8513/01 FG Stabilizer 5mm for 2-damper front axle

€23.90*

Available

Product number: fg_8513_01

EAN: 3410564522653

Product information "8513/01 FG Stabilizer 5mm for 2-damper front axle"

Genuine spare/option part.

5mm stabilizer for the 2-damper front axle, not adjustable.

Not suitable for Ecoline and Mono-Shock front axle.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

8514/08 FG Collet set 4mm - 4pcs.

Spare part for .Outer diameter 8 mmWidth 5 mm

€7.90*

8505 FG Mounting tool for bevel gear wheels - 1pce.

We essentially simplyfied the inserting of the differential bevel gear wheels with the mounting tool. Through the exact positioning of the bevel gear wheels it is guaranteed that the differential bevel wheel axle and the differential driving axle are in true alignment from the beginning.

€7.90*

8501/05 FG Alloy differential self-locking fourfold

Genuine FG spare/option part.In order to be able to transfer even more power and torque on to the rear wheels we distributed the valve effect over 4 friction disks by this quadruple self-locking differential gear.Suitable for all 1:5 models, Trucks, Formula 1 and Leopard.Please note: The differential comes unassembled, we recommend assembly tool: 8505 FG for bevel gear installation.Contents:1 set

€219.00*

8513 FG Stabilizer 4mm for 2-damper front axle

Genuine FG spare/option part.4mm stabilizer for the 2-damper front axle, not adjustable. Not suitable for Ecoline, Mono-Shock front axle and monster models with four shocks per axle.Contents:1 piece

€19.90*

8501/02 FG Thrust washer

Genuine FG spare/option part. Spare part for fourfold locking mechanic.Content:2 pieces

€19.95*

8514/05 FG Ball collet ring 7mm - 4pcs.

Spare part for .

€8.80*

8516/03 FG Wishbone pin 6x80mm - 2pcs.

Genuine FG spare/option part. Dimensions:Diameter: 6 mmLength: 80 mm2 pieces

€9.90*

8509/02 FG Transmission bush f. free wheel, 1 pce.

Genuine FG spare/option part.Replacement part for 68408 Front axle free wheel for 4WD

€24.30*

8506/01 FG Friction disk 45°

Genuine FG spare/option part. Spare part for FG order no. 8506.Contents:2 pieces

€41.80*

8514/06 FG Ball-and-socket joint 7 mm

Genuine FG spare/option part.Spare part for 8514 FG Stabilizer adjustable for 2-damper front axle.Contents:4 pieces

€6.50*

8511 FG Stabilizer front/rear for 1:5 Trucks 4mm - set

Stabilizer set for front and rear axle. Suitable for all 1:5 models, Race-Trucks, not for Mono-Shock axle.

€29.95*

8519/01 FG Stabilizer shaft 3mm with ball end - 1pce.

Spare part for .

€21.80*

Customers also viewed

y0735 Safety clip for Universal / JR / Futaba connectors

Genuine HT spare/option part. Protects the mated connection to prevent them from coming apart accidentally. Particularly recommended for direct power supply cords, as a tensile load on the cable can remove the link unnoticed and then you would perhaps think of a servo failure in the first place.The small size usually allows the installation even inside the receiver box.Also suitable for securing the connection of the receiver battery; the use of this clip means a big improvement in safety with little effort.Contents:1 piece

€1.50*

FG Challenge Line 2WD-510 with BMW M3 E30 body, 26 cm³ FG engine

With this robust and reliable FG chassis, which is equipped with a powerful 26 cm³ combustion engine, you get the ideal entry into the fascinating "royal class" of large scale RC models as well as into the competition.A roll cage was installed for more rigidity and protection of the vehicle.The model has a 510 wheelbase. The models are built on a 4 mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in.Further equipment points are differential gear, 24 teeth steel pinion, oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings.The remote control, the two servos and the receiver battery (RTR set!) are required to operate the FG model. This RTR equipment is available in our shop selection for an additional fee.The body shell is clear, but also available in a painted version in our shop selection for an additional fee.Thanks to the numerous available option parts, you can upgrade your FG Challenge Line as required.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Dimensions:Length: 870 mmWidth: 392 mmHeight: 260 mmWheelbase: 510 mm

From €929.90*

Configure now

66261 FG Front stabilizer 5mm 4WD

Genuine FG spare/option part.Contents:1 set

€23.90*

Details

9014 FG Body mounts

Genuine FG spare/option part. Contents:2 piece

€17.90*

Details

7407 FG CFRP supporting brace for Tuned pipe, set

Genuine FG spare/option part.Carbon fibre supporting brace with fittings and mounting material for the FG Competition, EVO and 1:5 Sportsline models 2WD and 4WD for a lateral fixing of Tuning pipes with a diameter of approx. 50 mm.

€35.90*