURAlloy spur gear carrierUse for 39T - 44 teeth spur gears.Value: 39,90 EURBall bearing set, sealed, set of 14The seal rings on sealed ball bearings keep dirt and dust out of the bearings. They are therefore particularly suitable for use in dirty and dusty environments.Value: 59,90 EURTotal value: 227,35 EURDimensions:Length: 750 mmWidth: 470 mmHeight: 330 mmWheelbase: 534 mmThe video shows the FG-Marder in terrain!

Complete tuned pipe system, will be delivered as shown with manifold, hose with clamps and variable mount. Fits FG and Carson touring cars / GTs with long wheel base.The tuned pipe is for a 535 wheelbase. The diameter is 51 mm and the complete length is about 300 mm.