8458/01 FG Brake disks V2A - 2pcs.

€15.70*

Prices incl. VAT plus shipping costs

Available

Product number: fg_8458_01

EAN: 3410564521854

Product information "8458/01 FG Brake disks V2A - 2pcs."

Suitable for all mechanical FG disk brakes
Diameter 60 mm
18 mm square

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

y1337 Epoxy P-R-M Race brake discs for FG / Smartech / Carson

Top quality epoxy P-R-M Race brake discs with 10 dirt slots for removing dirt and abrasion, which will be transferred to the outside by the discs rotation. The epoxy P-R-M Race brake disc provides an optimal deceleration of the car without the unwanted fading (poor braking performance due to increased heat buildup)! The best braking action when using the epoxy P-R-M Race brake disc is achieved by the combination of the epoxy brake discs and steel brake pads (8456 or y19218). The epoxy P-R-M Race brake discs fit mechanical front and rear brakes on FG / Smartech / Carson cars with brake pads 8456 recommended for these applications.1 pair (2 pieces) Dimensions: Outer diameter: 60 mm Thickness: 2 mmsocket for 18 mm square wheel drive

€14.90*

8456 FG Steel brake pads - 2pcs.

Suitable for all mechanical disk brakes.

€9.50*

8458/02 FG Tuning Brake disk lasered

Spare part for , , , , and .Diameter 60 mm18 mm squareContent:2 pieces

€45.90*

TLR252011 TLR Brake Disc, Pad and Screw Set 5ive-B

Genuine TLR spare/option part.Spare part for TLR/Losi 5ive-BContents:1 set

€89.99*

8456/01 FG Alloy brake pads 97 - 2 pce.

Suitable for all mechanical disk brakes.

€10.90*

s054320, Smartech tuning brake Gas/Hell Devil/CRT 4x4/Thunderbolt / Titan, set

Set includes 2 rotors, 4 brake pads and 4 return springs. The steel rotors will last significantly longer on the differential drive cups, wear between rotors and brake pads is reduced as well.

€49.90*

AREA-BJ029/17 Alloy Brake caliper

area_bj029_17 Side: AREA-BJ029/17R Alloy Brake caliper right

Genuine AREA spare/option part.Fits AREA-BJ029 Front disc brake for HPI Baja 5 models.Not compatible with the steel version.Contents:1 piece

€14.90*

AREA-BJ029/11 Brake cable mount

Genuine AREA spare/option part.Fits AREA-BJ029 Front disc brake for HPI Baja 5 models.Contents:1 piece

€11.90*

Brake rotor, Baja premium brake, 2 pcs., y0005

Diameter 70 mm24 mm hex

€23.50*

Details

AREA-BJ030 Brake pads for HPI front brake

Genuine AREA spare/option part.Spare brake pads for AREA front disc brake AREA-BJ029 Front disc brake for HPI Baja 5 models, machined from billet 7075-T6 aluminum.Contents:1 piece

€39.90*

8457/03 FG Competition brake lining glued for FG and HPI disc brakes

Genuine FG spare/option part. New competition brake lining with good braking characteristics and low wear. Glued on a steel plate.Spare part for: 6250/05, 6250/06, 8450/05, 8452/05, 10452, 10453 and y0056 HT - Baja 5B/SS premium front disk brake.Measures:Length approx. 50 mmWidth approx. 10 mmThickness approx. 5.5 mmMounting hole distance 40 mmContents:4 pieces

€44.50*

8450/08, FG Conversion kit to Tuning disk brake f./r., set

Conversion kits to convert a front or rear disk brake to a Tuning disk brake for front or rear axle.Kit 06250/08 fits all rims from Ø100mmKit 08450/08 fits all rims up to Ø90mm.

€125.95*

Customers also viewed

32569 Brake disk

Genuine Smartech spare/option part.Dimensions: Diameter: 36 mm Square size: 15 mmContent:2 pieces

€19.90*

s054320, Smartech tuning brake Gas/Hell Devil/CRT 4x4/Thunderbolt / Titan, set

Set includes 2 rotors, 4 brake pads and 4 return springs. The steel rotors will last significantly longer on the differential drive cups, wear between rotors and brake pads is reduced as well.

€49.90*

9539/10 FG Brake disk for 9536, 2 pcs.

Genuine FG spare/option part.Replacement part for Mecatech Expert and Cross Hydro.

€25.80*

This product is no longer available.

32748 Brake disk front axle - 2pce.

Diameter 60 mmSquare 18.15 mmThickness 1.6 mm

€19.90*

FG Off-Road Buggy 2WD WB535, HT-Edition

The FG Off-Road Buggy WB535 is presented with a longer wheelbase and a pleasant design. All-wheel-drive, completely mounted ready-to-drive, combined with the open Off-Road Buggy body shell with metal roll cage and gigantic Off-Road rims with low-profile knobbed tires.The body shell is standard unpainted. Equipped with a 26cm³ engine the Off-Road Buggy is aggressive and also a tremendous jumper. The 35 mm wheelbase extension results in a higher tracking stability. You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Equipment of the modelAngled 4 mm, alloy chassis, completely covered belt drive, two differential gears at front and rear axle with hardened bevel gearwheels, closed front axle housing, front bumper, double wishbones at front and rear axle, gear brake, adjustable right/left thread rods at the track rods and at the front and rear wishbones, front uprights with steering stops, gearwheels made of case-hardened steel, completely ballbeared, four large-volume oil-pressure shock absorbers, receiver box.According to side rails and the closed body shell the Off-Road Buggy is almost protected against dirt from underneath. The two-parts body shell is made of polycarbonate, the rear spoiler is made of impact resistant polyamide. Driver´s coverage and roll cage parts are made of aluminum. The giant low-profile knobbed tires are glued on black rims.The model is equipped with a powerful 26cm³ (series) combustion engine with ready-for-use oiled air filter. The engine runs with normal 2-stroke petrol-oil mixture (available at every patrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-stat system the engine can be started without any difficulties. HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount bigCNC machined alloy engine mount, direkt replacement for the stock plastic part, heat and tweak resistant. They come with all necessary hardware included. Value: 64,95 EUR Alloy spur gear carrierUse for 39T - 44 teeth spur gears.Value: 39,90 EUR Ball bearing set, sealed, set of 14The seal rings on sealed ball bearings keep dirt and dust out of the bearings. They are therefore particularly suitable for use in dirty and dusty environments.Value: 59,90 EURTotal value: 227,35 EURThe RTR version is delivered with installed and preset radio control system and rechargeable batteries. To complete the non-RTR version all popular servos and radio control systems are suitable.The pictures may display the car with some optional items which are not included, like bed-mounted rollbar, lights, front bumper or mirrors. These items can be added in the drop down menus.Measures:Length: 770 mmWidth: 480 mmHeight: 280 mmWheelbase: 535 mmWeight: 10,8 kg

€1,049.90*

Configure now

68532 FG Conversion kit FG Off-Road Buggy 4WD to 4WD WB535, set

Genuine FG spare/option part.This conversion kit includes all necessary parts to convert a 4WD Off-Road Buggy with a wheelbase of 500mm to a 4WD Off-Road Buggy WB535 with a wheelbase of 535mm. The bodyshell is not included, the existing bodyshell can be adapted.

€279.95*

68501 FG 4WD conversion kit for 2WD Marder

Genuine FG spare/option part. Fits FG 2WD Marder.Offer your Marder a new life - it will be out of all recognition! Aggressive in the curves, dead on the line - just everything which guarantees pure driving fun. The well-tried 4WD by FG is now available as conversion kit for your 2WD Marder. You will not realize from the outside that the model is equipped with a fourwheel drive. But you and your rc-car friends will notice it considerably as soon as you start your model and speed up properly.The conversion kit includes all parts necessary to convert your 2WD Marder to a 4WD Buggy. A mounting instruction is enclosed.Please note: the radio plate is designed to accept a 805-sized servo (case length 65 mm). For installation of a Rhino (case length 58 mm) or a similar sized servo you need to order radioplate 68241 separately.Contents:1 set

€424.95*